All Products

Stabilator for all types of F-4 Phantom that use the slotted stab. For both the Hasegawa and Academy kits. Includes separate PE pivot cover plates and stiffener "fishplates" (for Air Force variants). The stabs can be used as a drop fit replacement for the kit parts or, with some work on the kit plas..

F-4 Phantom outer pylons, Air Force type, 1:48, designed for the Zoukei Mura line of kits. The pylons have the correct outboard angle built in and come with separate sway brace pins so stores can be mounted at correct angles, either canted in line with the pylon or perpendicular to the ground...

Decals for F-15E that took part in the operation Odyssey Dawn, Libya 2011. Features two aircraft, 97-0219 and 01-2003. Markings include full crew names that were re-applied after the operation, full contemporary stencils and landing gear placards. The set comes with paint masks for insignia, ID mark..

..

The set contains 3D decals, plus steel photo-etched details. Easy to apply.3D decals 1. Soak the decal in the warm water for couple of seconds and after its separation from the backing paper position it on the model. 2. To increase decal's adherence use the white glue, Mr. Mark Setter or apply to th..

Zoom sets are simplified version of Eduard standard sets and only include some interior parts such as seat belts, instrument panel and other important parts for detailing the exterior. Zoom details sets are usually coloured and are part of their respective standard set...

..

Masking sheet - die-cut adhesive shapes...

This is a set of two SR-1 seats for the new Revell 1:48 SR-71. The seats are very accurate in dimension and detail and have been fully CAD designed. The two seats in the set are not identical in the draping/positioning of the belts and hoses. One modification to a detail on the seat was made to adap..

..

Made by direct 3D printing. Easy to assemble, replaces plastic parts...

This is a backdate set for Kinetic's F-104A/C kit to build an early F-104A with the downward firing C-1 ejection seat. The set includes parts from the F-104A Late set (lower fuselage insert, alternate hot air exhaust panel, L-brackets) plus the C-1 seat, ejection rails, rear cockpit bulkhead, forwar..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

This set contains: 2 canopy masks(outside & inside) + 2 insignia masksHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, th..

This set contains: 2 canopy masks(outside & inside) + 3 insignia masksHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, th..

#NOTE: The set does NOT include a model kit...

Mini Mask series - containing masks for painting aircraft cabinsType : Paint MaskHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on th..

Type : Paint MaskMini Mask series - containing masks for painting aircraft cabinsHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on th..

Paint Mask: Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model b..

..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

Brassin pre-painted dashboards and STEEL seatbelts for TBF-1C in 1/48 scale. Easy to assemble, replaces plastic parts.Recommended kit: Academy Set contains: resin: 5 parts 3D print: 1 part decals: no photo-etched details: pre-painted painting mask: no..

..

Brassin set - F-14A wheels in 48th scale for Tamiya kit.The set contains main and front landing gear wheels and paint mask.The set contains:- resin: 8 parts- decals: no- photo-etched details: no- paint mask: yes..