Model Planes

Designed by Petr Haupt, this set includes two (2) LAU-33 Pods, four (4) Mk-71 Rocket Motors, four (4) Mk32 Mod 0 anti tank / anti personnel warheads with Mk188 Impact Fuzes and four (4) Mk32 Mod 0 warheads with Mk93 proximity fuzes..

This set includes correctly shaped and sized LEX Fence parts applicable to all 1/48 F/A-18A/B/C/D Hornet kits...

Set of 8 correctly sized and shaped pitot tubes for use on the Legacy F/A-18, F-14, A-7, F-8, AV-8B and several other aircraft that use this style of pitot tube.3D printed and lightly supported for easy removal from block...

This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used exclusively and frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm.CAD by Craig Sargent..

3D ResinThis set includes two (2) AERO-1D 300 gallon fuel tanks with the single fin tail. Each tank is made up of four parts. Some light sanding will be needed to remove the small nibs from the print supports.Like most of our items, parts are removed from the print supports prior to curing and pa..

3D ResinAN/ALQ-144, ready to paint and attach to your model.For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10..

3D ResinThis set includes 6 buckets that can be used to replace those found in kits that may be under detailed...

This set of pylons corrects the inaccurately shaped pylons included in the Academy kit. Each set is 3D printed to ensure the best quality possible, as well as to minimize the work required to prepare them for installation on your model.Sets have been updated and now include separate BRU-32 bomb ra..

The AH-1Gs from the later batches differed from the earlier ones by having a M28 dual weapon turret in their noses. This turret enabled the use of various combinations of the Minigun or grenade launcher depending mainly on the pilot's preferences. The very same feature is possible here with our deta..

The MG15 machine gun, developed in the 1930s by the Rheinmetall-Borsig company, became the standard Luftwaffe machine gun. It was widely used as a hand-manipulated weapon in various Luftwaffe aircraft types, including the He 111, Ju 86, and early Ju 88s. However, in 1942, the new MG81 began to gradu..

Detailed resin cast fixed machine guns as fitted to the ventral gun pod and a fixed machine gun directly replace the original parts in the kit and offer substantially higher levels of detail. Designed for Airfix kit...

Nicely detailed nosewheel well for any version of the British BAC Lightning jet interceptor. Contains also detailed nosewheel doors. For Airfix kit or Eduard reboxing...

This British bomb sight was utilised on many British WW2 aeroplanes as was the Mosquito or Lancaster. 3D print with a fret of etches...

Detailed cannon barrels resin cast parts depicting both types used with the Tempest. The long barrels fit only the Tempest Mk.V ser.1 aircraft while all the later aircraft were fitted with shorter barrels...

Nicely detailed resin cast undercarriage legs for Special Hobby Tempest kits. These legs are not only more detailed than the plastic ones, but being made from special heat-hardened resin material they also possess some extra rigidity...

The MG15 machine gun was developed in the 1930s by Rheinmetall-Borsig company and become the standard Luftwaffe machine gun that was used as hand manipulated weapon in many Luftwaffe aircraft types (He 111, Ju 86, early Ju 88s). In 1942, the new MG81 begun to gradually replace MG15 machine guns...

3D printed air-to-surface / anti-tanks missile recommended for helicopters such Alouette II, Alouette III, Scout, UH-1B Huey etc. kits..

#NOTE: The set does NOT include a model kit...

#NOTE: The set does NOT include a model kit...

#NOTE: The set does NOT include a model kit...

1 very highly detailed torpedo with optional wing, for Bristol Beaufort, Fairey Swordfish or other torpedo bombersITA3 parts are 3D printed and come attached to supports. These need to be removed and cleaned up before use...

A set of ten 1/72 vickers K guns commonly used on British aircraft. Hugely improved detail over kit items, easy to remove from the supports, and supplied in a pretectived printed box..

A new 1/48 Vickers K on an RAF twin mount, to fit the Airfix Lysander3D printed, these items arrive attached to their supports for safety, and will need some clean up after separation from the supports. Please note printed items are print on demand and have a 1 week lead time to dispatch..

A set of 4 x 1/48 RAF bomb carriers with outstanding detail3D printed, these items arrive attached to their supports for safety, and will need some clean up after separation from the supports...