Alclad

The PRISMATIC finishes require a dark base coat-use ALCLAD GLOSS BLACK BASE. Apply 2-3 light coats. When completely dry finish with 2-3 coats of ALCLAD CLEAR BASE. ALCLAD HOLOMATIC SPECTRAL CHROME should be applied over ALCLAD GLOSS BLACK BASE. Apply 1-2 light coats. When completely dry finish with ..

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

Apply one of these primers before using High Shine ALCLAD:- ALCLAD GLOSS BLACK BASE ALC-304/305- ALCLAD CLEAR BASE ALC-303 (Other hobby enamel paints are suitable-it is advisable to conduct a test on scrap plastic)PREPARATION AND SPRAYINGThe surfaces to be painted must be thoroughly clean and free ..

Apply one of these primers before using High Shine ALCLAD:- ALCLAD GLOSS BLACK BASE ALC-304/305- ALCLAD CLEAR BASE ALC-303 (Other hobby enamel paints are suitable-it is advisable to conduct a test on scrap plastic)PREPARATION AND SPRAYINGThe surfaces to be painted must be thoroughly clean and free ..

Apply one of these primers before using High Shine ALCLAD:- ALCLAD GLOSS BLACK BASE ALC-304/305- ALCLAD CLEAR BASE ALC-303 (Other hobby enamel paints are suitable-it is advisable to conduct a test on scrap plastic)PREPARATION AND SPRAYINGThe surfaces to be painted must be thoroughly clean and free ..

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat.Ap..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat.Ap..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

..

This is a transparent green-blue coating to tint bullett resistant glass on military aircraft-it can also be used to create the sun-vizor band on car windscreens-this is an oil (mineral spirit/white spirit) based coating not a solvent lacquer...

..

Apply one of these primers before using High Shine ALCLAD: - ALCLAD GLOSS BLACK BASE ALC-304/305 - ALCLAD CLEAR BASE ALC-303 (Other hobby enamel paints are suitable-it is advisable to conduct a test on scrap plastic)PREPARATION AND SPRAYING The surfaces to be painted must be thoroughly cle..

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

Apply one of these primers before using High Shine ALCLAD:- ALCLAD GLOSS BLACK BASE ALC-304/305- ALCLAD CLEAR BASE ALC-303 (Other hobby enamel paints are suitable-it is advisable to conduct a test on scrap plastic)PREPARATION AND SPRAYINGThe surfaces to be painted must be thoroughly clean and free ..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

Pack Content: 1 x 3200 Grade 1 x 4000 Grade 1 x 6000 Grade 1 x 8000 Grade 1 x 12000 Grade 1 x Foam Rubber Polishing Pad..

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

This is a water based clear which was developed to seal Alclad Chrome and other Hi-Shine finishes-it is airbrush ready and dries in 15 minutes. Aqua Gloss Clear can also be used as a gloss coat over matte paints before decaling,canopies and clear plastic parts can be dipped in it to improve clarity ..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

..

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat.Ap..

Shake thoroughly before use. Do not thin. Surfaces must be completely clean. Apply 1 medium coat at 20-30PSI to clean bare plastic. Dry time 15-30 minutes. As the carrier evaporates the shine will develop. Allow to cure for 1 hour before coating with Alclad Candy Enamels. Avoid using in excessively ..

..

..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

..

..

..

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

Apply one of these primers before using High Shine ALCLAD: - ALCLAD GLOSS BLACK BASE ALC-304/305 - ALCLAD CLEAR BASE ALC-303 (Other hobby enamel paints are suitable-it is advisable to conduct a test on scrap plastic)PREPARATION AND SPRAYING The surfaces to be painted must be thoroughly cle..

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

APPLICATION GUIDE-PLASTIC MODELS:For use on injection plastic kits a primer is necessary.High-Shine ALCLAD finishes require a glossy base coat.Apply one of these primers before using High Shine ALCLAD:ALCLAD GLOSS BLACK BASE ALC-304/305ALCLAD CLEAR BASE ALC-303PREPARATION AND SPRAYINGThe surfaces to..

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

..

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

NOTE: Due to its Highly Flammable purpose, all alclad products can only be shipped within Australia. Thanks for your understanding...