All Products
Future Release
Brand: H3 Models
SKU: H3-HS24017
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24055
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24019
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Out Of Stock
Brand: ICM
SKU: ICM 24023
This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.The passenger car of increased comfort with powerful engine, Admiral was the top of Opel pre-war model range. Since February 1938 till October 1939 only..
US$35.75
Out Of Stock
Brand: ICM
SKU: ICM 24021
This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...
US$33.06
Future Release
Brand: H3 Models
SKU: H3-HS24068
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24069
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24052
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24054
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: SOL Resin Factory
SKU: SOL-MM903
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24056
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: SOL Resin Factory
SKU: SOL-MM904
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..
US$0.00
Future Release
Brand: SOL Resin Factory
SKU: SOL-MM906
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..
US$0.00
Future Release
Brand: SOL Resin Factory
SKU: SOL-MM905
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..
US$0.00
Future Release
Brand: SOL Resin Factory
SKU: SOL-MM907
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24084
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24085
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24090
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24089
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24088
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24087
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24086
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24063
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00
Future Release
Brand: H3 Models
SKU: H3-HS24058
Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in removing 3D parts is useful but not e..
US$0.00