Hobby Zone

The Paints Module 26mm has thirty six holes for paints or other bottles with a diameter of 26mm. Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15cmMain feature:- 36 holes..

The Paints Module 36mm has twenty six holes for paints or other bottles with a diameter of 36mm.Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15cmMain feature:- 26 holes ..

Thanks to stable holders splashing paint is practically impossible. The set includes perfect fitting parts to make a stand, and installation takes only a few moments. Main feature:- 81 holes for bottles with a diameter of 36mm. Dimensions: 60cm x 23cm x 14cm Large Paint Stand fit to following paint..

Corner Large Paint Stand 26mm is compatible with standard Large Paint Stand - S2. Thanks to its construction with an angle of 90 degrees, you can maximize the use of your workplace The set consists of perfectly matched elements. Installation of Corner Large Paint Stand will only takes a few moments..

The module has three drawers with separators. That allow you to make your own space configuration in each of drawer.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15cmMain features: - 3 x drawers (27.4cm x 13.2cm x 3.4cm)- 15 x separators, to make your..

The Module has six drawers with windows made ??of acrylic glass.The Module is designed to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15cmMain feature: - 6 x drawers (8cm x 13cm x 6cm)To connect modules use magnets that are included. Thanks to this solution, you ..

The Corner Shelves Module has two shelves. This module changes the angle by 90 degrees of Modular Workshop System.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 30cm x 15cmMain feature:- 2 x shelvesTo connect modules use magnets that are included. Thanks to t..

The Brushes and Tools Module has a lot of holes in different sizes for tools. It also has a built-in roller for hanging pincers, pliers, clamps, etc..Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products of Modular Workshop System.D..

The OM12 end corner shelves module is made from machine cut (not laser cut) plywood or MDF (dense particle board) wood. This module serves as either an end module or as a corner module to change the arrangement of the Modular Workshop System by 90 degrees. The OM12 can be stacked atop the OM11 modul..

The OM11 end corner drawers module is made from machine cut (not laser cut) plywood or MDF (dense particle board) wood. This module serves as either an end module or as a corner module to change the arrangement of the Modular Workshop System by 90 degrees. The OM11 can be stacked with the OM12 modul..

Oil Paints Module has twenty eight holes for paint in tubes.Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15cmMain feature:- 28 x 15mm handle ( diameter between cap and tu..

The Brushes and Tools Module has a lot of holes in different sizes for tools. It also has a built-in roller for hanging pincers, pliers, clamps, etc.. The Module to connect with other products of Modular Workshop System. Dimensions: 30cm x 15cm x 15 cm Main features: - 10 x holes of 14 mm - 26 ..

With the use of waterline marker tool you will be able to make a straight line on the same height. You just need to set the desired height and then move the tool along side of the hull or something different where you want to make straight line.Tool has adjustable height between 45mm - 225mm (measur..

With its hanging ability Organizer is the ideal solution for people who, despite limited area, want to organize functional work space. It's ideal for people who deal with modelling, or other handcrafts where you need a large number of small precision tools and accessories. With wall organizer you wi..

Sprue Module has few dozen slots for sprues, decal, moulds,sand paper, styrene sheets, paper sheets etc. Thanks for this module you can save space on your desk during work on models.The Module is designed to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15 cmMain f..

The OM09 showcase module is made from machine cut (not laser cut) plywood or MDF (dense particle board) wood, and is fitted with a hinged clear acrylic cover to protect items inside from dust and damage. This module can work on its own but it is designed to connect or be stacked with other modules t..

Overturning the paint bottle, water cup or some other chemicals during the painting work can cause a lot of damage. Thanks to our SM01 Painting Tools Stand, all will become safe and stable and you will be able to focus only on your painting work. Main features: Assembled dimensions: 3.9" x 5.9" x ..

