Model Planes

..

This set contains a new, accurate radome, a replacement tailcone with towed decoy fairings, a corrected tailplane fairing, Defensive Avionics System fairing and antennas, and separate flow vanes. The Monogram kit represents a very early production B-1B and the nose shape is wrong. This set will allo..

..

Contains a new, accurate and highly detailed instrument panel (with instrument face decals),coaming, gunsight with clear cast gunsight glass, and all necessary blade antennas to convert a 1/32 Trumpeter A-4E/F to the RNZAF Kahu Skyhawk. All parts except the clear gunsight glass are 3D printed, and i..

This is a set of aft fuselage half parts that correct the shape error on the engine shoulders of the Zoukei Mura short nose Phantoms. in addition to the re-shaped geometry, some surface detail has been improved. Please note that this is not a drop-fit replacement set. Cutting of the fuselage is requ..

This is a full conversion set to build an NF-104A aerospace/astronaut trainer aircraft from the Kinetic F-104G kit. The set comes with all parts needed, some injection moulded plastic, some 3D printed, plus a turned brass pitot boom and a full set of decals by Caracal (printed by Cartograf)...

This is a replacement resin fin tip for the HobbyBoss Intruder family. The HB fin tip has the wrong shape and once you have noticed the error you can't ignore it any longer...the surface detail is slightly corrected and enhanced as well. The required cut on the kit is fairly simple as it's along a p..

This is a set of corrected engine nacelles with intakes, exhausts and pylons for the Trumpeter A-3 Skywarrior kits in 1:48. Suitable for all variants. This set also includes parts that enable the modeller to build the kit with dropped flaps. Please note that the first print run of the instructions m..

AH-1G Cobra air intake correction set (Special hobby)correction set for Special Hobby kit..

P 40 Klimov engine conversionconversion set for Hasegawa P40E kit..

ContentGLARE SHIELD (PILOT)EJECTION SEAT GRU-7AINSTRUMENT PANEL (PILOT)INSTRUMENT PANEL (RIO)AN/AXX-1 TCSAN/ALQ-126 LOW BAND ANTENNAAN/ALQ-126 HIGH BAND ANTENNAWHEEL HUB & SAGGED TIREFeaturesSparrowHawk HUDCanopy Jettison Handle (Pilot)Canopy Jettison Handle (RIO)..

This early release of the plastic injection moulded kit is a conversion for the Fujimi F-86F "Mig Killer". It includes the fuselage and nose ring plastic parts, one Falcon crystal clear canopy and decals including one Indonesian Air Force.#NOTE: The set does NOT include a model kit...

Contains a new radiator front casting with the concentric ring type intake shroud that is missing from the new Eduard Tempest V kit. Tempests not fitted with dust filters would always be fitted with the shrouding to prevent hot radiator air from entering the carburettor intake. An alternate dust fil..

This set contains a new detailed de Havilland 4 blade spinner with smaller & accurately shaped blade openings to replace the kit spinner in the Series I and Series II kits. new tool Eduard Tempest V. Can be modified for use on other other Tempest and Typhoon kits...

This set is designed to correct the nose, radiator, prop and spinner on the otherwise stunning Special Hobby Tempest V. The problem with the nose is that the spinner baseplate diameter is too big by about 2 inches. This throws out the taper of the forward cowling. The radiator opening is also too bi..

..

conversion set enabling the modeller to make the reconnaissance versions based on the P-38F/G Lightning airframe consists of resin parts, clear resin parts and decal sheet decal offer 1x USAAF a 1x RAAF option..

Corrected tail surfaces (stabilisers, elevators and rudder) for the Kitty Hawk FJ-2 Fury (and early FJ-3). The FJ-2 kit only contains the ribbed elevators/rudder, which is correct for an FJ-3 and very late FJ-2's after transfer to the Reserves. FJ-2's in service (as well as early FJ-3's) had smooth-..

This is a backdate set for Kinetic's F-104A/C kit to build an early F-104A with the downward firing C-1 ejection seat. The set includes parts from the F-104A Late set (lower fuselage insert, alternate hot air exhaust panel, L-brackets) plus the C-1 seat, ejection rails, rear cockpit bulkhead, forwar..

..

..

..

..

AV-8B Harrier II+ Correct Air-scoop set for Trumpeter 1/32Total 4 resin partsA5 color printing manual included..