Scenics & Diorama

Set contains elements created with resin 3D printing technology.Colour of delivered product may vary depending on the production batch but it has no influence on product's properties.Product for profesional use only...

Set contains elements created with resin 3D printing technology.Colour of delivered product may vary depending on the production batch but it has no influence on product's properties.Product for profesional use only...

Set contains elements created with resin 3D printing technology.Colour of delivered product may vary depending on the production batch but it has no influence on product's properties.Product for profesional use only...

Set contains elements created with resin 3D printing technology.Colour of delivered product may vary depending on the production batch but it has no influence on product's properties.Product for profesional use only...

The set contains 4x photo-etched sheets and 0.3mm x 10cm x 1 steel wire.NOTE:- This set does NOT include PE16018 which can be separately purchased.- The set does NOT include armour kit...

..

The set contains 2x photo-etched sheets...

The set contains 2x photo-etched sheets and 0.5mmx10cmx1 copper wire.NOTE: This set does NOT include TE040 which can be separately purchased...

..

3D printing parts...

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

3D Printed Food Cans4 Pads of what you see in PictureKeep out of strong light until you remove from the pad and apply primer. Exposure to light may continue to cure items, causing them to warp or become brittle. The pads may curl slightly (even when left in the dark) due to the stresses in the res..

..

..

..

..

A set of three buckets in 1:24 scale. The set includes : 1x 5L bucket, 1x 10L bucket, 1x 12L bucket, bucket bottoms and 10cm of 0.2mm black wire. Each bucket has two mounting holes for the wire. Elements made with 3D technology. The bucket bottoms are placed on supports, require trimming and finishi..

..

..

..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..