Model Planes

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Wood 2 - Airbrush StencilCreate realistic wood grain patterns with an airbrush. This allows for the creation of any kinds of wood, such as freshly varnished wood, old grey wood, stained wood or even scorched wood. Article on the use of this stencil by Entoni Seperic on Aeroscale: http://www.aeroscal..

Honeycomb Radiator Mesh (30/10)This is a generic honeycomb radiator mesh suitable for scale 1/32 aircraft. It can be cut to size and used to replace plastic kit radiator parts that are often inaccurate or overscale. Unlike generic woven meshes, this will not unravel when cut.This radiator mesh can b..

..

The set comes with unpainted resin parts...

This is the harness used on Imperial Japanese Army aircraft in World War 2. Suitable for all Imperial Japanese Army aircraft with the "Ki" prefix used during WW2. No painting needed (except for painting the red quick-release lever). Simply remove the pre-cut straps from the backing paper, glue the ..

Commonly used in: - Bristol F.2b (in conjunction with the Lewis Mk II, Set GAS13-32056, or alternative variation, i.e. Lewis RNAS Pattern, Set GAS15-32074). - RAF RE.8 (in conjunction with the Lewis Mk II, Set GAS13-32056, or alternative variation, i.e. Lewis RNAS Pattern, Set GAS15-32074). - AMC..

This is a complete set of radiators to replace the photo-etched parts provided in the Tamiya 1/32 F4U Corsair kit. The set contains the oil coolers. No modifications needed, these parts are direct replacements for the kit parts.The oil cooler parts are made of stainless steel and provide a finer an..

..

Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet of photo etched parts with the buckles and cla..

Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet of photo etched parts with the buckles and cla..

- Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.- The straps can be set to whatever length you need, just as on the real thing.- The set in..

Scale 1/32. This is the standard seat harness used on all British-made / RAF aircraft until the end of WW2 and even after. Suitable for all wartime Spitfires/Seafires, Hurricanes, Mosquitoes, Typhoons, Tempests, etc.No painting needed, just remove the pre-cut belts from the backing paper, glue the d..

Scale 1/32. "Sutton A" Seat Harness. Designed by Oliver Sutton in 1917, this was the "Jack-of-all-trades" harness used on all British-made / RAF aircraft from 1918 until the beginning of WW2 (and even after). Suitable for all interwar British aircraft, especially biplanes. These harnesses saw acti..

This is a set of turnbuckles for rigging biplane models in scale 1/32. These are suitable for WW1 German and French aircraft as well as some British aircraft fitted with round cables (rather than the late-war airfoil wires). The package contains 80 rigging turnbuckles in photo-etched brass. By foldi..

This is a detail set to improve the new Revell scale 1/32 P-51D-5 model kit. The set contains a pair of bomb racks with separate sway braces in photo-etched stainless steel. These represent the type of bomb rack used only on the P-51D-5. These parts add extra detail and replace the kit parts that su..

This is a detail set to improve the new Revell scale 1/32 P-51D model kit. The set contains a set of separate undercarriage doors. These parts add extra detail and replace the kit part that is a single piece. which needs to be cut into four separate components and may suffer from sink marks...

This is a photoetched set that can add extra detail to your Messerschmitt Bf109 G or K model.Suitable for any 1/32 kit of the Bf109G/K such as Hasegawa / Revell / Pro Modeller / 21st Century Models.NOTE: The Hasegawa Bf109G10 and Bf109K4 kits have a slight flaw in the spine just aft of the canopy (..

This is a photo-etched set that can add extra detail to your Messerschmitt Bf109G model. Suitable for the 1/32 Hasegawa / Revell / Pro Modeller kits of the Bf109G.The canopy can be posed open or closed. The sliding side panels can be posed open or closed.The set contains one photoetched sheet, clear..

This is a photoetched set that can add extra detail to your Messerschmitt Bf109F model. Suitable for the new Hasegawa Bf109F kit. Also suitable for the 1/32 21st Century kit of the Bf109F or a Hasegawa / Revell / Pro Modeller Bf109G kit backdated to an F-type. This canopy is also suitable for Bf109E..

This is a complete set of radiators to replace the parts provided in the Cyber-Hobby (Dragon Wing Tech) 1/32 Messerschmitt Bf 109 E kits.The set contains both oil and coolant radiators. The radiator parts are made of stainless steel. The radiators can be sprayed with matt varnish to provide a very r..

Standard "beige" seatbelts (hemp/cotton mix).Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet o..

1/32 Luftwaffe pedals.This photo-etched sheet contains three types of German rudder pedals that cover the entire range of pedals used on German aircraft, such as Bf109 (early and late) , Bf110 (early and late), Me163, Ju88, etc.The set also includes two types of optional treadplate panels to modify ..

Designed for the scale 1/32 Zoukei Mura kits of the Focke Wulf Ta 1F2 H-0 and Ta 152 H-1. The set contains complete instrument panels, side consoles, rudder pedals, seat back armour, head armour and other parts to detail the cockpit supplied in the plastic kit. The instrument panels were designed to..