Military Vehicles & Tanks

16-USM-03 1/16 ARVN Packs (South Vietnam)27 Pieces Army of the Republic of VietnamAmmo Cans Designed By M36 Modelling...

16-USM-02 1/16 Vietnam Accessories Set #237 Pieces (2 pads of 3D Printed Smoke Grenadesand M16 Mags)Marmite, Ammo Cans, and Radios Designed By M36 Modelling...

Kit cat.no. T-16008The set consist:95+ 3D-Printed Resin 1/16 track links 2x 3D-Printed Resin 1/16 Drive sprockets (left & right) 1x QuickWheel painting mask for track pads 1x QuickWheel painting mask for drive sprocketTRACKS ARE UNPAINTED..

The set consist:95+ 3D-Printed Resin 1/16 track links 2x 3D-Printed Resin 1/16 Drive sprockets (left & right) 1x QuickWheel painting mask for track pads 1x QuickWheel painting mask for drive sprocketTRACKS ARE UNPAINTED..

#NOTE: The set does NOT include a turret kit...

Turret Pieces, Deck Piece and a few bit to sprinkle on the kit.#NOTE: The set does NOT include a tank turret kit...

..

14x Complete 3D-Printed Resin 1/16 wheels (6 inner & 8 outer) 2x 3D-Printed Resin 1/16 spare wheels (outer) 3x sets of 14 wheel caps (3 types) 1x QuickWheel painting mask for drive sprocketWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16003The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16004The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16005The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16007The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16001The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

..

Mounted on single strapped frame (x 6 pcs)3D printed resin. Comes on printing supports which need to remove..

3D printed resin. Comes on printing supports which need to remove..

*Note: The set does NOT include any armour kit...

..

Products made in 3D by SBS are not assembled or painted, and there may be colour differences depending on the resin.Comes on printing supports which need to remove #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

3D printed resin. Comes on printing supports which need to remove..

The MX-6707/VRC Antenna mast base was part of the AS-1729 Vehicular Antenna, generally mounting a VHF antenna. The antenna base was commonly known as part of the VIC1 vehicle harness in Australian service. These antenna-based were used on numerous Australian and Western vehicles. The Australian vehi..

x5 Australian Modern-era 25mm ammunition boxes. Can be used for ASLAV-25 Type 1. Can be used as extra stowage as seen on a variety of vehicles in the modern era...

..

Note: This set does NOT include any armour kit.It contains resin and photo-etched parts...