Hobby & Model Paints

..

..

..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

Super thin epoxy for wing skinning, laminating and moulding.Use with lightweight glass cloth to add strength and toughness to models...

Converts Aerokote Gloss to satin or matt finish. A simple matting agent that blends readily with Aerokote gloss to give it a satin or matt finish. Just measure & add ??Make it Matt?? to Aerokote Gloss in the quantities as tabulated below and then add standard Aerokote catalyst to the mix in ratio 1..

..

..

..

..

..

..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

Set your water in motion by using Surface Waters to model splashes, waves and waterfalls. Use White Water Highlight to intensify movement or add foam and froth. https://youtu.be/Vusd8eg1qqc How To Use White Water Highlight Video Add White Water Highlight to intensify water crests, rapids, and waterf..

For more info about Zero paints, please read Zero Paints Colour Description.pdfSemi-Gloss (Satin) 2 Pack Clearcoat for use on various models requiring a semi-gloss protective finish.Contents :100ml Semi-Gloss clear coat (Medium Solid) also known as Urethane or Polyurethane 25ml Hardener 60ml T..

For more info about Zero paints, please read Zero Paints Colour Description.pdfLeave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each..

For more info about Zero paints, please readApplication Notes: Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi, 3 - 4 medium cross coats are recommended. Air drying at 20 °C Dust-free: 5 - 10 mins, Tack-free: 20 - 30 mins.Please Not..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

..

SubTerrain Road System Video Top Coat Asphalt is a non-toxic, water-soluble compound used to simulate the colour of blacktop road surfaces. Brush-on application.One bottle will cover approximately 9 - 12 ft2 (83.6 - 111 dm2)..

Usage:A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, high-sheen gloss finish.Substrate:Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Sati..