Menu
Your Cart

RB Productions

Brand: RB Productions SKU: RB-T039
This is a glue applicator that allows for precise application of a adhesives. THis tool can be used with all types of adhesive such as cyanoacrylates (superglue), water-based glues such as PVA or contact glue.The tool is made of stainless steel so any dried-up glue can be removed by scraping with a ..
AU$11.95 12 % OFF
AU$10.51
Brand: RB Productions SKU: RB-T051
The set square is marked in inches. Small holes at every marker will make it easier to mark dimensions accurately.The square set and protractor are is made from stainless steel.These measuring tools are flexible, which allows them to conform to curved surfaces and thus make it easier to measure..
AU$13.95 10 % OFF
AU$12.50
Brand: RB Productions SKU: RB-M32004
Use these strips to mask complex curves on compound surfaces. The sheet contains 130 strips of 195 x 1 mm self adhesive material. The masking material is specially designed for use in airbrushing, will not lift paint, it is re-position able and flexible and is solvent-proof. The film is transparent ..
AU$17.95 11 % OFF
AU$15.95
Brand: RB Productions SKU: RB-T003
This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..
AU$6.95 14 % OFF
AU$5.95
Brand: RB Productions SKU: RB-TS72
1/72 Scale RulerYou can use this tool to measure scale 1/72 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..
AU$9.95 14 % OFF
AU$8.50
Brand: RB Productions SKU: RB-C32008
This is a detail set to improve the new Revell scale 1/32 P-51D-5 model kit. The set contains a pair of bomb racks with separate sway braces in photo-etched stainless steel. These represent the type of bomb rack used only on the P-51D-5. These parts add extra detail and replace the kit parts that su..
AU$27.50 9 % OFF
AU$24.95
Brand: RB Productions SKU: RB-C32009
This is a detail set to improve the new Revell scale 1/32 P-51D model kit. The set contains a set of separate undercarriage doors. These parts add extra detail and replace the kit part that is a single piece. which needs to be cut into four separate components and may suffer from sink marks...
AU$31.50 9 % OFF
AU$28.50
Brand: RB Productions SKU: RB-P24003
This is a complete set of radiators intended to improve the parts provided in the Airfix 1/24 DeHavilland Mosquito kit. No folding needed. The parts are etched in stainless steel. The radiators can be sprayed with matt varnish to provide a very realistic natural metal finish. As these are made of st..
AU$15.95 9 % OFF
AU$14.50
Brand: RB Productions SKU: RB-T008
This is an attachment for the Flip-R10 folding tools. This is an expansion tool for the Flip-R10 (RB-T001)This tool can be used to make handles, ship ladders, etc. The tool is marked with measurements that make replicating such parts very easy. The handle dimensions can range from 1mm to 20.5mm...
AU$10.95 13 % OFF
AU$9.50
Brand: RB Productions SKU: RB-T025
Fine blade for BucksawFine saw blade (24 t/cm - 58 tpi)Replacement blades for Bucksaw that is awailable here: RB-T024+T025The set contains one fret of photo-etched stainless steel containing three fine saw blades in three different widths...
AU$10.95 9 % OFF
AU$9.96
Brand: RB Productions SKU: RB-M24001
This is a set of canopy masks designed for the Airfix 1/24 Hawker Typhoon kit.Made from masking material specially-designed for use with airbrushes. The material is repositionable and flexible and will conform to complex curves. The material is grey and semi-stransparent, which (unlike paper-based o..
AU$15.95 31 % OFF
AU$10.95
Brand: RB Productions SKU: RB-D32003
This is a generic sheet of Romanian "stars" used from 1950s until the mid-80s. Suitable for all jets used by the Romanian Air Force during the Cold War period.How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth..
AU$11.95 33 % OFF
AU$7.95
1/32 De Havilland Mosquito Radiators for Tamiya kit
Out Of Stock
Brand: RB Productions SKU: RB-P32040
This is a complete set of radiators to replace the photo-etched parts provided in the Tamiya 1/32 DeHavilland Mosquito kit. No modifications needed, these parts are direct replacements for the kit parts. The parts are made of stainless steel and provide a finer and more accurate detail to represent..
AU$13.50 11 % OFF
AU$11.95
Scribe-R File (Scriber for Engraving Panel Lines into Plastic & Resin)
Out Of Stock
Brand: RB Productions SKU: RB-T037
Scribe-R FileThis is a scribing tool for engraving panel lines into plastic and resin. This scriber has extremely fine teeth that act like a file and leave a very fine groove behind. This is ideal for scribing edge panel lines such as wing edges, fuselage spines etc but it can also be used by runni..
