Military Vehicles & Tanks

Water-slide DecalsFleshy pink for a coal thief's face?! Surely not... According to one very good close-up image of this particular Marder II, the shade inside the face was as dark as the green (assuming that it isn't brown) camouflage splotches around the vehicle. Not only that, the inside shade did..

Water-slide DecalsPart II covers all the tanks of C squadron and Regimental HQ. Like set 1, this set was also extremely difficult to produce due to the great number of markings on each tank and a phletora of typesets used for names and registration numbers. Apart from the omission of a Mark II n..

Most are familiar with the usual DAK palm trees in white as that is the most commonly seen colour. Followed by the black ones, although not as common as the whites but they certainly existed. The rather obscure types are the red ones! This set comes with 6 styles for each colour. The styles were acc..

Water-slide DecalsA 720th MP Btn. set for those who wants to model a variety of vehicles instead of all V100s. Covering "BEEP BEEP YOURAS" which used to be "FEELING GROOVY" from set D356063, and a M113A1 track, christened "BOUNTY HUNTER". Both vehicles seems to use the commonly seen yellow/green shi..

Type: water-slide decalsA comprehensive and versatile generic set of markings for the T-80U MBTs used heavily by the 4th Guards. Bort numerics (turret tactical numbers) include 3 versions: wide; wide-broken (occasionally found) and narrow digits used currently on all their T-80Us. Of interest are th..

This set features 4/12 Cavalry AFVs that fought in the Vietnam War. 3 M113A1 ACAVs and 1 M551 Sheridans. All of which featured colourful, visually interesting and striking markings. A great way to have both types of 4/12 CAV vehicles in one diorama setting! Also provided: full, accurate exterior M55..

3-73 Airborne Armour Regiment Sheridans during Operation Desert Storm. The distinctive tactical markings are now in black over Desert Tan camouflage. Also provided: Data Plates and Stencils for the AN/VSS-3A searchlight, and appropriate cold war era .50 Cal ammo box stencils. Generic tactical symbol..

This set features 11 ACR AFVs that fought in the Vietnam War. 4 M113A1 ACAVs and 5 M551 Sheridans. This set covers A, B and C Troop vehicles. A Troop, denoted by red markings and barrel rings. B Troop blue and C Troop white. Each vehicle comes with interesting markings, coupled with some interesting..

3 tracks from 1/5th Inf Rgt "Bobcats", all with rather large prominent red markings on the sides, except "Cambodian Jungle Busters". While the outlines of the white text has been meticulously captured, it's up to one whether to further their imagination by adding thickness to emulate shaving foam.....

Complete markings for ONE entire platoon (four 2nd platoon gun tanks from C company), plus three other vehicles. Two of which are HQ vehicles plus a C company commander's tank.Of special mention are the (not one but two!) HQ gun tanks. These vehicle are marked differently in many ways as compared to..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

..

..

Type: water-slide decalsWikings galore! All the possible number styles used by the Wiking Panthers fighting in the eastern front campaign! The numbers and balkankreuz have received hand-painted effects on the edges. The alpha-numerics are given in two distinct thickness. Now you should be able to bu..

The kit contains 6 Resinparts and 3d printed parts and a metal gun barrel.For building this conversion you need an KV-1 (Trumpeter)...

All parts made with 3D printing technology...

The set contains:- two leather sidebags- blanket and tyre pump- suitcase- M35 helmet- canteen - canister - coffee mug*Note: This set does NOT include any motorcycle kit...

(Type: model figures) This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required. #NOTE: The set does NOT include a vehicle model kit...

..

kit contains 5 resin parts...

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

The TMM is an early Cold War era vehicle launched bridge of Soviet origin. I was developed to allow Soviet forces to traverse small gaps and water and gaps that are wider than a single but do not require a pontoon. A single bridge section has a lenght of 10.5 meters and an infinite number can be con..

All parts made with 3D printing technology...

The M1120 HEMTT LHS (Load Handling System) is a M977 Heavy Expanded Mobility Tactical Truck with a load handling system i place of a flat bed/cargo body. The HEMTT is an eight-wheel drive, diesel powered, tactical truck used by the US military and others. The HEMTT is manufactured by Oshkosh Defense..