Barracuda

This accurate, detailed cast resin 5 blade spinner and late style 11? diameter prop greatly improve the Airfix Spitfire 22/24 and Seafire 46/47 kits. The kit blades have too much twist and are oddly shaped. A highly visible upgrade. May be adapted to fit other Griffon Spitfire kits...

"Angie" P-47D-27-RE, serial number 42-26860 512th FS, 406th FG, 9th Air Force. Flown by Col. Anthony Grosetta. Based at Asch, Belgium, early 1945. Natural metal with yellow trim and Polished OD (not black) tailplanes. Note Curtiss Electric 13" paddle bladed propeller and lighter blue stripe on tail...

The set contains two super detailed 1:72 scale wicker seats that were sometimes installed in a number of WWI British aircraft. Sopwith Camel, Pup, Triplane, S.E.5, DH.2, R.E.8, and more. They were a special order item from a catalogue, and were well liked by RFC pilots. Master patterns by Michael O'..

This set contains 2 resin nose wheels and 8 mainwheels. It features detailed hubs, accurate radial tire tread with data and logos on the sidewalls. Directly replaces the kit parts. Designed for the Monogram B-1B kit, but will fit the Airfix kit as well. An easy installation that will make your B-1B ..

This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and the set includes new instrument faces for the instrument panel, a few cockpit placards and even some decals for the radios. Printed by Cartograf, the..

This set includes two resin cast vertical F.24 camera faces, and one oblique F.24 camera (front and back inserts) for all PR/FR Spitfires and other RAF, FAA aircraft. Add some visible detail through the clear camera ports by replicating the front face of the cameras within. Quick and easy!..

This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. A mass of tiny decals recreate the extensive markings found in the cockpit, from the North American Data Plates down to the tiny PULL marking on the droptank release handle. Instrument faces are not included, b..

The set is designed for the superb Eduard MiG-21 series. The kit radome is accurate and well molded. The separate radome and bulkhead allow you to assemble the fuselage without the radome, which is then installed when the model is almost finished. This will allow you to fill and sand the intake seam..

This set consists of a pair of accurate resin mainwheels featuring super detailed spoked hubs, subtly ribbed tires and readable logo and data as fitted to the Bf 109E and F series aircraft. a nice upgrade for all 1/48 Me/Bf 109E and F kits...

This set contains a much more detailed and accurate pair of intake fronts designed for the Hasegawa Typhoon, one standard and one with a dust filter fitted with cuckoo clock doors. Also included are two sets of detailed, hollowed out exhausts, both faired and unfaired. may also be made to fit the Mo..

This set consists of a pair of super detailed, accurate mainwheels as fitted to Series 1 Tempest Mk. Vs. The wheels feature subtle tire beading, logo and size data, as well as accurate front and rear hubs. Designed as a direct replacement for the kit wheels, this is a fast and easy upgrade...

This set consists of a pair of super detailed, accurate 4-slot wheels with staggered block tread tyres fitted to postwar Tempests operating from improved runways. Wheels feature fine logo, tire data and beading detail. An easy and very visible upgrade for the new tool Eduard and all other Tempest ki..

Contains a new radiator front casting with the concentric ring type intake shroud that is missing from the new Eduard Tempest V kit. Tempests not fitted with dust filters would always be fitted with the shrouding to prevent hot radiator air from entering the carburettor intake. An alternate dust fil..

This set consists of new resin main and nose wheels, featuring accurate hub detail and tires with detailed data and circumferential tread pattern. The nose wheel is correctly spoked, unlike the Airfix kit part. A quick and easy upgrade for your Airfix Hunters. Can be fit to the Academy kit with some..

This set contains new resin wheels with detailed hubs, accurate tread, tire data and logos. Designed to fit the Airfix Meteor Mk 8. These wheels were also fitted to all later marks. They can be modified to upgrade the Classic Airframes and Aeroclub Meteor kits...

This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and the set includes new instrument faces for the instrument panel, a few cockpit placards and even some decals for the radios. Printed by Cartograf, the..

