Scenics & Diorama

Key Features:- Printed in full colour on a half A4 sheet (14.5x21cm)- Contains 16 different carpets and 1 long stair carpet- Printed on "fluffy" paper containg real fibres for a very realistic look and feel- Carpets can be realistically used in scale 1/16th - 1/72nd scales- For a review on these car..

Note: kit comes unassembled and unpaintedKey Features:-Set contains 12 different paintings printed on real, very fine canvas for a very realistic look and 11 resin frames-Instructions included-Scale 1/48 up to 75mm; some paintings could even be used in 1/72-Comes packed in a handy, hard plastic box..

This is a set of nicely detailed wicker baskets, 5 different styles, 8 in total. These baskets will look great on a military vehicles or anywhere in your diorama or vignette.Set contains 8 wicker baskets in 5 different styles, all casted in resin.-Scale 1/35 - 54mm-Painting by Olav Smeets-Set comes ..

They have been printed on special semi gloss paper that give the tiles a very slight texture which creates a super realistic look. Scale 1/35...

Contains 3 highly detailed resin cabinets. Cabinets measure 4.6 x 6.7 x 1.6cm - 2.4 x 6.3 x 1.3cm - 4.7 x 4.3 x 1.7cm. Scale 1/35 - 54mm. - Note: All parts in the kit come unpainted. The photos only show a painted example...

..

..

Total 11 Parts..

Total 9 parts..

..

..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

This product is a high-precision 3D print kit, with very fine layer texture, which can be painted without polishing. The kit contains two model mini-bars, two ice packs and one fresh box. Mini-bar can match with model soda cans (Liang-0411/0412) ...

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Note: This product is a high-precision 3D-print resin kit, some surface need to be polished with putty. Extra decals can be used with MENG Drink Bottles (SPS-002)...

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

Kit contains:- 1 wooden chair with straw seat- 1 54lt demijohn- 1 20lt demijohn- 1 iron bucket- 1 iron basin- 1 5lt wooden barrel- 1 large wooden box- 1 little wooden box- 6 bottles of wine (3 with the cork and 3 without the cork)- 20 beer bottles- 1 funnelThese objects were ..

Kit contains:- 1 wooden chair- 1 empty wicker basket- 1 wooden bucket- 1 sack of potatoes- 1 fruit wicker basket- 1 large milk container- 1 small milk container- 1 wicker basket with bread- 1 oil lamp- 1 funnel- 1 decanter- 1 herbicide sprayer pumpThese objects were entirel..

Contents: 34 resin parts + decal sheet + photo-etched sheet + wire..

Generic set dedicated to workshop tools; Finally you can say goodbye to the use of the photosecrasis for buckets which are already ready in 3D with the holes to insert the handle with a 0.20 mm wire. Furthermore a splendid wooden box for tools with sunken drawer and fine bills.The kit consists of ..