AMMO by Mig Jimenez 2424 A-STAND Hotmetal Lacquer - Hot Metal Carbon (30ml)

The A-Stand Hot Metal line has been formulated to simulate the iridescent burnt metal tones created by the high temperatures generated by aircraft jet engines. They can also be very useful to simulate this effect on exhaust pipes or any other metal element affected by heat and exhaust gasses. You must keep in mind that if you apply a larger amount of product, the effect will be more intense.

Why use A-Stand?
The great fluidity of A-Stand products makes them very easy to airbrush without clogging the airbrush. They also offer great resistance once dry, allowing them to perfectly withstand any other type of lacquer, enamel, or acrylic paint, as well as any type of weathering products. In addition, A-Stand paints resist without any problem the special masking tapes for model making.

A-Stand products have a short drying time to the touch, approximately 30 minutes. Apply in thin coats, allowing 30 minutes between coats. Do not puddle the surface and allow to dry completely for at least 24 hours. If you wish to accelerate the drying time, you can add 30% of A-Stand thinner. The thinner of these paints and varnishes, like all other lacquer or enamel type products, are only suitable for use with an airbrush, not with a brush.

You may refer to this video by AMMO to learn more about Hot Metal Lacquers.

The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.
Always clean and dilute with A-Stand Airbrush Thinner & Cleaner A.MIG-2013.

* Remember that all lacquer paints contain toxic components and it is advisable to use a mask for their application, and to spray these products in a well-ventilated area.

** For customers seeking alternatives to discontinued Alclad products, we recommend AMMO's A-Stand range. Manufactured in the same facilities by the same expert team, A-Stand products ensure a seamless transition with comparable high-quality finishes.