This set contains a complete set of accurate and detailed wheels for the B-1B: 2 nose wheels and 8 main wheels superbly cast in resin?to improve and replace the problematic rubber/plastic tyre assemblies supplied in the kit. A real upgrade over the kit wheels. Designed for the Revell B-1B kit...

This set contains a number of parts necessary to allow you to build any of the more modern B-1B configurations. The Revell kit, built out of the box, only allows you to build early B-1Bs. Included are accurate, detailed resin parts consisting of 2 towed decoy fairings, the late DAS fairing mounted o..

This set contains a pair of accurate resin cast intake fairings to replace the poorly shaped and basic kit intakes. These new intakes feature the auxiliary intake lips molded in the extended position, as they were frequently seen on the ground. Also included are 4 beautifully detailed intake covers ..

Two detailed resin seats with seat pad and molded in seatbelts designed for all Albatros fighters. Why fight with bending and gluing photoetched seatbelts" Simply paint and install for a very realistic seat with naturally draped harness. Will also work for many other German WWI aircraft...

This set consists of a pair of accurate, super detailed British T1154 (transmitter) and R1155 (receiver) radios with separately molded knobs for ease of painting, and full stencil, placard and dial decals. Electrical connectors are also supplied along with full colour, illustrated instruction that i..

This set consists of a pair of accurate, super detailed British T1154 (transmitter) and R1155 (receiver) radios with separately molded knobs for ease of painting, and full stencil, placard and dial decals. Electrical connectors are also supplied along with full colour, illustrated instruction that i..

Super detailed resin wheels with the late production stamped wheel hub and ribbed tires as fitted to late model F6F, F4U, Warbirds, and Air Racers. A simple upgrade for all Corsair and Hellcat kits...

This set contains a super detailed resin wicker seat with open weave strip and a choice of both plain leather and tufted 5 button padded seat cushion. This set replaces the kit seat with a very simple modification to the kit floor in the WNW Sopwith Camel. A big visual improvement for a few minutes ..

This set contains nearly 50 tiny stencil markings that replicate nearly all of the markings found in the wartime F4U-1, -1A and -1D Corsair cockpits. These markings will really bring the cockpit to life. Not for the faint of heart, but the hours you spend adding these tiny decals will be time well s..

This set consists of an accurate one piece, seamless resin carburetor intake duct and shroud. It replaces the somewhat crude multi-part duct found in the otherwise very nice PCM Tempest V. Also fitted to many Typhoons and other Tempest V kits...

This treaded tire was fitted to Australian Mk. V Spitfires, and any other Spitfire with 5 slot wheels that needed additional traction due to harsh operating conditions. This style of tread was referred to a Z-block, for the distinctive Z shaped tread blocks that wrapped onto the side walls. The trea..

This set contains a pair of new resin wing sections featuring accurate intake & exhaust ramps to replace the flat wing sections in the kit. Also included are new detailed radiator fairings and radiator faces to replace the less detailed kit parts. Clear, illustrated step by step instructions walk yo..

This little upgrade set consists of a super-detailed Mark II reflector Gunsight and the later Ace Maker II Gyro Gunsight, as well as the dedicated gunsight mounts for each type. Further detail is provided by the junction box, dimmer control and throttle with twistgrip that allows the pilot to adjust..

This set consists of a new resin cast cockpit door with separate crowbar that actually fits into the door's clips. Detailed down to the door latch springs, this little part is highly visible, so all that added detail really pays off. Will also upgrade all other 1/32nd Spitfire models, such as the Ha..

As fitted to Spitfires Mk. I through the early Mk. IX. The 5 slot wheels in the Tamiya kit are superb, but the soft rubber tyres (British spelling for a British aircraft!) have a mold parting line that is very difficult to get rid of, plus they have a natural tendency to attract every piece of dirt ..

The Tamiya kit instrument panel is replaced with a mixed media parts featuring a resin main panel with improved knobs and switches. The main instrument panel has been replaced with a multi-part photoetched assembly with readable and authentic film dials. The instrument bezels have been etched separa..

