Hobby Tools & Supplies

..

Brand New Manufacturer: Griffon Model General Tool Set Useful to folding workable hinges & handles of various sizes Suit for All Brand Kits ..

Eloxed aluminium base with stainless steel rods...

The 125mm long micro roller with different steps and conical end.Features:- Diameter: 1, 2, 3, 4, 5, 6 mm- Conical: 0-6 mm..

..

Piranha Series - The sharpest photo-etched tools in the world.Product Features:- Delivers professional result- Long lasting design- Easy to use- Made of steel- Made in EUThere are other two sizes available: PIR-195 - 19.5cm and PIR-300 - 30.0cm...

..

Handle bending toolTool designed: Tool for aluminium and brass wire bendingTool material: galvanized steel..

Tool designed: bending tool for photo etch, and aluminium parts..

roller 2 - for photoetched parts - diameters 12,7 ; 7,62 ; 6,35 ; 5,08 ; 3,18 ; 1,7 mm..

roller1 - for photoetched parts - diameters 9,53 ; 8,26 ; 6,99 ; 5,72 ; 4,45 ; 2,45 ; 1,25 mm..

Loaded with Features in a Tight little Package! Perfect for close-up work! Little bends are no problem when using the "Bug"!- 2" x 2.5" Base with a Full 2" Square Tool Head - Small but Mighty - this baby is Fully LOADED with Features - Designed for fine gauged PE found in 1:700 scale ship sets..

Adding photo-etched parts is one of the best ways to give your model a professional-level finish, ensuring that it stands out from the pack. However, we all know that working with stainless metal parts can be trickier than with standard plastic parts. Tamiya is offering the following 3 craft tools t..

..

Piranha Series - The sharpest photo-etched tools in the world.Product Features:- Delivers professional result- Long lasting design- Easy to use- Made of steel- Made in EUThere are other two sizes available: PIR-135 - 13.5cm and PIR-300 - 30.0cm...

Can be used with photo-etched sheet to make metal gun barrels, etc.Material: MetalTotal length: 195mmDiameters: 4, 6, 8, 10, 12, 15, 20mm*NOTE: This item does not include photo-etched sheet...

Tool designed: bending tool for photo etch, and aluminium parts..

Tool designed: bending tool for photo etch, and aluminium parts..

Ultimate Modeller photo-etch placer is a re-usable wax based positioning stick that will help you to hold and place even the smallest piece of photo-etch or styrene. A real helping hand when dealing with the more fiddly side of modelling...

Use for removing larger pieces from the PE frets. Especially useful for Ship builders and Railroad hobbyists.Features: - Two 8" x 10" black Plexiglas bases - Clear Press with Knob - 1 Large & 1 Small - Especially useful for large Naval and Railroad projects. - Makes removing PE parts from th..

Excellent for radius, U-Shape or cylinder shaped parts.- Includes the following 12 diameters of dowels: - Wood - 3/4", 5/8", 1/2", 7/16", 3/8", 5/16", 1/4" & 3/16" - Steel .125", .09375", .078" & .0625" - 3.5" x 3.5" Base CNC Machined from high grade aluminum - Machined channels are perfect ..

Remove parts easily from the Photo Etch frets.Features: - Three 4" x 4" black Plexiglas bases - Clear Press with Knob - Makes removing PE parts from the fret a cinch! - Close accurate cuts mean little or no clean up - Blade won't skip or break like when cutting on Glass. - Clear press allo..

- 5" Folding blade in safety case included! - Dual Knobs = Flatter and Higher Pressure Clamping - Gives extra clamping ability needed on longer Photoetch - 2 outer guide pins allow Pass-thru for long parts - 16 Bending Finger Options - Easy to handle in the hand or on the Bench - Longer Finger..

- Base is 2" Square with a 1.5" Spring-loaded Tool Head - Handles the Smallest most difficult Photo Etch of ANY scale with Speed & Ease - Ideal for 1:72 Aircraft scales - Great for Small Detail Photo Etch for Ship builders - A favorite of Z Scale Rail builders - 6 sizes of finger widths - Cut..

- Excellent for shaping radius, U-Shape or cylinder parts. - Includes one each Aluminum rods 3/4", 1/2" & 1/4" - Includes one each Stainless Steel rods 1/8" & 3/16" - 4" x 4" CNC Machined Rolling Base - High grade aluminum hard anodized in a clear finish. - Machined channels are perfect for you..

For bending and folding PE parts. Complements the 8" Tool head Workstation.Features: - Using the correct blade helps you fold longer parts easier - Beveled edge to make perfect folds on your PE parts...

The "Workhorse" for photo etch under 4" long. The "ginal" photo etch bender improved!- 4" Folding blade in safety case included! - Especially effective in 1:35 and 1:48 scales armor scales - 1:24 and 1:43 scale autos - 1:32 and 1:48 scale aircraft - Three levels (1/16, 1/8, 1/4) to allow cha..

Bending Plate for P.E. Parts. Contains multiple lengths and sizes for easy bending...

Medium size Photo etched bender tool. 79mm x 59mm..

Tool for shaping photo-etched parts, thin aluminium sheet or other malleable materials.. The rolling rods are made of stainless steel. The base is made of an aluminium alloy and is finely carved. The surface received anodizing and sandblasting treatment. In the model making and detailing process, we..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..

Large size Photo etched bender tool.162mm x 79mm..

Dimensions: 6.5cm x 5cm..

DSPIAE precision photo etched parts bender can effectively satisfy requirements for manufacturing of various photo etched parts. Precision photo etched parts bender is composed by aluminum alloy stainless steel. Photo etched parts bender is equipped with two working tables in different materials. Th..

P.E. Bending plate with various sizes..

..

Small size Photo etched bender tool. 59mm x 59mm..

This is an attachment for the Flip-R10 folding tools. This is an expansion tool for the Flip-R10 (RB-T001)This tool can be used to make handles, ship ladders, etc. The tool is marked with measurements that make replicating such parts very easy. The handle dimensions can range from 1mm to 20.5mm...