Model Planes
Pre-Order
Pre-Order
Pre-Order
Brand: Flying Leathernecks
SKU: FLM48-45
Designed for the Hasegawa series of kits, enough for one aircraft...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FLV48009
This set contains pre-cut self adhesive vinyl Det Cords for the forward and aft canopies. Designed to fit the Kinetic / Wolfpack Design kits.Transfer tape included and pre-attached...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8098
This set includes two (2) ailerons and two (2) elevators for the Special Hobby kit. These are direct replacements for the multi piece kit parts.CAD by Craig Sargent..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8104
This set includes six (6) cluster bombs and come as shown in the photo.CAD by P. Haupt..
US$14.15
Brand: SBS Model
SKU: SBS48086
Products made in 3D by SBS are not assembled or painted, and there may be colour differences depending on the resin.Printing supports removed.
#Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...
US$20.12
17 % OFF
US$16.52
Pre-Order
Brand: Flying Leathernecks
SKU: FLM48-35
Canopy, radome, wheel mask for Italeri / ESCI / AMT kits..
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8099
This set is designed to fit inside the kit and force the bottom seam into the proper position and allow easy gluing and seam work...
US$17.43
Brand: Flying Leathernecks
SKU: FL48-8087
This set contains two (2) PMBR's in an 'unloaded' configuration. Due to the fragile nature of some of the components, the PMBR comes attached to the print supports. Use a fine tipped sprue cutter to carefully remove the supports from the parts.Used on the A-4 and TA-4 Skyhawk, OV-10 Bronco, P-3 Or..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8088
This set contains two (2) PMBR's in a 'loaded' configuration, and twelve (12) Mk-76 practice bombs. Due to the fragile nature of some of the components, the PMBR comes attached to the print supports. Use a fine tipped sprue cutter to carefully remove the supports from the parts.Used on the A-4 and..
US$11.79
Brand: Flying Leathernecks
SKU: FL48-8089
This set contains two (2) PMBR's in a 'loaded' configuration, and twelve (12) BDU-33 practice bombs. Due to the fragile nature of some of the components, the PMBR comes attached to the print supports. Use a fine tipped sprue cutter to carefully remove the supports from the parts.Used on the A-4 an..
US$11.79
Brand: Flying Leathernecks
SKU: FL48-8080
Designed by Jarrad Bradley, this set includes four (4) Paveway IV warheads with guidance sections, four (4) Tail Sections, eight (8) seeker heads (four with covers), and sixteen (16) fins.Used on the UK Harrier II, Tornado, Typhoon, and F-35..
US$14.15
Brand: Flying Leathernecks
SKU: FLM48-52
Simple to use pre-cut vinyl canopy and wheel mask for the ICM OV-10A and OV-10D kits...
US$6.20
Brand: Flying Leathernecks
SKU: FL48-8073
While we have an extensive line of ordnance, we also understand that some modelers are perfectly content using the bombs provided in the kits. In some cases, the fuzes included with them leave a lot to be desired and may not be what you'd like to depict.This set provides 24 MXU-735 Solid Nose Plu..
US$7.39
Brand: Flying Leathernecks
SKU: FLM48-49
Canopy and Wheel mask designed for the Hobbyboss 1/48 MV-22 kit...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8055
This set includes four (4) Mk-84 2000lb bombs with four (4) Conical fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-84 was used extensively by the USMC during Operation Desert Storm...
US$14.15