Flying Leathernecks

Vinyl Detail..

3D ResinThis detailed TSS is a direct replacement for the kit parts. Simply detail paint and install.Use sprue cutters to remove turret from supports and lightly sand support nibs smooth. It may be necessary to remove the locating tabs from kit parts C59 and C60..

3D ResinThe FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR.Designed for the Academy kit..

3D ResinThis set includes four (4) ADU-299 Adapters. These are used to allow aircraft to carry the LAU-7 missile launcher on stations not normally designed to carry that launcher...

Set of four (4) 3D printed launchersIn January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6.Over the course of the next several years, numerous AAC's changed the designation of the launcher to B/A, A-7, B/A-1, as well as a few others. How..

Some minor clean up of the forward end of the bomb will be required to remove the print support nibs. A few swipes with a file and sanding sticks does the trick.Set contains two Fire Bombs..

3D ResinThis set includes four (4) bombs ready to paint and install on your model. Bombs come as shown in photo, with print supports removed. Light sanding of the aft edge of the fins required to remove print support nibs.CAD by Craig Sargent..

Set of four (4) 3D printed launchersIn September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4.In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5.The LAU-7/A-5 was the launcher used when two VF-41 F-14..

This set includes two empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft.Pods are 3D printed and come ready to paint and attach to your m..

Designed by Petr Haupt, this set includes two (2) LAU-33 Pods, four (4) Mk-71 Rocket Motors, four (4) Mk32 Mod 0 anti tank / anti personnel warheads with Mk188 Impact Fuzes and four (4) Mk32 Mod 0 warheads with Mk93 proximity fuzes..

3D ResinThis set includes two (2) LAU-10 rocket pods, eight (8) Mk-71 Mod 1 Rocket Motors, eight (8) Mk-32 Mod 0 AT/AP Warheads with Mk-93 Mod 0 Fuze and eight (8) Mk-32 Mod 0 AT/AP Warheads with Mk-188 Impact FuzesLAU-10 CAD by Matt FarrowRockets and warhead CAD by Dave Roof..

3D ResinThis set includes four (4) GBU-12 laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fins in the guidance s..

Vinyl Mask..

This set includes two main wheels and two nose wheels for the Academy F/A-18 Hornet.CAD by Richard VanZandt..

All NEW design HUD assembly for use with the Academy kit parts. Complete unit is 3D printed and comes ready to install after a small modification to the kit parts.Includes die cut 'glass' in .005 clear styrene..

Vinyl Detail..

Vinyl Mask..

Vinyl Mask..

Vinyl Mask..

Vinyl Mask..

Vinyl Mask..

Vinyl Mask..

This set includes eight (8) corrected Pitot Tubes for use on the F/A-18A thru D, F-14A/B/D, A-7D/E and F-8E.Directly replaces kit parts in the Academy, Tamiya and Trumpeter kitsCAD by Dave Roof..

This item is 3D printed and comes ready to install. 'Glass' cut in .005 clear styrene also included...