All Products
Out Of Stock
Future Release
Out Of Stock
Brand: Master Models
SKU: AM-32-067
The set includes turned brass static dischargers.Set can be used in many Sukhoi jets kits in 1:32 scale.It is very simple to use in Your model, cut off the original plastic barrel and drill a hole in the remaining plastic parts. Insert the metal barrel using Cyanoacrylate adhesives...
US$2.93
Out Of Stock
Brand: MPC
SKU: MPC952
This improved edition of the Darth Vader Tie Fighter kit features retooled top & bottom hatches, a detailed cockpit, clear blaster parts, and an ALL-NEW Darth Vader pilot figure. The kit also includes simple instructions and beautifully restored vintage packaging.Skill level 2, paint & glue required..
US$0.00
Future Release
Brand: Polar Lights
SKU: POL909
This is a plastic model kit, which comes unassembled and unpainted...
US$0.00
Future Release
Brand: Copper State
SKU: CSM F32-053
RNAS Standinig pilot. Resin. Most suitable for dioramas. By Andrey Blyoskin..
US$0.00
Future Release
Brand: Archer Transfers
SKU: AR88196
RESIN ON CLEAR DECAL FILM
Similar to our double row rivets but staggered in a zig-zag pattern. The spacing on this sheet corresponds to the spacing on sheet AR88143. Comes with instructions...
US$0.00
Out Of Stock
Future Release
Brand: Iconicair
SKU: IA001
Cowlings and spinner
improvement parts for the Revell/Matchbox Spitfire Mk22/24..
US$0.00
Out Of Stock
Brand: Scale Aircraft Conversion
SKU: SAC-32051
**NOTE:Slight warpage might occurred to the malleable nature of white metal and is easily straightened. A brief but succinct tutorial for working with white metal can be found on the homepage the their official website: www.scaleaircraftconversions.com..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-UC32025
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-NM32100
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-NM32098
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-NM32099
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-SM32031
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Out Of Stock
Brand: TopNotch
SKU: TNM32-M162
This Spitfire was delivered Operation Velveta I in September 1948. It served in the Cheyl Ha'Avir with the 101st Tajeset and later with the 105th. It appearers in 1953 scheme. It was flown by by a 107th Tajeset pilots.version 2This set includes only the camouflage pattern. Serial numbers, code l..
US$15.07
Out Of Stock
Out Of Stock
Out Of Stock
Future Release
Brand: DEAD Design
SKU: DEA-UC32023
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Future Release
Brand: DEAD Design
SKU: DEA-SM32029
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$0.00
Out Of Stock
Brand: Scale Aircraft Conversion
SKU: SAC-32062
The accuracy of the main gear has been improved and the tail wheel comes as a separate part from the tail wheel gear.**NOTE:Slight warpage might occurred to the malleable nature of white metal and is easily straightened. A brief but succinct tutorial for working with white metal can be found on the ..
US$0.00
Out Of Stock
Brand: ICM
SKU: ICM D3203
This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...
US$0.00
Out Of Stock
Brand: Planet Models
SKU: PLT236
This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.Full resin kit of a Soviet first generation jet aircraft. Except of the VVS Air Force it served with other Socialist Camps AFs, such as Czechoslovakia, Po..
US$58.21