Table for painting consists of a stands measuring 40cm x 30cm x 6cm, has two rows to put paint. A dozen holes to the brushes, nail files, knives, glue, etc., two water cup holders. Extended tabletop will prevent dirt the place where you paint. The set consists of perfectly fitted parts and assembly..

Thanks to stable holders, splashing paint is practically impossible. The set includes precision fitted parts to make the stand, and assembly takes only a few minutes. S01xb 41mm Paint Stand is compatible with S01xb 41mmn Corner Paint Stand. Main Features: Assembled dimensions: 16.7" x 7" x 3.7" (42...

Thanks to stable holders splashing paint is practically impossible. The set includes perfect fitting parts to make a stand, and installation takes only a few moments.Main feature:- 54 holes for bottles with a diameter of 26mm. Dimensions: 42.5cm x 18cm x 9.5cm Paint Stand fit to following paints ..

The Base allows to put Paint Hanger on the workshop stable. There's no need to nail it to the wall, Paint Hanger with additional base can work on it's own or be a part of Workshop Modular System that gives plenty possibilities. Base consists additional room for paints and other accessories.The base ..

Thanks to stable holders, splashing paint is practically impossible. The set includes precision fitted parts to make the stand, and assembly takes only a few minutes. Main features: Assembled dimensions: 23.6" x 9" x 5.5" (60cm x 23cm x 14cm) Capacity: 60 holes for 41mm bottles Some of the paint..

With Brushes and Tools Holder you can safely store all kinds of modelling tools like brushes, drill bits, files, pincers, pipettes etc. perfect to maintain order in the workplace. Has holes of different diameter, which allows storing tools of different sizes, convenient carrying handle and there is ..

The OM14 storage hutch module is designed to store larger items (bottles, tools, etc.) that do not fit within the drawers or spaces of other modules. There are a variety of items you use in your hobby that you want to keep close but not get in the way of your work surface when they are not in use. T..

The Corner Paper Towel Module is for rolls of paper towel with maximum length up to 28,7 cm. This module serves as either an end module or as a corner module to change the arrangement of the Modular Workshop System by 90 degrees.The Module to connect with other products of Modular Workshop System...

The Corner Paints Module 36mm has thirty four holes for paints and other bottles with a diameter of 36mm. This module changes the angle by 90 degrees of Modular Workshop System.Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products o..

The Corner Paints Module 26mm has forty eight holes for paints and other bottles with a diameter of 26mm. This module changes the angle by 90 degrees of Modular Workshop System.Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products o..

Corner Paint Stand 36mm is compatible with standard Paint Stand - S1. Thanks to its construction with an angle of 90 degrees, you can maximize the use of your workplace The set consists of perfectly matched elements. Installation of Paint Stand will only takes a few moments.Main feature:- 22 holes ..

Corner Paint Stand 26mm is compatible with standard Paint Stand - S1. Thanks to its construction with an angle of 90 degrees, you can maximize the use of your workplace The set consists of perfectly matched elements. Installation of Paint Stand will only takes a few moments.Main feature:- 32 holes ..

Corner Large Paint Stand 36mm is compatible with standard Large Paint Stand - S2. Thanks to its construction with an angle of 90 degrees, you can maximize the use of your workplace The set consists of perfectly matched elements. Installation of Corner Large Paint Stand will only takes a few moments..

The Corner Drawers Module has five drawers. This module changes the angle by 90 degrees of Modular Workshop System.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 30cm x 15cmMain features:- 4 x drawers (8cm x 13cm x 6cm)- 1 x drawer (4.8cm x 13.2cm x 13cm)- 4 ..

The Corner Bottles Module has three shelves for paints, bottles or other containers of different sizes. This module changes the angle by 90 degrees of Modular Workshop System.Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products of ..

The OMS07 is a paint brush and tool storage module that can work on its own but it is designed to be stacked atop storage modules that are part of HobbyZone Modular Workshop System. Modules connect using magnets that are included and you can always change the configuration of the modules according t..

