Zero Paints 3002 Clearcoat Lacquer 100ml (Pre-thinned for Airbrushing)

For more info about Zero paints, please read Zero Paints Colour Description.pdf
100ml of 1K High Quality Pre-thinned Clearcoat Lacquer supplied in a glass bottle.
Instructions for use :
Leave the basecoat colour for 15/30 minutes before applying clear coat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each), if required you can build up multiple layer to suit your required level of gloss/shine
Air Drying Times at 20°C,
Dust Dry : 30-40 mins
Touch Dry : 4 Hrs
Full Hardness : 24 Hours,
Thoroughly Dry : 48 Hours. Can be polished after 48 hours at 20°C
Do not use over waterbased colour coats
Shelf Life : at least 2 years if stored in tightly closed original containers at cool temperatures.
Decals : So far we have found that the pre-thinned clear coat is safe over all major brands of Decals like, Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc. but please test on cheaper inkjet printed decals first
Always apply light mist coats over decals NEVER go straight on with wet coats, this could melt the decals

Please Note: During 2020/2021 Zero Paint has struggled to get the glass bottles they have used years. Now they have swapped to PET plastic bottles after testing. Despite the obvious difference in the visual size, the new and old bottles have exactly the same capacity.