All Products

This mask has specifically been designed for use with the Tamiya 1/48 Scale Kit no: 61119. This set provides the insignia masks for FZ-L No 65 Squadron 1939.This set includes only the serial numbers, code letters and other markings. The camouflage pattern is not included and can be bought separate..

The Mk Vc was saw service in the South East Asia and India campaigns with the RAAF and RNAF, Roundel sizes and tail fin sizes varied so it please check your references.This set includes only the camouflage pattern. Serial numbers, code letters and other markings are not included...

When the Eighth Air Force began arriving in England in 1942, it was initially planned that what fighter units would be assigned to it would utilise the Lockheed P-38 Lightning, while the Bell P-39 Aircobra would provide escort for the medium bombers that were coming. They arrived before their aircra..

This mask has been designed with Eduard's IXe and VELVETA series in mind, specifically "WHITE 25 ". This aircraft reached Israel in the second batch of aircraft bought from Czechoslovakia in 1949. The mask should work well with most kits. The camouflage pattern is representative of post war IXe's...

The F24 was the final Spitfire variant and was similar to the F22 except that it had an increased fuel capacity over its predecessors, with two fuel tanks of 33 gallons each (150 l). All had the larger "Spiteful" tail units. The F24 achieved a maximum speed of 454 mph (731 km/h) and could reach an a..

The Black Hawk is the Armys front-line utility helicopter used for air assault, air cavalry and aeromedicals evacuation units.** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold sepa..

The SEPECAT Jaguar is an Anglo-French supersonic jet attack aircraft originally used by the British Royal Air Force and the French Air Force in the close air support and nuclear strike roles. Originally conceived in the 1960s as a jet trainer with a light ground attack capability, the requirement fo..

The SEPECAT Jaguar is an Anglo-French supersonic jet attack aircraft originally used by the British Royal Air Force and the French Air Force in the close air support and nuclear strike roles. Originally conceived in the 1960s as a jet trainer with a light ground attack capability, the requirement fo..

Seafire Mk XV, which was powered by a Griffon VI - single-stage supercharger Designed in response to Specification N.4/43 this appeared to be a naval Spitfire F MkXII; in reality the Mk XV was an amalgamation of a strengthened Seafire Ill airframe and wings with the wing fuel tanks, retractable ta..

The Bristol Beaufort was a British twin-engined torpedo bomber. The Australia Beaufort. These are often known collectively as the DAP Beaufort. The Royal Australian Air Force in the South West Pacific theatre, where they were used until the end of the war.Although it was designed as a torpedo-bomb..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

The Lockheed Martin F-35 Lightning II is a family of single-seat, single-engine, all-weather, stealth, fifth-generation, multi-role combat aircraft designed for ground-attack and air-superiority missions. The F-35's radar-absorbent materials (RAM) are designed to be more durable and require less mai..

The Lockheed Martin F-35 Lightning II is a family of single-seat, single-engine, all-weather, stealth, fifth-generation, multi-role combat aircraft designed for ground-attack and air-superiority missions. The F-35's radar-absorbent materials (RAM) are designed to be more durable and require less mai..

The single-seat Hunter entered service as a manoeuvrable fighter aircraft and later operated in fighter-bomber and reconnaissance roles during numerous conflicts. The Hunter kept secondary roles with the Royal Air Force (RAF) and Royal Navy (RN) until the early 1990's.The Hunter was widely exporte..

We have tried faithfully to represent the scheme used for the RAF Phantom.This set includes only the camoflauge pattern. Serial numbers, code letters and other markings are not included.Any products (models, paints etc) shown in photos are not included...

The Bristol Beaufort was a British twin-engined torpedo bomber. The Australia Beaufort. These are often known collectively as the DAP Beaufort. The Royal Australian Air Force in the South West Pacific theatre, where they were used until the end of the war.Although it was designed as a torpedo-bomb..

The Lockhead C-130 Hercules is an American four-engine turboprop military transport aircraft designed and built originally by Lockhead. It is capable of using unprepared runways for take-offs and landings. The C-130 is used in multiple roles including a troop, medevac and cargo transport aircraft, s..

a set of plastic parts for the assembly of one model of the aircraft consists of six sprues, one of which is clear coloured assembly guide marking are provided for two painting schemes: Polish Air Force 2023 Ukrainian Air Force 2022..

** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

The F-4 was used extensively during the Vietnam War. It served as the principal air superiority fighter for the U.S. Air Force.We have tried to faithfully represent the camouflage pattern as the aircraft would have been painted in the factory.This set includes only the camouflage pattern.Any p..

Insignia markings for the RAF Mosquito...

Suitable for all kit manufacturers.This set includes only the camouflage pattern. Serial numbers, code letters and other markings are not included.Any products (models, paints etc) shown in photos are not included...

Stalactites, stalagmites and icicles made of high quality transparent resin. These accessories can be used for winter themed figures, frozen cave dioramas, to name just a few ideas!The pieces measure between 3 to 17 mm, which makes them suitable for all scales.These ice stalactites or icicles ca..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..