Model Planes
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8101
This set includes four (4) octagon shaped drip pans commonly found under aircraft, both on the flightline and in hangar spaces. Great for use in dioramas to add a little bit more realism to your scene.Parts come as shown in photo. Very light sanding needed on one surface needed prior to painting...
US$7.39
Brand: SBS Model
SKU: SBS48063
Contains stainless steel PE#NOTE: The set does NOT include a model kit...
US$15.57
20 % OFF
US$12.38
Brand: SBS Model
SKU: SBS48064
Contains x 2 complete propellers#NOTE: The set does NOT include an aircraft model kit...
US$10.37
17 % OFF
US$8.57
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8103
This set includes six (6) SATCOM Antenna with short mount found on a number of Helicopters. Use fine sprue cutters to remove part from support and lightly sand base smooth. Attach using super glue (CA)...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8111
3D ResinThis set includes correctly sized vortex generators for the wings of the AV-8B Harrier. Pieces are attached to a jig used to help put them in the correct place.Remove VG's from kit wingApply small drops of CA to bottom of resin VG's, put in place using jig. When set, carefully cut the ji..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8112
3D ResinThis set includes a new compressor blade face to facilitate easier painting. Removal of the compressor blades from the kit intake piece is required. Also included are detailed air temperature probes. One for the port side of the vertical tail, and two for the inside of each intake. Two extra..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8135
3D ResinThis set includes eight (8) AOA Probes. Can be used on the F/A-18A-D, AV-8B, A-6E, EA-6B and several others...
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8100
This set includes fifteen (15) total air temperature probes used on a variety of aircraft.Designed by Craig Sargent..
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8004
Designed by Jason Liang, this new set corrects the horribly inaccurate TSS provided in the kit.Includes a holographic vinyl piece for the FLIR window. We recommend using a 5 minute epoxy, applied in thin layers to create the 'glass' for the TV windows...
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8002
The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR.Designed for the Kittyhawk kits..
US$7.39
Brand: Flying Leathernecks
SKU: FL48-8086
This set includes one (1) adapter and can be used on all F-4 kits. This adapter is used to carry the MER or TER on the centerline station...
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8085
This set includes three (3) ADM-141 TALD.The TALD was used with great success on SEAD missions in the opening stages of Operation Desert Storm in 1991. More than 100 were launched on the opening night of the war. This prompted the Iraqi air defense to activate many of its radars most of which wer..
US$11.79
Brand: Flying Leathernecks
SKU: FL32-2140
3D ResinThis set includes twenty four (24) USAF style solid nose plugs These are designed to work with all kit supplied bombs that may not have accurate or clean versions...
US$7.39
Brand: Flying Leathernecks
SKU: FL32-2114
3D ResinThis one piece boarding ladder is designed to fit both the Meng and Hasegawa Super Hornet / Growler kits. May also work with the Revell and Italeri kits, with possible modifications to kit needed.Designed by Richard VanZandt of Flightline Resin, item comes as shown in the photo...
US$9.75
Brand: Flying Leathernecks
SKU: FL32-2105
3D ResinThis set includes a total of four (4) tail stiffening plates commonly found on F/A-18A and F/A-18A+ Hornets. The four plates will complete two (2) models.3D printed, the plates have all of the rivet and screw fasteners visible. Simply remove from the support, sand the small attachment poin..
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL32-2106
3D ResinThis set includes six (6) GPS Antenna found on the F/A-18 Hornet, EA-6B Prowler, CH-46E and several other aircraft.3D printed, parts come as shown and are very easily removed from the supports using sharp sprue cutters or X-Acto type blade. Use Super Glue (CA) to attach to kit...
US$7.39
Brand: Flying Leathernecks
SKU: FL32-2044
This set includes four (4) octagon shaped drip pans commonly found under aircraft, both on the flightline and in hangar spaces. Great for use in dioramas to add a little bit more realism to your scene.Parts come as shown in photo. Very light sanding needed on one surface needed prior to painting...
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL32-2010
This set includes eight (8) corrected Pitot Tubes for use on the F/A-18A thru D, F-14A/B/D, A-7D/E and F-8E.Directly replaces kit parts in the Academy, Tamiya and Trumpeter kitsCAD by Dave Roof..
US$7.39
Brand: Flying Leathernecks
SKU: FL32-2103
3D ResinThis set includes six (6) SATCOM Antenna with short mount found on a number of Helicopters. Use fine sprue cutters to remove part from support and lightly sand base smooth. Attach using super glue (CA)...
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL32-2030
This set includes 9 pieces to Upgrayedd your Trumpeter AV-8B Day Attack Harrier kit...
US$9.75