Model Motorcycles

BIKE No.45Customized Z750FX with special parts is modeled in 1/12 scale! Precisely replicated megaphone-type muffler, back step, oil cooler, etc. Metal screws are used for the stem and axle to ensure strength and ease of assembly. Throttle wires, brake hoses and other parts are reproduced in vinyl p..

BIKE No.72More "custom-spec" Monkey is now available!Custom specifications based on the 1978 Monkey model Various custom parts such as muffler and seat are included. Rubber tires are used to enhance the quality feel. Vinyl pipes are used for the wires...

BIKE No.73More "custom spec" Gorilla model is now available!Customized version based on the 1978 Gorilla model is reproduced! Various custom parts such as oil cooler and seat are included. Rubber tires are used to enhance the quality feel. Vinyl pipes are used for the wires...

BIKE No.53Replicated in the 1992 model CB400SUPER FOUR Custom parts such as inverted front forks and muffler included Rubber tires for enhanced quality Vinyl pipes are used for wires and hoses...

BIKE No.9Replicated the 1989 NSR250R model in 1/12 scale Modeled in the genuine "Black x Seed Silver Metallic" color scheme. Reproduction of the cowl, chamber and undercarriage which are different from 1988 model. The axle and stem are designed with metal screws to ensure strength and ease of assemb..

BIKE No.81/12 scale model of the 1988 NSR250R model with the body colors commonly known as "Red Terra/Blue Terra Selectable between the factory colors "Fighting Red/Loss White" and "Terra Blue/Loss White". Metal springs are used for the rear suspension. Metal screws are used for the stem and axle to..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.As soon as it was released in 1979, the Honda CB750F went on to be an instant best seller. The CB750F now comes reproduced as a plastic assembly model k..

BIKE No.65Reproduction of the 2006 Ape 50 Takekawa specs. Various custom parts such as muffler and seat are included. Snap-fit system that does not require any adhesives. The axle is designed with metal screws to ensure strength and ease of assembly. Vinyl pipes are used for wires and hoses..

** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.The Honda CB750F Motorcycle first appeared on the Japanese market in June 1979 and was shortly the best seller in the 750 motorcycle class. Just ten yea..

Short and long springs reproduced at 1/9 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exha..

Short and long springs reproduced at 1/9 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exha..

Lambda probe at 1/9 scale. Made in resin by 3D printing, they reproduce all the details with the usual quality of DECALCAS products, so you only have to paint and glue on your scale model.Family: Detail Scale: 1/9 Reference: DCL-PAR141 Item: Lambda probe - Type 1 Includes: 3D printed parts Parts: ..

Set of 16 inflation valves angled at 90, in 1:9 scale, produced using 3D printing, which faithfully reproduces this type of valves increasingly used in modern motorcycles. With the usual quality of Decalcas products, and the convenience of not requiring the use of primer, avoiding the loss of detail..

Windshield Family: Vacuum formed parts Scale: 1/20 Reference: DCL-VAC004 Item: Lotus Ford Type 88 To be used with: Ebbro reference EBR20011..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC003 Item: Yamaha YZR-M1 To be used with: Tamiya references TAM14117, TAM14119 and TAM14120..

Kit contains: - steering damper and adjusting cap, - front fork parts one on each side, - piston rod handle (spare elements includes), - set of screws (spare elements includes), - metal rod as piston rod...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Fairing windshield and anti-slip fuel tank pads for the Suzuki GSX-RR, made of 0.2mm thick transparent laminated material that replaces the transparent plastic parts of the kit, and decals with a 3D effect. The windshield is already die-cut, adjusting to the model without the need of further modific..

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...