Print Scale 72-152 1/72 Wet Decals - Supermarine Seafire (1 sheet)

Type: water-slide decals
1. Seafire Mk lb, Bl676 ??Bondowoso??, after conversion by Air Service Training Ltd., Hamble, 1942.
2. Seafire Mk lb MB345/K ,No.885 Naval Air Squadron, Fleet Air Arm, HMS Formidable, February 1943.
3. Seafire Mk lb Nx957 (ex-AD368)/G1 A ,No.761 Naval Air Squadron, Fleet Air Arm, Henstridge, March 1943.
4. Seafire Mk lb NB 335 /E3-Y, No.731 Naval Air Squadron, Fleet Air Arm, Easthaven 1945.
5. Seafire Mk lb MB 340, flown by Lt Commander Duncan Hamilton, Port Reitz, Kenya.Royal Blue overall with Blue/ White roundels in six positions, White/Blue fin flash. White spinner, fuselage flash and lettering. This was his personal ??barge??, and MB 340 was
converted from Spitfire Mk Vb BL 689.
6. Seafire Mk llc, MB 240/7-B, No.899 , Naval Air Squadron Fleet Air Arm HMS Indomitable, 1943.
7. Seafire Mk llc, LR 642/8-M, No.807 , Naval Air Squadron Fleet Air Arm HMS Battler, July 1943.
8. Seafir

How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.