CMK

The early Vampire jet fighter aircraft could be fitted either with standard underwing fuel tanks on a pylon or with a 'slipper' type similar to those known from the Mosquito. The Special Hobby kit brings just the usual fuel tanks, now this CMK set brings the modeller detail resin cast parts of the f..

The Sycomor Dispenser pod saw service with Mirage F.1 export versions. It comes as a ready to use one-piece item, the pylon is an integral part of the dispenser...

Superbly detailed, resin cast wheels, the tyres come with nice representation of the tread. 3D designed, direct replacement to somewhat simply-looking wheels in the kit. Fit any version of the Viggen...

The Viggen thrust reverser petals feature higher level of details compared to the slightly simplified styrene items of the kit. The new ones have beed 3D designed and can be used with any version of the Viggen...

This finely detailed resin cast replica of the Viggen's retractable turbine directly replaces the original, slightly less detailed item in the kit. The set has been 3D designed and can be used with any version of the Viggen...

These resin cast air brakes offer better details compared to the original ones in the kit. They are 3D designed and you can use them to improve any version of the Viggen...

The TAT-102 was a remotely-controlled gun turret installed to early batches of the AH-1Gs. It contained one 7.62mm Minigun or alternatively a grenade launcher. This resin cast turret brings higher levels of detail than the styrene item from the kit...

This set brings brand new undercarriage wheels with spoke hubs. 3D-designed / created master patterns fit model for Fujimi...

The 30.5cm M.11 Morser was a large caliber howitzer developed by Skoda Works between 1907 and 1911. In 1912, it was finally introduced to service as the M.11 Morser. The outbreak of World War One saw the Austro-Hungarian army equipped with as much as 24 of these high-performance weapons. Possessing ..

An all-resin kit of an Austro-Hungarian WW1 mortar. The master has been designed and produced using 3D CAD/CAM system. The model offers splendid levels of detail, similar to those of our other kits of WW1 weapons.The M.98 mortar was the first state-of-art Skoda-produced mortar to be introduced to ..

During WW1, the army of the German Empire used several types of mortars. Mortars were fairly new kind of military equipment and various armies employed them for the first time in the first decades of the 20th century. The 7.58cm Leichter minenwerfer was a light-weight weapon comparing to other morta..

German heavy trench mortar of the Imperial German Army. It was designed before WWI by Rheinmetall and was in service until the end of the war. The mortar was transported using an attached pair of wheels and before fire, it was placed in a pit or trench protecting the mortar and its crew. Later in th..

Heavy 22.5cm M.15 Minenwerfer or mortar that was produced since 1915 by Bohler company in Vienna which supplied this weapon to armies of Austria-Hungaria and Turkey. Both these countries were using the mortar up to the end of the First World War. The model offers convincing detail throughout as it ..

This set brings completely new main undercarriage wheels. The master parts were created using 3D and produced on a 3D printer. The wheels offer much higher levels of detail than the original parts, tyres come with better tread pattern. Can be used with any ICM's Fw 189 kit, i.e. A-1, A-2 and A-1 Nig..

This set brings two nicely detailed Martin Baker MB 8LC ejection seats designed for an Airfix kit of the British Tucano T.1 aircraft. The seats are cast as one piece along with the pilots' harness...

The Airfix Short Tucano four-blade propeller repair kit offers separately cast propeller blades and a propeller cone of the correct shapes...

For the new Special Hobby P-40N kits (later blocks), but not just for these kits, has been designed this set which brings the modeller a new cast pilot's seat with belts. 3D designed, the seat master pattern was produced using a 3D printer...

The later blocks of the P-40N fighters from Special Hobby, but also any other kit of this version will no doubt enhance their look by the addition of this new seat. No seat belts, 3D designed, master parts produced using a 3D printer...

This seat is intended to be used with the new Special Hobby P-40 kits of the E, K, M and N-1 verisons or the earlier released P-40 F,L kits and will no doubt fit other P-40 models too. The master part of the seat was 3D designed and printed for the best levels of detail. The US type seat belts are c..

The set contains all new wheels with cross tread tyres, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts...

The new Special Hobby P-40 Warhawk kits will benefit from the addition of this set which offers the modeller new and nicely detailed cockpit sidewalls and a new control stick. The cast part replace directly and easily the original styrene items. Not much surgery needed. The master parts were 3D desi..

The new Special Hobby models of the Kittyhawk IV (basically a P-40N with some British equipment), but not just these kits, will no doubt benefit from the new pilot's seat cast with the quite distinctive British Sutton harness. As many of our recent sets, also this one has been 3D designed and the ma..

This set contains a resin pilot's seat with belts which easily replaces the original kit's part and offer higher levels of detail. Designed to fit Hasegawa's 1/72 Mitsubishi J2M3 Raiden (Jack) model..

Even such a nice kit as the new ICM Fw 189A no doubt is has its small flaws. One of them obviously is the incorrectly shaped engine nacelle air intakes. Our set offers you new front sections of the nacelles into which just fit another resin parts portraying the front pairs of Argus As 410 engine cyl..