The Bottles Module has three shelves for paints, bottles or other containers of different sizes.Note! The Module can be used only in the top row of the Modular Workshop System.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15cmMain features:- 1 x shelf..

The Bottles Module has three shelves for paints, bottles or other containers of different sizes. Note! The Module can be used only in the top row of the Modular Workshop System. The Module to connect with other products of Modular Workshop System. Dimensions: 20cm x 15cm x 15 cm Main features: - 1 x..

The OM01b is a three-drawer storage module made from machine cut (not laser cut) plywood or MDF (dense particle board) wood with windows made of clear acrylic. This module can work on its own but it is designed to connect or be stacked with other modules that are part of HobbyZone Modular Workshop S..

The module has two drawers with separators. That allow you to make your own space configuration in each of drawer.The Module to connect with other products of Modular Workshop System.Dimensions: 30cm x 15cm x 15cmMain features: - 2 x drawers ( 27.4cm x 13.2cm x 5.8cm )- 10 x separators, to make you..

Airbrush Painting Clips Holder is a perfect solution for airbrush painting smaller elements of your hobby project in spray booth.Main features: - product comes with 10 elastic clip holders- holders length 17,5 cm- ideal for use in a spray booth or at the desk- desktop base with..

The OMS01b is two-drawer storage module made from machine cut (not laser cut) plywood or MDF (dense particle board) wood with windows made of clear acrylic. This module can work on its own but it is designed to connect or be stacked with other modules that are part of HobbyZone Modular Workshop Syst..

OM08a Paper Towel Module fits European standard rolls - up to 27.5cm long and up to 12cm in diameter. It has a built-in serrated flap for easy towel slips separation.Designed to be connected with, or stacked on other modules from our Modular Workshop System. The modules are connected with tiny mag..

Thanks to stable holders splashing paint is practically impossible. The set includes perfect fitting parts to make a stand, and installation takes only a few moments.Main feature:- 40 holes for bottles with a diameter of 36mm. Dimensions: 42.5 cm x 18 cm x 9.5cm Paint Stand fit to following paints ..

Thanks to stable holders splashing paint is practically impossible. The set includes perfect fitting parts to make a stand, and installation takes only a few moments. Main feature:- 111 holes for bottles with a diameter of 26mm. Dimensions: 60cm x 23cm x 14cm Large Paint Stand fit to following pai..

"Dice Tower" is the perfect solution to dices never fell off the table or not moved elements used in the game. It has three slipways so that you can be sure that the dices are well mixed before they fall to the base. Dice Tower can be use in all kinds of games where you are using dices such as: boa..

"Dice Tower" is the perfect solution to dices never fell off the table or not moved elements used in the game. It has three slipways so that you can be sure that the dices are well mixed before they fall to the base. Dice Tower can be use in all kinds of games where you are using dices such as: b..

Dimensions: 30 cm x 15 cm x 30 cmInterior for models: 26.5 cm x 22 cm x 12.5 cm Transport case is the best solution for carrying miniatures and models, the interior is covered with felt so that your models are really safe. It was designed by professional modellers, thus creating a high quality produ..

Dimensions: 45 cm x 35 cm x 25 cmInterior for models: 41.5 cm x 27 cm x 22.5 cm Transport case is the best solution for the carriage miniatures and models, the interior is covered with felt so that your models are really safe. It was designed by professional modellers, thus creating a high quality p..

The Painter Grip is a figure painting jig that features a leather-covered handle for comfort while painting miniatures, figures and small models/subassemblies. The Grip is covered with genuine leather which makes even prolonged use comfortable in the hand. The knob at the top of the Grip with the HZ..

Tournament tray is for carrying and presentation of miniatures. It has multi-level slots that allow you to use different combinations. Tournament tray has the underside handles for comfortable carrying.Tournament tray dimensions: 40.06cm x 30cm x 1.2cm The dimensions and number of slots: ..