All Products
Out Of Stock
Brand: Noys Miniatures
SKU: NM3204
A single 1/32 sheet (approx. dimensions: Length: 59.3 cm; Width: 40 cm)...
US$33.65
Future Release
Brand: Archer Transfers
SKU: AR88142
RESIN ON CLEAR DECAL FILM
Sheet of aircraft rivets .014" (.34 mm) in diameter in three different spacings to match the spacings on AR88143 and AR88144.
Includes a transparent guide to match sheet layout to aid in selecting the appropriate diameter for your model. Comes with instructions.SCALE NOTE..
US$0.00
Future Release
Out Of Stock
Out Of Stock
Brand: Wolfpack Design
SKU: WP32009
Features: - AGM-154 JSOW set for 1/32 F/A-18, F-16- Total 16 resin parts- A5 color printing manual included..
US$17.11
Discontinued
Brand: Profi Modeller
SKU: PROF-32161P
32161 L-39V tow tug - converse set 1:32 HpH models
- decals
- resin parts
- photoetched partsIn 1970 , when an intensive examination of the L -39 defined the Department of Defense requirements for development of the aircraft for target towing .The first version of the towing aircraft L - 39..
US$0.00
Discontinued
Out Of Stock
Brand: Master Models
SKU: AM-32-077
The set includes turned aluminum Pitot Tubes.It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the metal barrel using Cyanoacrylate adhesives.Mounting Position:- Replace plas..
US$2.49
Discontinued
Discontinued
Future Release
Brand: Eduard
SKU: ED 3DL32034
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$0.00
Future Release
Future Release
Brand: Eduard
SKU: ED JX337
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Future Release
Future Release
Brand: Eduard
SKU: ED 3DL32033
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$0.00
Future Release
Future Release
Brand: Eduard
SKU: ED JX336
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-VM32075
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Out Of Stock
Future Release
Brand: DEAD Design
SKU: DEA-VM32073
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-VM32074
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: Art Scale Kit
SKU: ASK200-A32011
Seat (early) for A-20J/K Havoc. Printed resin part, textil seat belts (laser cut + printing) and photoetched buckles, for 1/32 A-20J/K Havoc by Hong Kong Model. The seat is also suitable for other US airplanes of this era / kits of other manufacturers...
US$0.00
Future Release
Brand: Red Fox Studio
SKU: RFSQS-32144
Red Fox Studio manufactures 3D acrylic resin instrument panels and detail parts for aircraft cockpits in several scales.
<br /><br />
With a wide-ranging catalogue featuring references for the most popular aircraft, as well as for the most popular scale models, these upgrade details easi..
US$0.00