All Products

Click HERE: Make anti slip on Merkava & Abrams model tanks - VMS Hull Tex tutorial Video"Scattered" type is used to create irregular aggregate based anti-slip patterns. Scattered type doesn't react with plastic and is reversible with VMS Clean Slate.A unique solution for creating realistic aggregate..

This is a resin dedicated version widely acclaimed Flexy 5K. Thanks to its formulation this glue can be used for gluing demanding resin parts that require a lot of manipulation and extra strong bond. The formula of VMS Flexy 5K Resin is optimised for thermoplastics so you can also glue multimedia mo..

This is a thinner version of widely acclaimed Flexy 5K glue, thanks to its formulation this glue can be easily used via capillary action. Glue is also more looper friendly than thicker types. As the original Flexy 5K glue forms flexible bond that withstands much more punishment than classic brittle ..

Glue for PLA resin and 3D printed models. Thanks to its formulation this glue can be used for gluing demanding 3D printed parts that require a lot of manipulation and extra strong bond. The formula of VMS Flexy 5K 3d is optimised for thermoplastic, including PLA resin so you can also glue multimedia..

A mix of ground brick powder and brick chunks ideal for an urban diorama. Fix using VMS Sand and ballast freeze or VMS PVA glue. Leave unpainted or paint over to change the tone. Particle size: mixed: fine earth 0.001 mm+, pebbles 1-4 mm...

A mix of actual fine light yellow sand and stones ideal for a desert diorama. Fix using VMS Sand and ballast freeze or VMS PVA glue. Leave unpainted or paint over to change the tone. Particle size: mixed: fine earth 0.001 mm+, stones 1-4 mm...

This is the finest, premium, light grey sand powder that will form very authentic, up to scale terrain with beautiful even texture. Any good base requires super fine, medium and coarse texturing materials. Mix with our bigger particle sized materials for added variety and authenticity. Fix using VMS..

Sometimes things go wrong, and your model receives an imperfect paint job. Don't worry, what seems like a failed model now will soon be ready for a new primer coat and the whole problem a distant memory! With Clean Slate rmvr 2.0 you will be able to easily remove paint off of your model with absolut..

Chipping medium. Brush a thin coat of chipping medium over initial paint coat and allow it to dry, force drying possible (low setting). Spray a 2nd coat of paint over so prepared layer of chipping medium and allow it to dry, force drying not recommended. Once dry you can start removing portions of p..

Chip & Nick is one of kind intelligent paint created to help you create super realistic chipping effects on your model with minimum skill. Paint works via VMS "reversed chipping" technique and any other classic technique such as sponge and fine brush chipping. Contrary to standard paint if you apply..

** These model kits are supplied in unassembled and unpainted resin components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

..

1 very highly detailed torpedo with optional wing, for Bristol Beaufort, Fairey Swordfish or other torpedo bombersITA3 parts are 3D printed and come attached to supports. These need to be removed and cleaned up before use...

A set of ten 1/72 vickers K guns commonly used on British aircraft. Hugely improved detail over kit items, easy to remove from the supports, and supplied in a pretectived printed box..

A small set of exterior parts for your Beaufort, that make a big impact. Includes shell chutes, pitot, DF antenna and hollow exhausts...

1/72 Bk.5 5cm cannon for the Airfix Me.410Includes hollow, pierced, muzzle break. Supplied with print supports which mus be removed and sanded down.1 barrel per packDrop fit replacement for the kit part..

** This model kit is supplied in unassembled and unpainted resin components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

3D printed 1/48 number 19 radio antenna bases6 x A set base 6x B set with high cage base 6 x B set with low cage base..

A set to improve the key exterior details of the gorgeous new Airfix 1/48 Bristol Bulldog. includes a new gun camera, new MG barrels, new, highly-refined gun sights, and engine cylinders with improved details and no seam to fill through the colling vanes!..

4 very highly detailed German ww2 KAR 98K rifles. 3D printed, requires removal from supports...

3D printed single piece with fine bar cage and highly detailed lights.3D printed parts are supplied supported and clean up is required..

(Type: model figures) This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

A set of 15 NATO amminition cans, with handles in three positions for variety. Perfect for throwing on an armour build, dioramas or figures. Better detail than plastic pieces, no assembly required, (only cleanup from the protective wafer)..

** This model kit is supplied in unassembled and unpainted resin components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...