Hobby & Model Paints

..

Retarder Medium to delay drying time of Model Colour, mix a few drops with the colour, or dip brush into retarder on the palette. Colours will not change their consistency. Useful for "wet on wet" techniques and reducing skin formation on the palette...

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

Very soft thinner special for modalism in washes, filters, effects??..

Replenishing Agent for high viscosity or dried Mr.COLOR paint. Includes a coating resin, not included in Mr.COLOR thinner, that restores the original performance of the paint...

The soap will take care of your paintbrushes and hands in a very delicate way. Unscented and natural. Made in a traditional way with potassium soap of vegetable oils without perfume, dye, thickener or bleach. (100 gr)..

..

..

Softens and removes paint from plastic in minutes.Stays where it is applied.May be used on plastic, resin, metals etc.Non-corrosive & Non-flammable.A fast acting, spreadable, & controllable paint stripper that will soften and remove paints and primers, typically 5-15mins according to paint type...

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

Super thin epoxy for wing skinning, laminating and moulding.Use with lightweight glass cloth to add strength and toughness to models...

Converts Aerokote Gloss to satin or matt finish. A simple matting agent that blends readily with Aerokote gloss to give it a satin or matt finish. Just measure & add ??Make it Matt?? to Aerokote Gloss in the quantities as tabulated below and then add standard Aerokote catalyst to the mix in ratio 1..

Vallejo's Surface Primers are water based Acrylic-Polyurethane primers. They are perfect for surfaces like plastics, brass, resin, metal, etc., and can be used on model trains, airplanes, armor, ships, and figures. They provide a great surface for the painting and weathering / finishing stages.P..

..

..

..

..

..

..

..

UsageA solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, low-sheen matt finish.SubstrateCommon plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satin co..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

Set your water in motion by using Surface Waters to model splashes, waves and waterfalls. Use White Water Highlight to intensify movement or add foam and froth. https://youtu.be/Vusd8eg1qqc How To Use White Water Highlight Video Add White Water Highlight to intensify water crests, rapids, and waterf..