Model Planes

Product Type: 3D Decals Equipment Type: Seats (not included)3D Decals Instructions - Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model. - For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface. - A..

Product Type: 3D Decals Equipment Type: Seats (not included)3D Decals Instructions - Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model. - For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface. - A..

German WWI biplanes had an airspeed indicator that worked with an anemometer; the whole device was attached to the wing near the pilot, as can be seen in the old WWI photo on the right. With current modelling resins, in 1/48 and 1/32 scales, the narrow parts of the anemometer break easily, and the n..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Resin Turnbuckles Anchor Point 1/32 (Contains 100 items)..

Mini Mask series - containing masks for painting aircraft cabinsType : Paint MaskHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on th..

2 canopy masks(outside & inside) + 2 insignia masks..

Set contains 3D-printed parts and coloured seat belts to build 2 seats...

2 canopy mask (outside & inside) + 2 insignia masksType : Paint MaskSuper Mask Series - contain masks for painting cabins and stencils for distinctive paintings based on photos and other primary sources. Super Mask series also contains colour airplane drawings in four projections depicting the place..

2 canopy masks (outside & inside) + 2 insignia masks + decalsType : Paint MaskSuper Mask Series - contain masks for painting cabins and stencils for distinctive paintings based on photos and other primary sources. Super Mask series also contains colour airplane drawings in four projections depicting..

This set contains: 1 canopy masks(outside) + 2 insignia masksHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask su..

..

Set contains 3D-printed parts for detailing 1 engine.Applications: Brewster XA-32, Breguet Deux-Ponts, Canadair CL-215, Canadair C-5 North Star, Consolidated TBY Sea Wolf, Convair 240, 340, and 440, Curtiss P-60, Curtiss XF15C, Curtiss C-46 Commando, Douglas A-26 Invader, Douglas DC-6, Fairchild C..

Paint Mask: Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Product Type: 3D Decals Equipment Type: Seats (not included)3D Decals Instructions - Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model. - For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface. - A..

Set contains parts for detailing of seat belts for the helicopter models Mi-24...

Product Type: 3D Decals Equipment Type: Seats (not included)3D Decals Instructions - Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model. - For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface. - A..

..

..

2 canopy masks(outside & inside) + 2 insignia masks..

2 canopy masks(outside & inside) + 2 insignia masks..

Set contains parts for detailing of seat belts for Martin-Baker Mk.10 seats.Use for aircraft models Aermacchi MB-339, Aermacchi S-211, AMX International AMX, Atlas Cheetah, BAE Hawk, British Aerospace Sea Harrier, CASA C-101, Chengdu JJ-5, Chengdu J-7, Guizhou JJ-7, Dassault/Dornier Alpha Jet, Das..

Set contains 3D-printed parts and coloured seat belts to build 3 seats for the aircraft model B-26 Marauder...

Set contains 3D-printed parts for build 2 pcs "M18 gun pod with M134 Minigun"...