Flying Leathernecks
Brand: Flying Leathernecks
SKU: FL48-8007
Mk-77 Fire Bombs, set of four (4)Items are 3D printed and come ready to paint. Some very light sanding of the forward section may be necessary to remove remnants of printing supports.Simply paint natural aluminum and install!..
US$11.79
Brand: Flying Leathernecks
SKU: FL48-8006
Mk-76 practice bombs (12 per pack)These new 3D printed bombs come ready to paint and install. Some very light clean up may be necessary at the aft end of the fins to remove any trace of the printing supports.Simply paint FS35109 Blue and install!..
US$7.39
Brand: Flying Leathernecks
SKU: FL48-8074
While we have an extensive line of ordnance, we also understand that some modelers are perfectly content using the bombs provided in the kits. In some cases, the fuzes included with them leave a lot to be desired and may not be what you'd like to depict.This set provides 24 Mk-43 TDD (Target Dete..
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8072
While we have an extensive line of ordnance, we also understand that some modelers are perfectly content using the bombs provided in the kits. In some cases, the fuzes included with them leave a lot to be desired.This set provides 24 M904 nose fuses that will help enhance those kit supplied bombs..
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FLV48011
This set includes the detonation cords for the forward and aft canopy pre-cut in self adhesive gray vinyl. Designed to fit the canopy of the Kinetic kit...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8043
Set of four (4) 3D printed launchersThe LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft...
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8039
In February of 1964, the LAU-7A/A was introduced as a USAF version of the LAU-7/A that incorporated provisions for launching the TDU-11/B Target Rocket.The LAU-7A/A was used interchangeably with the Aero-3B on USAF F-4C/D/E Phantoms.The standoff adapters in this set are designed to fit the Zouke..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8044
This set includes four (4) LAU-7/A-6 AIM-9 launchers designed to fit the pylons in the ZM F-4S. Used from 1988 to 1991..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8042
In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6.Over the course of the next several years, numerous AAC's changed the designation of the launcher to B/A, A-7, B/A-1, as well as a few others. However, all of these changes were either..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8030
This set includes four (4) launchers designed to fit the Tamiya F-4 wing pylons in anticipation for later variants. This launcher was used from 1976 to 1987..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8041
Set of 4 LAU-7 Missile Launchers designed to be used on the Zoukei-Mura F-4J. With little modification, can also be used on the Academy F-4J and Hasegawa F-4JOur sincere thanks to Gerry Whiteside and Bill Arndt for their assistance with research.Master CAD files produced by Richard VanZandt..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8029
This set includes four (4) missile launchers designed to fit the Tamiya F-4B pylons and were used from 1969 to 1975...
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8040
Set of 4 LAU-7 Missile Launchers designed to be used on the Zoukei-Mura F-4J. With little modification, can also be used on the Academy F-4B/N/J, Hasegawa F-4B/N/J and Tamiya F-4B.Our sincere thanks to Gerry Whiteside and Bill Arndt for their assistance with research.Master CAD files produced by..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8016
This set includes four (4) empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft.Rocket tubes are hollow the entire length of the pod to dep..
US$11.79
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8077
Designed by Petr Haupt, this set includes two (2) LAU-33 Pods, four (4) Mk-71 Rocket Motors, four (4) Mk32 Mod 0 anti tank / anti personnel warheads with Mk188 Impact Fuzes and four (4) Mk32 Mod 0 warheads with Mk93 proximity fuzes..
US$11.79
Brand: Flying Leathernecks
SKU: FL48-8076
This set includes four (4) LAU-33 dual 5.00" Rocket Launchers with empty tubes.Used by the F-4 Phantom, F-8 Crusader, OV-10 Bronco..
US$11.79
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8090
This set includes four (4) missile launchers in medium gray 3D printed resin.Missiles come as shown with print supports removed. Some very minor sanding to smooth areas where supports were located may be necessary.Launchers designed by Richard VanZandt of Flight Line Resin..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8052
These Missile Launchers are designed to fit the Hasegawa F/A-18E/F wing tip and work perfectly with the Meng kit with one small modification to the kit part.Launchers come as shown and only a light sanding of the aft end to remove the support nibs is required. Integrated formation light panel fit..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8051
These Missile Launchers are designed to fit the Hasegawa F/A-18E/F wing tip and work perfectly with the Meng kit with one small modification to the kit part.Launchers come as shown and only a light sanding of the aft end to remove the support nibs is required. Integrated formation light panel fit..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8068
Set includes four (4) launchersUse for early F/A-18E/F..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8060
Set includes four (4) launchersUsed to carry and launch AIM-9X and AIM-120B/C..
US$9.75