AU$13.95 10 % OFF
AU$12.50
Scribe-R
Out Of Stock
Brand: RB Productions SKU: RB-T019
This is a scriber for plastic and resin. This scriber can be used in two ways:- the sharp "blade" end can be used in a manner similar to other scribers, either free-hand or running along a hard edge, such as a ruler. This removes a fine burr of material leaving a clean groove behind. The tip of the ..
AU$13.95 10 % OFF
AU$12.50
Pick-up Pencil / Parts Placer (for handling very small parts)
Out Of Stock
Brand: RB Productions SKU: RB-PP
This is a tool that can be used to handle parts that are too small to handle with a tweezers or parts that are hard to grab with tweezers. The tip is slightly tacky, not too sticky to make it hard to release the part when you need to, just enough to pick-up small parts without leaving any residue. W..
AU$4.95 20 % OFF
AU$3.95
Optional Extra Holder for Rivet-R Mini (Riveter)
Out Of Stock
Brand: RB Productions SKU: RB-T0101
Optional extra holder for the Rivet-R Mini rivet tool.This is an optional extra holder for the Rivet-R Mini toolThis package contains only the holder, the washer, the screw and the nut, it is intended as an add-on to the Rivet-R Mini tool and does not include the toothed wheels included in the Rivet..
AU$9.95 14 % OFF
AU$8.50
Rivet-R Mini (Riveter)
Out Of Stock
Brand: RB Productions SKU: RB-T010
RIVET-R Mini rivet tool. This is a smaller-diameter riveting tool that can get into tighter spaces.This is an attachment for a standard craft/hobby knife. Use this tool to scribe rivets on plastic, resin and even soft metals. This tool makes round imprints rather than the square imprints made by..
AU$18.50 10 % OFF
AU$16.50
Wood 2 - Airbrush Stencil
Out Of Stock
Brand: RB Productions SKU: RB-T029
Wood 2 - Airbrush StencilCreate realistic wood grain patterns with an airbrush. This allows for the creation of any kinds of wood, such as freshly varnished wood, old grey wood, stained wood or even scorched wood. Article on the use of this stencil by Entoni Seperic on Aeroscale: http://www.aeroscal..
AU$13.95 10 % OFF
AU$12.50
Set Square and Protractor - Centimetres
Out Of Stock
Brand: RB Productions SKU: RB-T050
The set square is marked in millimetres. Small holes at every marker will make it easier to mark dimensions accurately.The square set and protractor are is made from stainless steel.These measuring tools are flexible, which allows them to conform to curved surfaces and thus make it easier to me..
AU$13.95 10 % OFF
AU$12.50
Scribing Ruler in Centimetres (15cm)/Millimetres
Out Of Stock
Brand: RB Productions SKU: RB-T049
The rule is marked in centimetres (15 centimetres)/millimetres on one edge and inches (6 inches) on the other edge. Small holes at every marker will make it easier to mark dimensions accurately.The rule is made from stainless steel.This rule is flexible, which allows it to conform to curved sur..
AU$9.95 14 % OFF
AU$8.50
Scribe-R Parallel (Wide)
Out Of Stock
Brand: RB Productions SKU: RB-T022
This is a scribing tool that scribes two parallel lines in one stroke.The set includes 4 complete scribers (4 blades and 4 holders).The blades can scribe parallel lines with the following distance between lines: 1.25mm (~0.05 in) , 1.5mm (~0.06 in), 1.75mm (~0.07 in) and 2 mm.(~0.08 in). This is per..
AU$17.50 11 % OFF
AU$15.50
Scribe-R Parallel
Out Of Stock
Brand: RB Productions SKU: RB-T020
This is a scribing tool that scribes two parallel lines in one stroke.The set includes 4 complete scribers (4 blades and 4 holders).The blades can scribe parallel lines with the following distance between lines: 0.33mm (~0.01 in) , 0.5mm (~0.02 in), 0.75mm (~0.03 in) and 1mm.(0.04 in). This is perfe..
AU$17.50 11 % OFF
AU$15.50
Rapid-Cut Saw Blade
Out Of Stock
Brand: RB Productions SKU: RB-T014
Fast-cut saw blade. (12 t/cm - 30 tpi)This saw blade is a medium size blade with larger teeth recommended for rapid cuts. This saw blade can be used to cut plastic, wood and resin and is ideal for removing resin casting blocks. It cuts through resin like a hot knife through butter and if you work wi..
