A 720th MP Btn. set for those who wants to model a variety of vehicles instead of all V100s. Covering "BEEP BEEP YOURAS" which used to be "FEELING GROOVY" from set D356063, and a M113A1 track, christened "BOUNTY HUNTER". Both vehicles seems to use the commonly seen yellow/green shield judging from the fine details (shape, text, guns, etc).
As the black markings were thin-outlined with white, they have been separated from the yellow/green shields as it is nearly impossible to get every print perfectly registered without sacrificing many
The artworks on both vehicles' front are painstakingly captured down to the last detail.
This set also comes with patches and insignias for the MP's brassards.
How to apply water-slide decals: 1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them. 2. Cut out the decal you need (do it on cutting mat) 3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds. 4. Remove the decal from the water and place it on paper towel to remove any excess water. 5. Apply decal solution to the part where the decal is to be placed. 6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal. 7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.) 8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.