Hobby Tools & Supplies

..

Fast 10 second bond, non runny, fills gaps.A high strength cyano glue that does not run and is ideal for gap filling.Bonds: wood, plastic, metal, card, rubber etc. Being a metal tube Roket Cyano Gel has a long shelf life. 20ml...

For rapid customizing of plastic, resin, wood & metal models.This 2-part, fast- curing, epoxy putty will not shrink or crack and is pre-measured and packed for accurate mixing of the two parts. It sets in 10-15 minutes to a tough, lightweight plastic and unlike many other putties it is easy to ..

Liquid putty formulated with organic solvents, specially designed to fill large gaps and blemishes on your models. This putty will not shrink and can be sanded and painted once it has dried for 24 hours...

Liquid putty formulated with organic solvents, specially designed to fill medium-sized gaps and blemishes on your models. This putty will not shrink and can be sanded and painted once it has dried for 24 hours...

Strengthening powder for use with thin cyano adhesives to improve gap filling and toughness.Flows like liquid into spaces to take exact shape.Use for filling gaps where strength is needed. Sets in seconds with Roket Hot (AD43) or Rapid (AD44) cyano; can be filed, drilled and tapped...

- For remodeling and Semi-scratch-build- High density type - smooth surface- Curing time at 20~25 celsius degree is about 12 hours..

The next generation of strong lightweight fillers for foam and wood.An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated wi..

Strong, lightweight filler which sands easily.Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film...

A modelling paste which dries to a white, totally opaque, stone hard finish. It is used principally for rebuilding or restructuring models and miniatures, for textures and high reliefs. For extra high relief the paste should be applied in layers, allowing each to dry before applying the next. If a m..

..

A range of high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ??witches hat?? free flowing nozzle with matching over-cap to match the label. Available in 4min, 20min, and 1..

A range of high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ??witches hat?? free flowing nozzle with matching over-cap to match the label. Available in 4min, 20min, and 1..

Lightweight "free flowing" white powder which is mixed with polyester or epoxy resin to make an easy sanding strong filler.Can also be used to create snow effects (smaller than 1:48) with Scatter Grip glue (AD25)...

Famous "yellow" wood glue used in aeromodelling and professional applications where hard woods are used; dries crisper than PVA giving better sanding specially with balsawood.Will not pull joints as it sets, resulting in better dimensional stability important for airframe construction.Also sets at l..

Famous "yellow" wood glue used in aeromodelling and professional applications where hard woods are used; dries crisper than PVA giving better sanding specially with balsawood.Will not pull joints as it sets, resulting in better dimensional stability important for airframe construction.Also sets at l..

PT-35 Zap Z-Poxy 15 minute epoxy Resin features: - 15 MINUTE CURE - CLEAR FORMULA - TOUGH, PERMANENT BOND - SHOCK AND VIBRATION RESISTANT - EXCELLENT GAP FILLERUses: 15 MINUTE Z-POXY is a premium two part epoxy adhesive. The 15 minute cure time means faster building and faster repai..

Putty with organic solvents specially designed to cover joints and defects on your models. If necessary, it can be diluted with Extra Thin Cement A.MIG-2025 or with Odourless Enamel thinner A.MIG-2019 and applied with a brush. This formula will not shrink and dries in 24 hours. It can be sanded to o..

Use for filling seams and customizing.Use masking tape to limit the area where the putty will spread. Use a toothpick or spatula type tool to apply the putty evenly over the seam or depression. Remove as much excess putty as possible while it is still wet. Let the putty drive overnight, then sand th..

..

GREENPOWER is an epoxy putty that when mixed both components at room temperature allows to recreate any model's piece. Once mixed both components the result becomes a sticky green putty. Then you have about 90 minutes to mold and detail, reaching maximum hardness after 24 hours.To obtain smoother ..

Acrylic putty specially designed to cover joints and defects on your models. It can be diluted or cleaned with water before drying and is very easy to apply with a brush. After drying for 24 hours, it can be sanded to obtain a smooth and very resistant surface ready for engraving and painting.1 - Wh..

The set contains Z-Poxy Resin and Z-Poxy Hardener.Product Features:- 5 minute cure- Clear formula- Tough permanent bond- Shock and vibration resistant- Excellent gap filler5 Minute Z-Poxy is a premium two part epoxy adhesive that dries clear. Vibration resistant and fuel proof, this epoxy is perfect..