AU$7.95 12 % OFF
AU$6.95
Pico Saws Set
Out Of Stock
Brand: RB Productions SKU: RB-T040
This is a set of extremely fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle. The set includes 4 saw blades of the same typeThe blades are made from stainless steel.By removing the outer edge of the handle tab along the..
AU$9.95 14 % OFF
AU$8.50
Optional Extra Wheels for Rivet-R (Riveter) Mini Tool (0.65mm and 0.55mm)
Out Of Stock
Brand: RB Productions SKU: RB-T012
Optional extra wheels for the RIVET-R MINI rivet tool.This package contains only the scribing wheels, it is intended as an add-on to the Rivet-R MINI tool and does not include the holder and screw included in the Rivet-R MINI package.Use this tool to scribe rivets on plastic, resin and even soft met..
AU$9.95 14 % OFF
AU$8.50
Nano Saws set (30 t/cm - 76 tpi) for Plastic, Wood and Resin parts
Out Of Stock
Brand: RB Productions SKU: RB-T038
This is a set of very fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals. * The set does not include the knife handle. The set includes 6 saw blades: - 2 Curved saws - these can be run along a ruler like a "contour saw" (pictured below). Two sizes are included ..
AU$14.95 9 % OFF
AU$13.50
Micro Saws Set (6pcs)
Out Of Stock
Brand: RB Productions SKU: RB-T023
Micro-Saw set (22 t/cm - 56 tpi)This is a set of fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle.The set includes 6 saw blades:* 2 Curved saws - these can be run along a ruler like a "contour saw" (see the 3rd photo ..
AU$14.95 9 % OFF
AU$13.50
Masking Strips - Curved
Out Of Stock
Brand: RB Productions SKU: RB-M32006
Use these strips to mask complex curves on compound-curve surfaces. This is ideal for masking radar domes, drop tanks, weapon stripes and even spirals on propeller spinners. The masking material is specially designed for use in airbrushing, will not lift paint, it is re-position able and flexible an..
AU$13.95 10 % OFF
AU$12.50
Honeycomb Radiator Mesh - 30/10 (for 1/32 Aircraft)
Out Of Stock
Brand: RB Productions SKU: RB-T034
Honeycomb Radiator Mesh (30/10)This is a generic honeycomb radiator mesh suitable for scale 1/32 aircraft. It can be cut to size and used to replace plastic kit radiator parts that are often inaccurate or overscale. Unlike generic woven meshes, this will not unravel when cut.This radiator mesh can b..
AU$13.95 10 % OFF
AU$12.50
Flip-R5 - Folding Tool for Photo-etched parts
Out Of Stock
Brand: RB Productions SKU: RB-T002
This is a bending tool for photoetched parts. This can bend any commercially available photoetched parts up to a length of 5 cm (approx 2 in). Suitable for all scales and all types of modeling.This tool works on the same principle as the hinged bending brakes that can be found in many metal workshop..
AU$30.50 9 % OFF
AU$27.50
Fine Saw Blade
Out Of Stock
Brand: RB Productions SKU: RB-T016
Fine saw blade (24 t/cm - 58 tpi)This is a fine saw blade and is recommended for most model-related cuts. This blade can be used to cut plastic, wood and resin.This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "..
AU$7.95 12 % OFF
AU$6.95
Cutting Gauge
Out Of Stock
Brand: RB Productions SKU: RB-T041
This is a tool that can be used to cut many long items (such as rods or bars) to the same length. Ideal for cutting stanchions, masts, antennas, duckboards, fence posts, etc. The pre-set dimensions range from 0.5 mm to 30 mm in 0.5 mm increments. The cutting gauge is made of stainless steel...
AU$11.95 12 % OFF
AU$10.51
Contour Saw Set
Out Of Stock
Brand: RB Productions SKU: RB-T018
Contour saw (16 t/cm - 40 tpi)This is a set of medium-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle.The set includes 5 saw blades:* 2 Curved saws - these can be run along a ruler as shown in the second photo above. Two ..
AU$18.50 10 % OFF
AU$16.50
BuckSaw with Fine Saw Blade (24 t/cm - 58 tpi)
Out Of Stock
Brand: RB Productions SKU: RB-T024+T025
Bucksaw & Fine bladeFine saw blade (24 t/cm - 58 tpi)This saw consists of a saw blade that is tensioned and held from both ends, leaving the blade clear to cut through the material.The set contains two frets of photo-etched stainless steel, one containing the multi-part frame and one containing thre..
AU$25.50 10 % OFF
AU$22.95
Attachment for Flip-R5 - for Handles
Out Of Stock
Brand: RB Productions SKU: RB-T005
This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..
