Model Planes

Resin wheels early with diamond pattern for B-26 Marauder kit..

The Canadair Sabre is a jet fighter aircraft built by Canadair under licence from the North American Aviation. A variant of the North American F-86 Sabre, it was produced until 1958 and used primarily by the Royal Canadian Air Force (RCAF) until replaced with the Canadair CF-104 in 1962. Several oth..

Sabre Mk 5's introduced into the German Luftwaffe during 1957. The Canadair Sabre Mk 6 was the final variant and was considered to be the "best" production Sabre ever built. Among the Bundes Luftwaffe units that flew the Sabre Mk 6 was JG 71 Richthofen, the first fighter unit of the reconstituted ai..

Lockheed P-38 F/G Lightning sagged wheel set for TAMIYA 1/48 kit Consist of the Firestone block type tires most commonly seen in type F/G Accurate trade pattern and wheel shape Representation of bulged tire shape by weight. Total 6 resin parts and Wheel mask..

Wing Commander Guy Gibson, VC, DSO & Bar, DFC & Bar was the first Commanding Officer of No. 617 Squadron, which he led in the "Dam Busters" raid in 1943 which resulted in the destruction of two large dams in the Ruhr area of Germany. He was awarded the Victoria Cross.The Insignia depicts his aircr..

Lancaster "S" for Sugar completed 100 successful bombing missions during her service with the RAF without being shot down.This set includes only the serial numbers, code letters and other markings. The camouflage pattern is not included and can be bought seperatley. See TNMXX-M90.Please check yo..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Mk IID started in 1942, including additional armour for the pilot, radiator and engine.Mk Ils were used in ground support, where it was quickly learned that destroying German tanks was difficult; the cannons did not have the performance needed, while bombing the tanks was almost impossible. The solu..

From November 1941, beginning in the Libyan desert, it had to face a new formidable opponent: the new Regia Aeronautica Macchi C.202Folgore. The Italian aircraft proved superior to the Hawker fighter(112] and, thanks to its excellent agility and a new, more powerful inline engine licence-built by ..

Nightfighters were were sprayed matt black on the undersideThe Hurricane II armed with four 20 mm (.79 in) Hispanos become the Mark IIC, using a slightly modified wing. Most mark II were built as able or converted to carry external stores. By then performance was inferior to the latest German figh..

Flown by Adolf Galland this scheme is sometimes portrayed in an upper surface three tone camouflage, but third colour (RLM 61) was applied only after the plane was handed over from 3 to the Nationalist Gruppo de Cadena 4-G-2. Galland had the Maltese Cross as a personal symbol during the Spanish Civi..

The Heinkel He 111 was a German bomber aircraft designed by Siegfried and Walter Gunter at Heinkel Flugzeugwerke in 1934. Due to restrictions placed on Germany after the First World War prohibiting bombers, it masqueraded as a civil airliner, although from conception the design was intended to provi..

The Hawker Siddeley Harrier is the first of the Harrier Jump Jet series of aircraft. It was developed in the 1960's as the first operational close-support and reconnaissance fighter aircraft with vertical/short takeoff and landing (V/STOL) capabilities and the only truly successful V/STOL design of ..

The Hawker Siddeley Harrier is the first of the Harrier Jump Jet series of aircraft. It was developed in the 1960's as the first operational close-support and reconnaissance fighter aircraft with vertical/short takeoff and landing (V/STOL) capabilities and the only truly successful V/STOL design of ..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Set includes two carts and two 250 Lb bombs with decals. Made with 3D technology...

..

The British Fleet Air Arm (FAA) received 1,263 F6Fs under the Lend-Lease Act; initially it was known as the Grumman Gannet Mark I. The name Hellcat replaced it in early 1943 for the sake of simplicity. The F6F-3 being designated Hellcat Mk.I, the F6F-5, the Hellcat II. The camouflage pattern varied..

The original factory finish in the late 30's was silver dope. At the outbreak of WWII camouflage was hastily applied at squadron level to the Gladiators in service. This produced a variety of patterns. The Gladiator saw action in almost all theatres during the Second World War, with a large number ..

..

..