All Products

Designed for the Monogram kit, enough for one aircraft...

Waterslide Decals printed by Microscale (Insert printed by Cartograf). 5.5 x 8.5 inch sheet..

This set includes the following :Six (6) Thermally Protected Mk-82 500lb bombs with Conical FinsSix (6) M904 Nose FuzesSix (6) MXU-735 Solid Nose PlugsSix (6) Mk-43 TDD Proximity Fuzes (not shown)This bomb/fin configuration is correct for use from Vietnam to Desert StormBombs come as sho..

Mk-77 Fire Bombs, set of four (4)Items are 3D printed and come ready to paint. Some very light sanding of the forward section may be necessary to remove remnants of printing supports.Simply paint natural aluminum and install!..

** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

Vinyl Mask..

This set includes four (4) LAU-7/A-6 AIM-9 launchers designed to fit the pylons in the ZM F-4S. Used from 1988 to 1991..

This set includes four (4) launchers designed to fit the Tamiya F-4 wing pylons in anticipation for later variants. This launcher was used from 1976 to 1987..

This set includes four (4) missile launchers designed to fit the Tamiya F-4B and were used from 1958 to 1968..

This set includes two (2) LAU-10 rocket pods, eight (8) Mk-71 Mod 1 Rocket Motors, eight (8) Mk-32 Mod 0 AT/AP Warheads with Mk-93 Mod 0 Fuze and eight (8) Mk-32 Mod 0 AT/AP Warheads with Mk-188 Impact FuzesLAU-10 CAD by Matt FarrowRockets and warhead CAD by Dave Roof..

Set includes two (2) Thermally Protected Mk-83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces.Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs...

The FPU-6/A Oval Fuel Tank was developed for the F/A-18A/B Hornet in 1978 and used on the FSD aircraft, as well as a few fleet Hornets into the mid 1980's. It was phased out due to fatigue anomalies caused by the oval configuration.This set includes two hollow tanks that require assembly. Some li..

This set includes a holographic vinyl piece for the FLIR pod window and a small decal sheet with stencil data markings for the kits LAU-7 missile launchers.The decal is screen printed by Microscale...

Vinyl Mask..

This set includes a holographic vinyl piece for the FLIR pod window and a small decal sheet with stencil data markings for the kits LAU-7 missile launchers.The decal is screen printed by Microscale...

This set includes a total of six (6) HUD's for the F/A-18A/B/C/D Hornet cut in .005 clear styrene. They are direct replacements for the overly thick kit pieces. Simply cut from runner and attach in place of kit item. Recommend use with a photo-etch HUD frame...

Wheels designed to fit the Kinetic F/A-18A/B/C/D Hornet Kits..

This item includes 2 sets of stiffening plates applied to the left side of each vertical tail on F/A-18A/A+ aircraft in use by the USN, USMC, Canada, Australia and Spain.Made of self adhesive vinyl, they will work with both Kinetic and Hasegawa Kits...

This set includes six (6) GPS Antenna found on the F/A-18 Hornet, EA-6B Prowler, CH-46E and several other aircraft.3D printed, parts come as shown and are very easily removed from the supports using sharp sprue cutters or X-Acto type blade. Use Super Glue (CA) to attach to kit...

Vinyl Detail..

Vinyl Mask..

Canopy, wheel mask for Academy kits..

This set includes a holographic vinyl piece for the cockpit displays, a small decal sheet with stencil data markings for the kits LAU-7 missile launchers and silver pieces for the canopy strips.The decal is screen printed by Microscale...

Includes water slide decals for the stencils applied to the LAU-7 missile launchers and metallic silver vinyl pieces for the canopy static strips...