Model Planes

(F/D&S-4824 and F/D&S-7205) "Colours and Markings of US Navy F6F Hellcats Part 2". This set options for 12 F6F-5 Hellcats in the Glossy Sea Blue scheme:- F6F-5 VF-7, USS HANCOCK 1944 "White 17"- F6F-5 VF-9, USS YORKTOWN, 1945 "White 9"- F6F-5 VF-11, USS HORNET, 1944 "White 9"-F6F-5 VBF-12, U..

Colourful camouflaged and yellow Avro Ansons as used in the BCATP (British Commonwealth Air Training Plan)..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

14 options for the 1/72 BPK P-8A kit. Here's the list of aircraft included in this mega set:-VP-4 P-8A 168851, NAS Whidbey Island, 2021-VP-5 P-8A 169551, NAS Jacksonville, 2021-VP-8 P-8A 168760, NAS Jacksonville, 2019 (lo-viz unit markings)-VP-8 P-8A 169570, NAS Jacksonville, 2021 (hi-viz un..

..

Masks for Stransky #STR7202, #STR7201 / KP #KPM0215, #KPM0216..

New tooling kit for 1/72 T-2C Buckeye 'TOP GUN' Total 70 plastic parts with a decal and masking seal Detailed cockpit and wheel bay details, Decal printed in Korea Canopy mask included 2 A/C markings for the US Navy Adversary & Training Squadron VF-43 'Challengers' in NAS OCEANA, 1989 A4 8 Pages col..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by tracing all ..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Suggested kit: Most F-4E Phantom II kits in 72nd scaleRe-usable die-cut paint masksThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted ..

F-14A Tomcat VX-4 'Evaluators' Vandy 1 decal set for Academy 1/72 Total 2 A/C Makings for F-14A Tomcat BuNo. 159853 Canopy and wheel mask included AIM-9L & AIM-7F CATM stencils included Include A4 Size Colour printing Manual Decal Printed in Korea..

-C-130H Hercules 'JASDF' Conversion set for Italeri 1/72-Correct engine cowlings and fuselage fairings,-AAM sensors fairing and C/F dispenser pylons included,-8 Markings for JASDF C-130H,-Total 17 resin parts, PE G12and decal..

..

Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by tracing all ..

German WWI biplanes had an airspeed indicator that worked with an anemometer; the whole device was attached to the wing near the pilot, as can be seen in the old WWI photo on the right. With current modelling resins, in 1/48 and 1/32 scales, the narrow parts of the anemometer break easily, and the n..

Features: - S-3 Viking WIng Folded set for Italeri 1/48- Detailed folding wings and actuators,- Total 17 resin parts- A5 color printing manual included..

1/48 KAI FA-50 Golden Eagle 'ROKAF' (Premium Edition Kit) Sprue parts from Academy Plastic Models Total over 150 plastic parts 20 Resin parts, Color PE / Brass PE parts and Decal Canopy & Wheel Masking seals included, 5 A/C markings for the ROKAF FA-50 A4 color 14 pages book manual included..

-Rafale SNECMA M88-2 Engine nozzle set for Revell 1/48-Master parts by 3D modelling,-Total over 6 Resin parts-A5 color printing manual included..

Thunderbolt Mk.II 'RAF' (Premium Edition Kit) Sprue parts by Academy Plastic models, Total over 90 plastic parts with 2 PE (Color printing & Brass) 3 A/C markings for the RAF in the CBI & Mediterranean Operation Canopy Masking seal included, Decal printed in Korea A4 color printing manual included..

Re-usable die-cut mask setThe set includes three sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can ..

Masks for ICM #48151, #48153, #48154, #48155 w/Wheels Masks..