This upgrade set contains a number of cockpit components that benefit from being produced in resin, allowing more accurate and detailed parts for your P-51 Mustang's cockpit. Fully detailed radio and batteries come complete with a battery wiring diagram. The radio includes resin wiring harness parts..

This set consists of new super detailed, accurate resin sidewalls, which replace the Tamiya kit parts. Many handles and levers have been molded separately to ease painting and improve accuracy. A fret of photoetched parts rounds out this set, and it includes a number of cockpit details such as canop..

This set contains new, more accurate diamond tread tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, an..

Replace the kit main wheels with these superb resin wheels that feature accurate staggered block tread pattern and detailed hubs. Real P-51 wheels have see-through hubs, and you can easily open the slots and holes on these wheels by cutting away the thin flash, resulting in a very prototypical look...

This sheet contains new, sharply printed gauge faces to replace the kit decal instruments, plus all of the many other stencils and placards found in the Mosquito cockpit. A simple and fun way to add a lot of visual interest to your Mosquito cockpit. Designed by Chris Busbridge. Printed by Cartograf..

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is smooth; by far the most common tire seen on Spitfires. For Mk VII thru 21 Spitfires operation from grass or dirt runways. Also fitted to some Seafire kits. These wheels are desig..

This set contains a resin jig that will allow you to center drill the spinner from BR32122 Bf 109G-6 Prop and Spinner and BR-32123 Bf-109G-10 Prop and Spinner. It also contains a blade alignment jig for the standard 109G-6 type prop blade as well as the wider paddle G-10 style blade. This set is che..

This set contains a new seamless resin supercharger intake, separate hollow cooling scoops and accurate and detailed exhausts with recessed openings to replace the kit items in the Revell G-10. Filling the seams inside the intake is a tricky and time consuming process. We have saved you from having ..

This set contains a new resin prop and spinner to replace the kit items in the Revell kit or any 109 from the F-4 through the G-14. Barracuda resin spinner is very accurate in shape and detail. The misshapen kit blades are replaced with very accurate resin versions which will make a big improvement ..

This set contains one accurate and very strong lost wax cast brass tall tail strut and two styles of detailed tailwheels in resin, both smooth and radial tread tire versions. This brass strut will not bend over time like white metal can. Can be fit to all late model Bf 109G/K kits in 1:32 scale. A q..

This set consists of one detailed, accurate upper cowling. This set improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell's Bf 109G-6 kit part. For non-Erla built Bf-109G-6s. A one piece, easy to install correction for the Revell kit. Pattern..

This set consists of one detailed, accurate upper cowling specific to the Erla built 109G-5 and G-6 aircraft. The gun troughs are different on these Erla built machines. Erla upper cowlings have a rectangular panel line around them. This set also improves the detail and corrects the spacing of the m..

This set consists of a pair of super detailed, accurate resin mainwheels as fitted to the Bf 109G-5 through G-14 series aircraft. These wheels represent the later fit of the plain tire fitted to the plain, ribless hub. Finely rendered raised tire data is featured. Will upgrade any 1/32nd Bf 109G kit..

The set consists of new resin ailerons, elevators and standard rudder for the Revell kit. Why did we make them? The kit parts have nice fabric rib tape detail, but it is overstated, and the trailing edges are quite thick when assembled. It takes a good bit of careful sanding and shaping to thin the ..

This set is designed to correct the nose, radiator, prop and spinner on the otherwise stunning Special Hobby Tempest V. The problem with the nose is that the spinner baseplate diameter is too big by about 2 inches. This throws out the taper of the forward cowling. The radiator opening is also too bi..

Contains an accurate Aeroproducts Bearcat prop, consisting of four accurately shaped blades and detailed hub with backplate, to replace the inaccurate prop assembly in Trumpeter's Bearcat kit. Props can make or break the look of a model. An easy and highly visible upgrade...