Model Planes

This is an airframe update set for Kitty Hawk's FJ-2 Fury. It includes a new intake nose ring with a corrected shape (the kit's nose is much too blunt) and cast-on one-piece air intake front part. There is detail scribing on the inside of the nose ring (absent on the kit parts). The nose wheel well ..

Type: water-slide decalsHow to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting m..

Type: water-slide decals1. 2nd figher-bombing squadron. Port-Harkort, Nigeria, 1969 NAF612 served in 2nd figter-bombing a squadron and concerned the second party MiG-17F (NAF611 - NAF614), received in April, 1968 from the USSR through Poland. The plane initially hasn't been painted, but already bore..

Type: water-slide decals1. MiG-17. Has been exposed in Kiev, 70.2. MiG-17F. The participant intrusion into Czechoslovakia in 1968. The non-standard four-unit board number.3. Mig-17 PF of 146th Guard Air Regiment of USSR Air Defence. Vasilkov,19574. Shenyang J-5 (MiG-17F) 2011 of Ngo Due Mai, 923rd ?..

Type: water-slide decalsHow to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting m..

Stabilator for all types of F-4 Phantom that used the unslotted stab. For both the Hasegawa and Academy kits. Includes separate PE pivot cover plates and stiffener "fishplates" (for Air Force variants). The stabs can be used as a drop fit replacement for the kit parts or, with some work on the kit p..

This is an upgrade set for Zoukei Mura Phantoms. As per the kit, the stabilators can only be mounted in one (or two) position(s). With this set, you can set the stabilators in any position of your choice and improve the detail on the stabilator pivot cover plates as well. Also included are the reinf..

Stabilator for all types of F-4 Phantom that use the slotted stab. For both the Hasegawa and Academy kits. Includes separate PE pivot cover plates and stiffener "fishplates" (for Air Force variants). The stabs can be used as a drop fit replacement for the kit parts or, with some work on the kit plas..

Type: water-slide decalsHow to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting m..

This is a set of aft fuselage half parts that correct the shape error on the engine shoulders of the Zoukei Mura short nose Phantoms. in addition to the re-shaped geometry, some surface detail has been improved. Please note that this is not a drop-fit replacement set. Cutting of the fuselage is requ..

F-4 Phantom C/L pylon, 1:48, for the Zoukei Mura line of kits. The pylon fit on and into the detail moulded onto the ZM lower wing surface. It comes with two sets of separate pins - one for the larger stabiliser pins and the smaller sway brace pins that connect to the stores to be mounted...

Detail parts for the inner canopies on F-4 Phantoms. The set comprises of resin and PE parts for windscreen, forward-, centre- and rear canopies and includes canopy actuator jacks, safety uplocks (optional installation), detailed downlocks, forward and rear compasses and various detail parts for the..

Corrected A/C air intakes for Academy's F-4 Phantom series (F-4B, C and D so far). Drop fit resin replacement. All it takes is a little superglue and a swipe of filler to blend it in...

..

This is a set of two SR-1 seats for the new Revell 1:48 SR-71. The seats are very accurate in dimension and detail and have been fully CAD designed. The two seats in the set are not identical in the draping/positioning of the belts and hoses. One modification to a detail on the seat was made to adap..

Type: water-slide decals1. F6F-3 No,5 'Ruthless' flown by Lt Oscar I. 'Oc' Chenoweth Jr XO VF-38, Segi Point New, Georgia, August, 1943.2. F6F-5 BuNo.58937 No,12 flown by Lt(jg) Arthur Ray 'Hank' Hawkins of VF-31, USS Cabot, September, 1944.3. F6F-3 BuNo.40467 No,19 flown by Lt(jg) Alexander Vraciu ..

This is a corrected nose intake part for the Kitty Hawk FJ-3 Fury kit. It is a drop-in replacement for the kit part and features a corrected nose profile, in particular around the upper lip where the small radome is located. The kit part is too blunt, in the same way as the FJ-2 part is. The panel l..

Type: water-slide decalsHow to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting m..

A set of two Martin Baker Mk. H5 ejection seats for early F-4B, F-4C and F-4D Phantoms (until around 1970). Suitable for and tested with Academy, Hasegawa and Zoukei Mura kits. The seats have cast on seat belts which differ from each other...

Dewoitine D.520 with 2 Squadron GC III/6. Algiers, spring 1942 year...

This is a resin Canberra PR.9 and B(I)8 canopy in 1:48 scale with the correct circular cross section that replaces the Airfix canopy which has an incorrect "U" cross section. As the correct cross section is circular, the offset position makes it "tuck under" on the left side and that is not represen..

..

Type: water-slide decals1. Firefly F.Mk.I "Evelyn Tentions" Unit: 1771 NAS, FAA No. 275/N (DK431) Usual pilot: Sub-Lieutenant P.H.Dawton. HMS Implacable, British Pacific Fleet, March-April 1945. One notes red L on the landing gear door, reminiscence of the former code of the plane '4L'. The plane ha..

This is a set of two individually detailed Martin Baker Mk. GRU5 seats in 1:48 for A-6A, EA-6A and A-6E Intruders (used until about the mid 70s, when replaced by the GRU7), designed and sized for the Hobby Boss cockpit. I can't say if it will fit the Revell EA-6A. The belt and hose arrangement is di..