Barracuda
Brand: Barracuda
SKU: BAR BR-72353
This set contains two accurate resin mainwheels with ribbed tires, separate six holed wheel hubs to represent the correct hollow look under the hubcap, and detailed tire logo and data. This wheel was fitted to all Fw 190A-1 to A-5, and some early A-6s. For Hasegawa, Tamiya and Eduard early Fw-190A k..
US$6.72
31 % OFF
US$4.58
Brand: Barracuda
SKU: BAR BR-48387
Super detailed, properly sized and proportioned resin mainwheels as fitted to the Bf 109G-5 through G-14 series aircraft. A easy upgrade for the Eduard, Zvezda, Hasegawa, Tamiya, Otaki and other 1/48 Gustav kits. Designed by Gunnar Jansson...
US$8.07
25 % OFF
US$6.00
Brand: Barracuda
SKU: BAR BR-48388
Super detailed, properly sized and proportioned resin mainwheels as fitted to the Bf 109G-5 through G-14 series aircraft. A easy upgrade for the Eduard, Zvezda, Hasegawa, Tamiya, Otaki and other 1/48 Gustav kits. Designed by Gunnar Jansson...
US$8.07
30 % OFF
US$5.64
Out Of Stock
Brand: Barracuda
SKU: BAR BC-32365
This set consists of a decal sheet that gives you all the small stencils and placards typically found in Bf 109G cockpits. It also includes a beautifully detailed resin instrument casting that can be painted up and a choice of two different printings of the instrument faces: Scale instrument marking..
US$11.44
19 % OFF
US$9.17
Out Of Stock
Brand: Barracuda
SKU: BAR BM-72324
This set contains a sheet of precut Kabuki type tape canopy masks for the Monogram B-1B Lancer kit. Includes masks for both the canopy clear panels and the sealing strips that surround each panel. It also comes with masks for the D-shaped flush DAS antennas that replaced the thick blade antennas loc..
US$8.07
20 % OFF
US$6.44
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72455
This set consists of a pair of accurately shaped, thin, distortion free, vacform sliding hoods to model an open canopy for your Spitfires. If you want to display your Spitfire with the canopy slid back, a vac hood will dramatically improve the look, as kit canopies are thick and will not fit over th..
US$8.07
20 % OFF
US$6.44
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72516
This set consists of three accurate, late style control columns as fitted to cannon armed Spitfires of all marks. It has the rectangular three position trigger switch as fitted to all Spitfires and Seafires from the Mk Vb on, including the PR variants. The column is molded complete with very fine pn..
US$10.09
17 % OFF
US$8.28
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72515
This set consists of three accurate, late style control columns as fitted to early machine gun only Spitfires. It has the round single trigger switch as fitted to the Mk I through Mk Va, including the early PR variants. The column is molded complete with very fine pneumatic hoses for the gun firing ..
US$10.09
17 % OFF
US$8.28
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72301
This set contains 2 detailed, accurate wing gloves to plug the large openings created when the wings are swept forward. Some cutting and fitting is required, but the result is a huge visual improvement to the model. Designed for the Monogram B-1B kit, but may be adapted for the Airfix. Complete with..
US$14.82
19 % OFF
US$11.97
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72296
This set contains a new, accurate radome, a replacement tailcone with towed decoy fairings, a corrected tailplane fairing, Defensive Avionics System fairing and antennas, and separate flow vanes. The Monogram kit represents a very early production B-1B and the nose shape is wrong. This set will allo..
US$31.02
17 % OFF
US$25.47
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72298
This set contains parts to correct the rear of the kit nacelles and inner wing root, as well as accurate exhausts with separate flame holders and super detailed afterburners nozzles. It also includes separate radius rods (with many spares), guide vanes and APU exhaust ducts. A huge detail upgrade fo..
US$43.17
18 % OFF
US$35.28
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72462
This set consists of a crystal clear vacformed bomber style canopy with bulged side windows as used on many B Mk. XVI and Mk. 35 Mosquitos. It features bulged side windows, finer frames and no external frames on the rear portion of the canopy, as the frames are internal on the real aircraft. A big u..
