Model Planes

3D Scanned & Designed10 Resin PartsOptional 2 Heads..

3D Scanned & Designed 18 Resin Parts / Optional 4 Heads..

Each set includes:Instrumentation as found in the F4F Wildcat, F4U Corsair, F6F Hellcat, TBM Avenger, SBD Dauntless and common to most USN / USMC typesInstruments for flight control, navigation, engine, oxygen and ancillary managementEach instrument is separate on the decal sheet with a minimu..

Each set includes:RAF, German and US components but suitable for most aircraft from any countryRadio faces and equipment including German FuG 10 and RAF R1155 Transmitters & ReceiversSwitches, dial knobs and leversCircuit breakers and electrical componentsFine relief etching for three-dime..

Each set includes:Instrumentation as found in the Spitfire, Hurricane, Mosquito and common to most RAF typesInstruments for flight control, navigation, engine, oxygen and ancillary managementEach instrument is separate on the decal sheet with a minimum of carrier filmIncludes a small..

Each set includes:A huge selection of between 180 - 400 multi-colour placards & dataplates as found in Luftwaffe aircraft from the 30s & 40sIncludes manufacturer dataplates for Junkers, Messerschmitt, Focke-Wulf, Henschel; plus cockpit ancillary manufacturers such as Bosch, Lorenz and AskaniaE..

Each set includes:A huge selection of over 200 multi-colour placards & dataplates as found in RAF, USAAF, US Navy, US Marine Corps aircraft and common to most Allied aircraft typesDataplates for cockpit instrument panels, sidewalls, radios, throttle & flap quadrants and oxygen/air cylinders etc...

The masks are re-usable.The set includes one sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be use..

The masks are re-usable.The set includes one sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be use..

Re-usable die-cut paint masksThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can ..

Suggested kit: Supermarine Spitfire kits in 48th scaleRe-usable die-cut paint masksThe set includes one sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted m..

Each set includes:RAF, German and US instrument bezelsCovers most eras - WW1 to JetsFine relief etching for mounting studs and knobs / switchesDifferent diameters for each design to suit your build or kit partSingle, dual and triple mounted instrument bezels supplied..

Re-usable die-cut mask setThe set includes three sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can ..

P-38F/G Lightning Canopy, Lights & Wheels Paint Mask Set 1/48Suggested scale: 1/48Suggested kit: Tamiya #61120Re-usable die-cut mask set - Exterior and Interior includedThe set includes three sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is ..

1/48 Scale 3D Designed 4 Resin Parts / Brass Wire..

The set includes three sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over and over again. It is f..

The set includes two sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over and over again. It is fle..

The set includes two sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over and over again. It is fl..

Suggested use: Trumpeter Mi-24A Hind B #05828The set includes two sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, ..

..

P-38F/G Lightning Insignia Paint Mask Set for 1/48 Tamiya #61120 + Bonus MarkingsSuggested scale: 1/48Suggested kit: Tamiya #61120Re-usable die-cut mask set - Features the Lightning insignia included in #61120 + 1 Bonus Set - "Texas Terror"The set includes one sheet of pre-cut masks (shown i..

Paint Mask: Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model b..

Suggested kits: Kinetic Gr.1/Gr.3, Kinetic AV-8A, Tamiya AV-8ARe-usable die-cut mask setThe set includes two sheet of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted mode..

..