Menu
Your Cart

Model Planes

Brand: Copper State SKU: CSM A32-005
A set of 2 wire wheels 610x85mm for German aircraft:Euler D.II Fokker A.I Fokker D.II Fokker D.IV Fokker E.I Fokker E.II Fokker E.III Fokker E.IVWheels are 3d printed with 0,15mm spokesCompatible with WNW:32018 Fokker E.II/E.III Early 32021 1/32 Fokker E.1 Early 32029 Fokker E.IV 32048 Fokke..
US$16.25
Brand: Copper State SKU: CSM A32-013
Seat backrest for Caudron G.III (British Type). This is an upgrade part, for a more accurate look in the open cockpit.3d printed parts..
US$7.65
Brand: Copper State SKU: CSM A32-008
Wicker Seat with cushion for the CSM 1/32 Bristol Scout model3d printed parts 2 parts in a set..
US$7.98
Brand: Copper State SKU: CSM E32-006
Anzani 10 was a 1913 10-cylinder air-cooled radial aircraft engine. Was used on many earoplanes including Caudron G.3 and G.4 also Vickers F.B.12c. 3d printed parts..
US$19.80
Brand: HGW SKU: HGW-172012
Special technology allows printing seatbelts of an appropriate scale including thickness and a transfer without the carrier film. Simply soak the seatbelts in the water, detach them from the paper, and set them on the pilot seat.Instructions:1. Put it on a drop of water for about 1 minute.2. Tak..
US$5.82 23 % OFF
US$4.43
Brand: HGW SKU: HGW-172026
Special technology allows printing seatbelts of an appropriate scale including thickness and a transfer without the carrier film. Simply soak the seatbelts in the water, detach them from the paper, and set them on the pilot seat. That is it!Instructions:1. Put it on a drop of water for about 1 min..
US$5.82 23 % OFF
US$4.43
Brand: HGW SKU: HGW-172024
Special technology allows printing seatbelts of an appropriate scale including thickness and a transfer without the carrier film. Simply soak the seatbelts in the water, detach them from the paper, and set them on the pilot seat. That is it!Instructions:1. Put it on a drop of water for about 1 min..
US$5.82 23 % OFF
US$4.43
Brand: HGW SKU: HGW-721020
Complete pack of positive rivets for Bf109 E-3 /4 /7 / Trop in 1/72 scale. Riveting sets from HGW Models give to surfaces of plastic kits highly realistic look. We recommend to apply them under the paint and when your model is painted just polish the surface to make the accessory visible. Suitable f..
US$14.27 19 % OFF
US$11.52
Brand: HGW SKU: HGW-172023
Special technology allows printing seatbelts of an appropriate scale including thickness and a transfer without the carrier film. Simply soak the seatbelts in the water, detach them from the paper, and set them on the pilot seat. That is it!Instructions:1. Put it on a drop of water for about 1 min..
US$5.82 23 % OFF
US$4.43
Brand: HGW SKU: HGW-172025
Special technology allows printing seatbelts of an appropriate scale including thickness and a transfer without the carrier film. Simply soak the seatbelts in the water, detach them from the paper, and set them on the pilot seat. That is it!Instructions:1. Put it on a drop of water for about 1 min..
US$5.82 23 % OFF
US$4.43
Brand: HGW SKU: HGW-672002
HGW's masking patterns, for clear parts. Printed number on each part - for better orientation during application..
US$8.42 19 % OFF
US$6.80
Brand: HGW SKU: HGW-148591
Harnesses designed for Wildcat. Belts are made from microfibre and in combination with included photo etched buckles they look highly realistic. This product is available in 1/48 scale.Accessory Features - Contains micro-fabric and photo-etched highly detailed parts - Belts are fully functional - mo..
US$10.37 20 % OFF
US$8.24
Brand: HGW SKU: HGW-148419
Special technology allows printing these details of an appropriate scale including thickness and a transfer without the carrier film. Simply soak the detailed parts in the water, detach them from the paper, and set them where it's needed. That is it!Instructions:1. Put it on a drop of water for ab..
US$5.82 23 % OFF
US$4.43
Brand: HGW SKU: HGW-148558
Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut...
US$9.72 21 % OFF
US$7.65
Brand: HGW SKU: HGW-148538
Seat belts, suitable for plastic scale aircrafts, are made from micro-plastic foil. In combination with attached photo-etched buckles this accessory looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut.Accessory Features:- Contains highly detailed ..
US$9.72 21 % OFF
US$7.65
Brand: HGW SKU: HGW-548028
Decal set designed for model Sopwith Camel in 1/48 scale from Eduard. This is faded pine tree imitation. Decal is not transparent so it is possible to apply it to unpainted surface.Pasted/fixed/glued, puttied and polished model paint by base white (it is suitable to polish also this coloured layer b..
US$9.07 18 % OFF
US$7.39
Brand: HGW SKU: HGW-548029
Decal set designed for model Sopwith Camel in 1/48 scale from Eduard. This is faded pine tree imitation. Decal is not transparent so it is possible to apply it to unpainted surface.Pasted/fixed/glued, puttied and polished model paint by base white (it is suitable to polish also this coloured layer b..
US$9.07 18 % OFF
US$7.39
Brand: HGW SKU: HGW-148008
Micro-plastic seat belts designed for aircraft P-47 Thunderbolt. Belts are made from micro-plastic foil and in combination with attached photo etched buckles they look highly realistic. This product is available in 1/48 scale.- microplastic sheeting, metallic buckles- it is possible to make seat bel..
US$8.42 23 % OFF
US$6.47
Brand: HGW SKU: HGW-148002
Micro-plastic seat belts designed for plastic scale aircrafts. Belts are made from micro-plastic foil and in combination with attached photo etched buckles they look highly realistic. This product is available in 1/48 scale.- microplastic sheeting, metallic buckles- it is possible to make seat belts..
US$5.82 23 % OFF
US$4.43
Showing 3721 to 3744 of 36726 (1531 Pages)