AU$6.95 14 % OFF
AU$5.95
1/48 Scale Ruler for Modelling
Out Of Stock
Brand: RB Productions SKU: RB-TS48
1/48 Scale RulerYou can use this tool to measure scale 1/48 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..
AU$9.95 14 % OFF
AU$8.50
1/350 Multimedia kit - L.E. Roisin (P51) Irish Naval Service OPV
Out Of Stock
Brand: RB Productions SKU: RB-K13502
This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.Scale 1/350 Multimedia model kit of the L.E. Roisin (P51) Irish Naval Service OPV The set includes:- Resin parts - Photo-etched parts in bass and stainles..
AU$140.50 9 % OFF
AU$127.50
1/350 L.E. Eithne (P31) Irish Naval Service OPV
Out Of Stock
Brand: RB Productions SKU: RB-K13504
Scale 1/350 model kit of the LE Eithne, P31, Irish Naval Service OPV - Resin parts - Photo-etched parts in stainless steel - Turned brass parts - Decals..
AU$155.95 9 % OFF
AU$141.50
1/350 Emer-Class Irish Naval Service OPV - P21 / P22 / P23
Out Of Stock
Brand: RB Productions SKU: RB-K13503
Scale 1/350 model kit of the Emer-Class Irish Naval Service OPV - Resin parts - Photo-etched parts in stainless steel - Turned brass parts - Decals for P21 L.E. Emer, P22 L.E. Aoife, P.23 L.E. Aisling and P62 of the Maltese Navy...
AU$130.50 9 % OFF
AU$118.50
1/35 Scale Ruler for Modelling
Out Of Stock
Brand: RB Productions SKU: RB-TS35
1/35 Scale RulerYou can use this tool to measure scale 1/35 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..
AU$11.95 12 % OFF
AU$10.51
1/32 WWII Imperial Japanese Army Ki- Seat Belt / Harness set
Out Of Stock
Brand: RB Productions SKU: RB-P32030
This is the harness used on Imperial Japanese Army aircraft in World War 2. Suitable for all Imperial Japanese Army aircraft with the "Ki" prefix used during WW2. No painting needed (except for painting the red quick-release lever). Simply remove the pre-cut straps from the backing paper, glue the ..
AU$10.95 13 % OFF
AU$9.50
1/32 Vought F4U Corsair Oil Coolers
Out Of Stock
Brand: RB Productions SKU: RB-P32035
This is a complete set of radiators to replace the photo-etched parts provided in the Tamiya 1/32 F4U Corsair kit. The set contains the oil coolers. No modifications needed, these parts are direct replacements for the kit parts.The oil cooler parts are made of stainless steel and provide a finer an..
AU$10.95 13 % OFF
AU$9.50
1/32 USAF/USN Seatbelts - White (Pre-cut Belts w/Photo-Etched Buckles)
Out Of Stock
Brand: RB Productions SKU: RB-P320082
Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet of photo etched parts with the buckles and cla..
AU$11.95 12 % OFF
AU$10.51
1/32 USAF/USN Seatbelts - Green (Pre-cut Belts w/Photo-Etched Buckles)
Out Of Stock
Brand: RB Productions SKU: RB-P320081
Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet of photo etched parts with the buckles and cla..
AU$11.95 12 % OFF
AU$10.51
1/32 USAF/USN Seatbelts - Beige (Pre-cut Belts w/Photo-Etched Buckles)
Out Of Stock
Brand: RB Productions SKU: RB-P320083
- Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.- The straps can be set to whatever length you need, just as on the real thing.- The set in..
AU$11.95 12 % OFF
AU$10.51
1/32 Sutton QK Harness
Out Of Stock
Brand: RB Productions SKU: RB-P32016
Scale 1/32. This is the standard seat harness used on all British-made / RAF aircraft until the end of WW2 and even after. Suitable for all wartime Spitfires/Seafires, Hurricanes, Mosquitoes, Typhoons, Tempests, etc.No painting needed, just remove the pre-cut belts from the backing paper, glue the d..
AU$11.95 12 % OFF
AU$10.51
1/32 Sutton A Seat Harness
Out Of Stock
Brand: RB Productions SKU: RB-P32017
Scale 1/32. "Sutton A" Seat Harness. Designed by Oliver Sutton in 1917, this was the "Jack-of-all-trades" harness used on all British-made / RAF aircraft from 1918 until the beginning of WW2 (and even after). Suitable for all interwar British aircraft, especially biplanes. These harnesses saw acti..
AU$11.95 12 % OFF
AU$10.51
Showing 1 to 48 of 134 (3 Pages)