1/72 North Vietnamese MIGs of the Vietnam War Decals
Type: Water-slide decals
1. Shenyang J-5 (MiG-17F 'Fresco-C') 2011 of Ngo Duc Mai, 923rd 'Yen The', 12 May 1967.
2. MiG-17F 'Fresco-C' 2047 of Nguyen Van Bay, 923rd 'Yen The', 19 April 1972.
3. Shenyang J-5 (MiG-17F 'Fresco-C') 2050 of Pham Ngoc Lan, 921st'Sao Do', 6 November 1965.
4. MiG-17F 'Fresco-C' 2072 of the 921st'Sao Do', 1968.
5. MiG-17F 'Fresco-C' 2077 of the 923rd'Yen The', 1968.
6. MiG-17PF 'Fresco D' 4721 of Lam Van Lich, 921st 'Sao Do', 3 February 1966.
7. Shenyang J-6 (MiG-19S) 'Farmer C' 6032 of Nguyen Hong Son, 925th Fighter Regiment, 8 May 1972.
8. Shenyang J-6 (MiG-19S) 'Farmer-C' 6066, 925th Fighter Regiment, 1972.
9. MiG-21PF 'Fishbed-D' 4324 of Nguyen Dang Kinh, 921st 'Sao Do', 19 November 1967.
10. MiG-21PFM 'Fishbed-F' 5015 of the 921st 'Sao Do', 1972.
11. MiG-21PFM 'Fishbed-F' 5066 of the 927th 'Lam Son', 1972.
12. MiG-21PFM 'Fishbed-F' 6122 of the 927th 'Lam Son', 1972.
13. MiG-21UM 'Mongol-B' 5903 of the 927th 'Lam Son', 1972.
14. MiG-21MF 'Fishbed-J' 5121 of Pham Tuan, 921st 'Sao Do', 27 December 1972.
15. MiG-21PF 'Fishbed-D' 4326 of Nguyen Van Coc, 921st'Sao Do', 7 May 1968.
16. MiG-21PFM 'Fishbed-F' 5020 of Nguyen Tien Sam, 927th 'Lam Son', 5 July 1972.
17. MiG-21PF 'Fishbed-D' 4128 of 921st 'Sao Do', April 1966.
18. MiG-21F-13 'Fishbed-C' 4420 of Nguyen Ngoc Do , of the 921st 'Sao Do', 16 September 1967.
19. MiG-21F-13 'Fishbed-C' 4520 of Pham Thanh Ngan, of the 921st 'Sao Do', 16 September 1967.
20. MiG-21PFM 'Fishbed F' 5006 of the 921st 'Sao Do', February 1972.
21. MiG-21PFM 'Fishbed-F' 5033 of Tran Viet, 921st . 'Sao Do', 27 December 1972.
22. MiG-21PFM 'Fishhed-F' 5026 of the 927th 'Lam Son', 1972.
23. MiG-21MF 'Fishbed-J' 5117 of Truong Ton, 927th 'Lam Son', 24 July 1972.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
1. Shenyang J-5 (MiG-17F 'Fresco-C') 2011 of Ngo Duc Mai, 923rd 'Yen The', 12 May 1967.
2. MiG-17F 'Fresco-C' 2047 of Nguyen Van Bay, 923rd 'Yen The', 19 April 1972.
3. Shenyang J-5 (MiG-17F 'Fresco-C') 2050 of Pham Ngoc Lan, 921st'Sao Do', 6 November 1965.
4. MiG-17F 'Fresco-C' 2072 of the 921st'Sao Do', 1968.
5. MiG-17F 'Fresco-C' 2077 of the 923rd'Yen The', 1968.
6. MiG-17PF 'Fresco D' 4721 of Lam Van Lich, 921st 'Sao Do', 3 February 1966.
7. Shenyang J-6 (MiG-19S) 'Farmer C' 6032 of Nguyen Hong Son, 925th Fighter Regiment, 8 May 1972.
8. Shenyang J-6 (MiG-19S) 'Farmer-C' 6066, 925th Fighter Regiment, 1972.
9. MiG-21PF 'Fishbed-D' 4324 of Nguyen Dang Kinh, 921st 'Sao Do', 19 November 1967.
10. MiG-21PFM 'Fishbed-F' 5015 of the 921st 'Sao Do', 1972.
11. MiG-21PFM 'Fishbed-F' 5066 of the 927th 'Lam Son', 1972.
12. MiG-21PFM 'Fishbed-F' 6122 of the 927th 'Lam Son', 1972.
13. MiG-21UM 'Mongol-B' 5903 of the 927th 'Lam Son', 1972.
14. MiG-21MF 'Fishbed-J' 5121 of Pham Tuan, 921st 'Sao Do', 27 December 1972.
15. MiG-21PF 'Fishbed-D' 4326 of Nguyen Van Coc, 921st'Sao Do', 7 May 1968.
16. MiG-21PFM 'Fishbed-F' 5020 of Nguyen Tien Sam, 927th 'Lam Son', 5 July 1972.
17. MiG-21PF 'Fishbed-D' 4128 of 921st 'Sao Do', April 1966.
18. MiG-21F-13 'Fishbed-C' 4420 of Nguyen Ngoc Do , of the 921st 'Sao Do', 16 September 1967.
19. MiG-21F-13 'Fishbed-C' 4520 of Pham Thanh Ngan, of the 921st 'Sao Do', 16 September 1967.
20. MiG-21PFM 'Fishbed F' 5006 of the 921st 'Sao Do', February 1972.
21. MiG-21PFM 'Fishbed-F' 5033 of Tran Viet, 921st . 'Sao Do', 27 December 1972.
22. MiG-21PFM 'Fishhed-F' 5026 of the 927th 'Lam Son', 1972.
23. MiG-21MF 'Fishbed-J' 5117 of Truong Ton, 927th 'Lam Son', 24 July 1972.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
| General Info | |
| Scale | 1/72 |
| Type | Model Upgrade/Accessory |
| Subtype | Decals / Stickers |
- Stock: In Stock
- Reward Points: 20
- SKU: PRS72-116
- 2pcs in Stock
Print Scale Decals
MRP: US$16.41 Save: US$3.02
18% OFF
US$13.39
(excl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.