Humbrol 003E Enamel Paint - Brunswick Green Gloss (14ml)

Discontinued

Usage:
A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour).

Substrate:
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability).

Coverage:
14ml tin covers approx. 0.3 square metre depending on thickness of application.

Application:
Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry.

Drying Time:
Gloss: 1-2 hours
Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry.
Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight).

How to clean:
Brushes: use Humbrol Enamel Thinners
Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

General Info
Scale	Non-Scale
Type	Paint
Subtype	Bottle Paint
Paint Type	Enamel
Minimum Age	14 Years

Stock: Out Of Stock
Reward Points: 5
SKU: HUM-003E

Humbrol

Road Transport ONLY (Cannot be shipped by Express Post or Airmail)

This item is currently unavailable

It has been discontinued or is indefinitely out of stock. Unfortunately, we are uncertain if or when it will be available again. For further information or assistance in finding equivalent products, please feel free to submit an enquiry.