Model Planes

Re-usable die-cut mask setCorrected size roundels for 32nd scale LancasterThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too..

Upgraded high fidelity etched Nickel Silver Interior set to suit the HK Models Avro Lancaster B Mk. 1 kit.Nickel Silver has the same properties as brass, but weathers and scratches just like the real thing.Each set includes:Fully detailed Etched Nickel Silver Instrument Panel, Flight Engineer'..

Suggested scale: 1/32Designed for: 32nd scale Kfir conversionsThe set includes four sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully rem..

Suggested kit: Takom Horten Ho 229A kits in 32nd scaleRe-usable die-cut paint masksExterior & Interior includedThe set includes one sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is..

Each set includes:Instrumentation as found in the Spitfire, Hurricane, Mosquito and common to most RAF typesInstruments for flight control, navigation, engine, oxygen and ancillary managementEach instrument is separate on the decal sheet with a minimum of carrier filmIncludes a small..

* The set comes unassembled and unpainted...

Upgraded high fidelity etched brass Instrument Panel set to suit the Airfix 1/24 Spitfire kits.Each set includes:Fully detailed Etched Brass Instrument Panel componentsChoice of Blind Flying Panel styles - Square & RoundedPanels have holes for the addition of switches, knobs & levers (not in..

..

Upgraded high fidelity etched Nickel Silver Instrument panel & ancillaries to suit the Airfix 1/24 Supermarine Spitfire Mk. VIIIIncludes:Instrument Panel upgrade for Mk VIII variant 3D Printed Switchgear Seat Bulkhead & Armour Plate Seat mounts U/C selector correction & upgrade Rudder pedal trea..

Replacement Block Tread Mainwheels and detailed TailwheelThis set is 3D PrintedExperience of removing 3D parts is useful, but not essential. Any supports connected to detail can be cut with fine side cutters or a slitting disc, the remainder can just be broken off with snips or pressure with a f..

Simulated fabric & twill Sutton QK aircraft seat harness in 1/32 scale for RAF aircraft.Laser cut paper representing the straps & harnesses.Laser cut card representing the leather protective padding.Etched nickel silver and brass parts representing the buckles & hardwareAssembly required..

This set includes: A nely detailed one piece Warren McArthur Seat with adjustment handles Control Column with boot 2 x Mainwheels & hubs Taliwheel & hubThese are scaled up parts from 1/32 so may require adjustment to fit Airfix / Trumpeter 1/24 kitsExperience in removing 3D parts is useful but not e..

Highly detailed Me109 E propeller, backplate & spinner in 3D.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snips or by applying pressure with a fingernail. There ..

A huge set for a huge model! This set adds accurate detail and replaces, or adds to kit parts for the Airx 1/24 Stuka. The cockpit gets some major upgrades with seats and ancilliaries and the rubber kit tyres are replaced by accurate replacement wheels. Please note, these parts will require work, re..

This set includes: A nely detailed one piece Seat Control Column with boot 2 x Mainwheels & hubs Taliwheel & hub REVI 16B GunsightThese are scaled up parts from 1/32 so may require adjustment to fit Airfix / Trumpeter 1/24 kitsExperience in removing 3D parts is useful but not essential. Any supports..

..

This Detail-Up set can be used for Item 61114, 61118, and 61122. The set is very useful to give more detail to your model Tamiya F-14 model kits. - A stainless-steel alpha probe on the radome facilitates further rigidity and realism. (2pcs. included) - Photo-etched parts are included to depict seatb..

The items are 3D printed, self-trimming and painting needed. Please take off the parts with knifepoint carefully instead of pulling it. The items can be painted directly, without cleaning with detergent...

Contents Ammo box: 4 pieces Ammo: 5 piecesThe items are 3D printed, self-trimming and painting needed. Please take off the parts with knifepoint carefully instead of pulling it. The items can be painted directly, without cleaning with detergent...

The items are 3D printed, self-trimming and painting needed. Please take off the parts with knifepoint carefully instead of pulling it. The items can be painted directly, without cleaning with detergent...

The items are 3D printed, self-trimming and painting needed. Please take off the parts with knifepoint carefully instead of pulling it. The items can be painted directly, without cleaning with detergent...

The items are 3D printed, self-trimming and painting needed. Please take off the parts with knifepoint carefully instead of pulling it. The items can be painted directly, without cleaning with detergent...

..

..