Model Cars

Part manufactured and designed with 3D technology to replace the exhaust pipes of the Tamiya McLaren Senna model. It corresponds to the exhaust with 2 gas outlets (American / Japanese version).Family: Exhaust Scale: 1/24 Reference: DCL-PAR051 Item: McLaren Senna Includes: 3D printed parts To be us..

Part manufactured and designed with 3D technology to replace the exhaust pipes of the Tamiya McLaren Senna model. It corresponds to the exhaust with 3 gas outlets (European version).Family: Exhaust Scale: 1/24 Reference: DCL-PAR050 Item: McLaren Senna Includes: 3D printed parts To be used with: Ta..

Set with 8 fixed and hand-held fire extinguishers (4 of each type) at 1/24 scale, which reproduce the CI-O-DUE fire extinguishers used in the Lancia Stratos. A set of decals and cable are included to install the fixed extinguishing system. With this set of fire extinguishers you will give a greater ..

Side and rear windowsFamily: Window Scale: 1/24 Reference: DCL-VAC007 Item: Lamborghini Sesto Elemento Includes: other materials To be used with: Aoshima references 62210, 010730 and 1073..

Complete set, which allows to assemble up to four units of the Heinzmann extinguishing system used in competition vehicles. It includes 4 cylinders and all the accessories necessary to assemble a fixed manual extinguishing system. In addition, the set includes the activation valve, activation button..

Complete set, which allows to assemble up to four units, of the extinguishing system used in competition vehicles. It includes 4 cylinders of the equivalent size to 2,8 litre extinguishers, and all the necessary accessories for a fixed extinguishing system, whether manual or automatic. In addition, ..

Complete set, which allows to assemble up to four units, of the extinguishing system used in competition vehicles. It includes 4 cylinders of the equivalent size to 4,25 litre extinguishers, and all the necessary accessories for a fixed extinguishing system, whether manual or automatic. In addition,..

The set includes two resin parts, three clear resin parts and decals for upgrading to the "Supermirafiori" version the brake lights and rear indicators on the Fiat 131 scale model by Italeri / Esci / Revell.Family: Lights Scale: 1/24 Reference: DCL-PAR009 Item: Tail lights for Fiat 131 Abarth Incl..

Emergency button in 1/24 scale, which reproduces those used in modern competition vehicles for the electrical cut-off and activation of the extinguishing system, so you can use them in your scale models. 20 3D printed push buttons are included, as well as a decal sheet with the electrical cut-off an..

Set of easy push air jack connection valves for GT cars in 1/24 scale. Includes 12 units per set.Family: Detail Scale: 1/24 Additional scales: 1/25 Reference: DCL-PAR011 Item: Air jack connection valve Includes: resin parts Parts: 12 units..

Set of hood latches with pin, designed for use on 1/24 and 1/20 scale models. Includes a total of 12 closures made of resin by 3D printing. The extreme detail with which these closures are designed and manufactured provide greater realism to your models.Family: Bonnet pins Scale: 1/24 Additional s..

Set of 32 wheel nuts perfect for rally cars and street cars. 16 units with long screw and 16 units with short screw.Family: Nuts Scale: 1/24 Additional scales: 1/20; 1/25 Reference: DCL-PAR018 Item: Wheel nuts Includes: resin parts Parts: 16+16 units..

This kit replaces low detail parts of a fuel system in the base kit and introduces high level of realism into your build. FSM C7 kit uses over 30 parts (without wiring) in relation to 2 parts in the base kit. Kit contains: - engine cover; fuel pump; throttle body; air funnels (spare parts included);..

The set includes some resin parts, some 3d printed parts and decals for upgrading the tail and the brake lights and rear indicators to the "Supermirafiori" version on the Fiat 131 1/20 scale models by TamiyaFamily: Transkit Scale: 1/20 Reference: DCL-PAR045 Item: Fiat 131 Supermirafiori Includes: ..

Set of pneumatic fittings from the Decalcas "Paint & Go" range for detailing your models' brakes/cooling/fuel. systems in any scale, including variants for both straight and curved pieces with a 1.2mm diameter outlet. They are executed with the usual precision and realism found in Decalcas, resins p..

Set of pneumatic fittings from the Decalcas "Paint & Go" range for detailing your models' brakes/cooling/fuel... systems in any scale, including variants for both straight and curved pieces with a 1.2mm diameter outlet. They are executed with the usual precision and realism found in Decalcas, resins..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems... of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducin..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducing. ..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems... of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducin..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC014 Item: Yamaha YZF-R1M Includes: vacuum formed parts To be used with: Tamiya references TAM14133, HC-14133 and TMY14133..

Cable switch for fire extinguishing systems in 1/12 scale. It includes six 3D printed switches and decals with different logos for integrating the switch in your 1/12 scale models with full detail.Family: Detail Scale: 1/12 Reference: DCL-PAR063 Item: Fire Cable T Handle Includes: 3D printed parts..

Guide bushings for use on 1/12 scale brake discs. Enhance the realism of your brake discs with these bushings, which come separated into two parts, one of the pieces being the flat T-shaped outer bushing and the other being the inner nut. Made of resin using 3D printing, they reproduce all the detai..

Six battery master switches set casted in resin, perfect to be used with your scale kits in 1/12 scale.Family: Detail Scale: 1/12 Reference: DCL-PAR026 Item: Battery master switch Includes: resin parts and water slide decals Parts: 6 units..

Anderson-type connectors at 1/12 scale as those commonly used for the connection of battery chargers in competition cars and electrical power panels. Made in resin by 3D printing, they reproduce all the details, such as the "+" and "-" marks or the mounting nuts. In addition, they have holes so that..