Model Motorcycles

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket nut (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Quick disconnect coupler for hydraulic systems at 1/12 scale, like those used for draining oil on Moto GP bikes. Made in resin by means of 3D printing with the usual quality of DECALCAS products, so that you only have to paint and glue on your scale model. These scale quick disconnect coupler reprod..

Long springs with shock absorber reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring, the rubber that protects it, and th..

Long springs reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so ..

Lambda probe at 1/12 scale. Made in resin by 3D printing, they reproduce all the details with the usual quality of DECALCAS products, so you only have to paint and glue on your scale model.Family: Detail Scale: 1/12 Reference: DCL-PAR092 Item: Lambda probe - Type 1 Includes: 3D printed parts Parts..

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC005 Item: Kawasaki Ninja ZX-RR Includes: vacuum formed parts To be used with: Tamiya reference TAM14109..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC011 Item: Kawasaki Ninja H2R Includes: vacuum formed parts To be used with: Tamiya reference TAM14131..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC018 Item: Kawasaki Ninja H2 Carbon Includes: vacuum formed parts To be used with: Tamiya reference TAM14136..

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket), - central nut...

Kit contains: - chain with sprockets (precut and ready for painting), - rear sprocket mounting plate, - rear sprocket screws (spare parts included)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Set of 50 electrical wiring connector which will raise level of detail of your model on the next level. Kit contains: - 10 connectors of A type - 2 holes on each side (dim. 1 x 1.7 x 3 mm) - 10 connectors of B type - 4 holes on each side (dim. 1.7 x 1.7 x 3mm) - 20 connectors of C type - 1 hole on e..

Dzus type quick release fasteners with large rhomboid base (Type 2) at 1/12 scale, with a width of 3,6mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.8mm diameter support rod for mounting, which will allow you to fi..

Dzus type quick release fasteners with rhomboid base (Type 1) at 1/12 scale, with a width of 3mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.8mm diameter support rod for mounting, which will allow you to fix them w..

Kit contains: - clutch with visible discs, - clutch basket, - external cover with mounting holes corresponding to the engine block design, - set of screws (spare elements includes)...

Pre-cut paint mask in repositionable, low-adhesion paper, which fits over the transparent part of the dome (part E7) of the Tamiya kit to protect and correctly complete the painting process of its edge in black.Family: Masks Scale: 1/12 Reference: DCL-MSK021 Item: Ducati Superleggera V4 Includes: ..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC006 Item: Ducati Desmosedici GP4 Race: Motorcycle World Championship 2003 Includes: vacuum formed parts To be used with: Tamiya reference TAM14101..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC002 Item: Ducati 1199 Panigale S To be used with: Tamiya references TAM14129 and TAM14132..

Set of hood latches with pin for 1/12 scale models. Includes a total of 12 closures made of resin by 3D printing. It includes 4 different positions of the closure lock so that you can give more realism to your models, by not repeating the same configuration in all the closures.Family: Bonnet pins ..

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Set of 24 inflation valves angled at 90, in 1:12 scale, produced using 3D printing, which faithfully reproduces this type of valves increasingly used in modern motorcycles. With the usual quality of Decalcas products, and the convenience of not requiring the use of primer, avoiding the loss of detai..