US$6.72
22 % OFF
US$5.22
Out Of Stock
Brand: Barracuda
SKU: BAR BC-72165
This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and the set includes new instrument faces for the instrument panel, a few cockpit placards and even some decals for the radios. Printed by Cartograf, the..
US$9.42
22 % OFF
US$7.33
Out Of Stock
Brand: Barracuda
SKU: BAR BR-72212
This set contains a complete, detailed resin cockpit for the EE/BAC Lightning F.6. It has been exhaustively researched to be as accurate as possible. The set contains a complete cockpit including Mk.4 seat with belts, coaming, canopy interior details and opening piston. Installation is quick and eas..
US$16.17
18 % OFF
US$13.19
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48395
This set consists of new resin main wheels for Ta-152H and some later production Ta-152Cs. They feature detailed tires with fine tire beading, logo and data, and accurate hub detail with molded in front hub brake cables. A big and easy detail upgrade for your Trimaster, Dragon or Zokei Mura Ta-152 k..
US$11.44
19 % OFF
US$9.17
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48195
Very little modification of the kit parts is needed to install the 27 tiny parts in this set. Cockpit door, retract quadrant, 2 types of throttle, 2 types of gunsight, two types of seatbelts molded into the seat castings and a host of other small parts are supported by a new film dial sheet with muc..
US$18.19
17 % OFF
US$15.03
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48191
This set contains a seamless one-piece upper cowling for the Eduard Spitfire Mk. IX and Mk.VIII kit. The kit cowling is molded in two parts. A simple, one piece, drop-fit replacement part that helps you get on to the fun part. Also perfect for conversions to Mks VII, X and XI...
US$10.09
17 % OFF
US$8.28
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48476
This set contains highly accurate and detailed replacement resin parts for the cockpit door, gunsight, stick, throttle and retract quadrants, seat with molded-in belts, and other detail parts. Also included is a sheet of cockpit stencil decals. It is designed to install quickly and easily in the Edu..
US$18.19
17 % OFF
US$15.03
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48506
This stick is suitable for every Spitfire from The Mk Vb on through the Seafire FR 47. The spade grip features the rectangular housing for the 3 position trigger switch, and a molded on brake lever.This control column is offered in 3 versions. With and without gun camera button and a third versi..
US$12.79
20 % OFF
US$10.13
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48349
This set consists of a new engine front with much improved detail, and a new correctly shaped spinner for the 1/48th Airfix Sea Fury. The kit spinner is too blunt. The parts are designed to be a drop fit replacement for the kit parts, though we highly recommend using this set in conjunction with our..
US$18.19
17 % OFF
US$15.03
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48343
This set consists of a pair of Sea Fury main wheels with diamond tread, a very common tread pattern for earlier Sea Furies, and could be found on Sea Furies throughout it's service life. The hubs are beautifully detailed and the tyres are complete with fine beading and readable tire data. Separate c..
US$10.09
17 % OFF
US$8.28
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48344
This set consists of a pair of Sea Fury main wheels with staggered block tread. This style was seen very commonly on Sea Furies during the Korean conflict and serving with foreign air forces. The hubs are beautifully detailed and the tyres are complete with fine beading and readable tire data. Separ..
US$10.09
17 % OFF
US$8.28
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48527
This set contains four super detailed, 3D printed 2-tier rockets and rails, as carried by Sea Furies and other a/c (8 rockets in 4 pairs). The rockets and rails are printed as one piece and the folded metal clips that hold the rocket to the rail are not molded solid, but accurately represent the ope..
US$18.19
17 % OFF
US$15.03
Out Of Stock
Brand: Barracuda
SKU: BAR BR-48499
This set contains a pair of accurate 3D printed mainwheels with diamond tread tires, complete with period accurate logo and tire data. The hubs are printed separately to preserve the see-through effect of the real wheel hub. Two rear hub styles are supplied, allowing these wheels to be fitted to P-5..
US$11.44
19 % OFF
US$9.17
