Liang Model LIANG-0416 1/35 1/32 Glass Wine Bottle x36
Tips for using 3D-print parts
1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using.
2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it.
3. If there is residual resin or debris on the surface of the parts, it is recommended to clean them with alcohol.
4. 3D-print parts are relatively fragile. If they break during transportation, please use CA glue to adhesive.
5. Before using transparent 3D-print parts, please spray 2-3 layers of varnish to enhance the permeability.
1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using.
2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it.
3. If there is residual resin or debris on the surface of the parts, it is recommended to clean them with alcohol.
4. 3D-print parts are relatively fragile. If they break during transportation, please use CA glue to adhesive.
5. Before using transparent 3D-print parts, please spray 2-3 layers of varnish to enhance the permeability.
| General Info | |
| Scale | 1/35 |
| Type | Diorama Accessory |
| Subtype | Homeware / Grocery |
| Minimum Age | 14 Years |
- Stock: In Stock
- Reward Points: 14
- SKU: LIANG-0416
- 1pcs in Stock
Liang Model
MRP: US$13.93 Save: US$2.54
18% OFF
US$11.39
(incl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
Ni. Si. Tube #Dia. 0.4mm, 0.6mm, 0.8mm, L: 305mm (pack inc. 1 pc of each type)
Ni. Si. Tube #Dia. 0.4mm, 0.6mm, 0.8mm, L: 305mm (pack inc. 1 pc of each type)
Albion Alloys • AA-SFT5
US$9.19
Micro Brass Tube #Out. Dia. 0.5mm, Wall 0.1mm, Inner Dia. 0.3mm, L: 12" (3pcs)
Micro Brass Tube #Out. Dia. 0.5mm, Wall 0.1mm, Inner Dia. 0.3mm, L: 12" (3pcs)
Albion Alloys • AA-MT1
US$9.19
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.