All Products
Pre-Order
Brand: Quinta Studio
SKU: Q-QR+48094
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$20.06
Pre-Order
Brand: Quinta Studio
SKU: Q-QR+48091
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$20.06
Pre-Order
Brand: Quinta Studio
SKU: Q-QR+48093
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$20.06
Pre-Order
Brand: Quinta Studio
SKU: Q-QD48567
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$9.16
Pre-Order
Brand: Inside the Armour
SKU: ITA348023
A pair of highly detailed 1/48 MG42s, improves poorly detailed infantry and German AFVs...
US$9.43
-69 %
Brand: Maestro
SKU: MMRBD7202
A set of Alps-printed decals with "FC" codes in three styles: 1935 model, 1964 model and modern. One sheet each of yellow and black letters. 1/72 scale. How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer..
US$1.76
-70 %
Brand: Maestro
SKU: MMRBD4802
A set of Alps-printed decals with "FC" codes in three styles: 1935 model, 1964 model and modern. One sheet each of yellow and black letters.Solid decal film. NOTE! The yellow letters have a slight striped appearance on distances less than 12 inches. This is because the right yellow hue does not exis..
US$2.30
-69 %
Brand: Maestro
SKU: MMRBD4801
How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal wit..
US$1.60
Pre-Order
Brand: Quinta Studio
SKU: Q-QP48049
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$8.24
Pre-Order
Brand: Quinta Studio
SKU: Q-QP48047
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$8.24
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-48534
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QD48534
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$25.70
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-48574
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QD+48574
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$37.79
Pre-Order
Brand: Quinta Studio
SKU: Q-QD48538
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$14.74
Pre-Order
Brand: Quinta Studio
SKU: Q-QD48540
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$15.93
-72 %
Brand: Maestro
SKU: MMRBD4803
How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal wit..
US$1.60
Pre-Order
Brand: Quinta Studio
SKU: Q-QD+48425
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$46.39
Brand: Red Roo
SKU: RRD4815
How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal wit..
US$2.49
Pre-Order
Brand: Dora Wings
SKU: DW-48059
L-20A Beaver - STOL utility transport aircraft for the U.S. Army, later redesignated U-6A in 1962, 968 built.Length 194mm
Wingspan 307mm** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and..
US$56.11
Brand: Montex
SKU: MON-K48089
2 canopy mask (outside & inside) + 1 insignia masksType : Paint MaskSuper Mask Series - contain masks for painting cabins and stencils for distinctive paintings based on photos and other primary sources. Super Mask series also contains colour airplane drawings in four projections depicting the place..
US$5.00
Pre-Order
Pre-Order
Brand: Inside the Armour
SKU: ITA348021
A very highly detailed cupola for 1/48 Churchill, Cromwell, Centaur and other british AFVs. replaces the poorly detailed cupola on kits, or allows you to backdate kits to earlier versions, such as the Tamiya Churchill/ Crocodile, to make a 1943/44 production tankIncludes separate hatches and bonus..
US$13.30
