Fujimi Equipment-202 1/200 Battleship Yamato Bridge Photo-Etched Detail Parts

Collectible equipment release: A set of genuine manufacturer parts specifically designed to realistically upgrade and reproduce the bridge of the 1/200 battleship Yamato. Based on the final configuration in 1945, this parts set includes the distinctive Type 21 radar and other parts. All parts are made of photo-etched metal.

- The top of the bridge can be completely replaced with a photo-etched part for the Type 21 radar.
Includes direction-finding antenna, forward scaffolding for the rangefinder, rear reinforcing beam, and cover for the rangefinder lens (open position).
- Each Type 21 radar is meticulously reproduced by combining 12 parts.

- The upper part of the bridge can be made more precise by adding or replacing distinctive parts such as the yard and rear stairs.
- The E27 reverse-finding antenna is designed to fold and reproduce its thick shape.
- The radio telephone antenna yard on the rear has the appearance of steel with lightening holes.

- Parts are included to correspond to each piece of equipment around the compass bridge.
- Includes detailed parts for fittings such as the hatches of the machine gun firing systems and the shutters of the searchlight control systems.
- Includes the ladder on the front of the compass bridge and the periscope hatch on the top of the conning tower.

- Multiple parts are provided to give the lower wall of the bridge a three-dimensional look.
- Includes photo-etched rivet bands that connect to the lower part of the conning tower wall.
- The air intakes to the engines are represented by separate mesh and lattice structures, resulting in a very three-dimensional part.
- Includes numerous metal replacement parts for ladders, landings, hatches, and other items near the signal station deck.
- Parts for the 25mm triple machine gun armour, aiming rings, and seats are provided to help create a three-dimensional effect.

- A set of two sheets: one containing parts for ladders and handrails, which are the basis for upgrading, and another containing parts for unique shapes.
- The etching parts come in a set of two sheets, each a large size of approximately 18 x 10 cm, and contains approximately 185 types of parts. The sheet thickness is 0.15 mm, achieving a balance between appropriate strength and flexibility.

Contents included:
- Etching parts x 2
- Instructions x 2

*Contents as of January 2021.

Since these are metal parts, painting is required. For bonding, please use either super glue or rubber-based adhesive depending on the area being bonded.

Please note that due to monitor and image resolution issues, the colour may appear different from the actual product.