Decalcas

Set of 700 allen type cylindrical head screws like those used in the assembly of mechanical parts and components, of diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 0,9mm, 1mm and 1,2mm (100 units of each of the different measurements), with which to detail any part where this is located type of screws in ..

Set of 200 wide round head screws with hexagonal slot (Allen head) such as those used to fasten fairings, with diameters of 1.75mm, 2mm, 2.25mm and 2.5mm (50 units of each of the different sizes), with which to detail any part where this type of screws are found in your vehicles. With the usual qual..

Short and long springs reproduced at 1/9 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exha..

Short and long springs reproduced at 1/9 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exha..

Lambda probe at 1/9 scale. Made in resin by 3D printing, they reproduce all the details with the usual quality of DECALCAS products, so you only have to paint and glue on your scale model.Family: Detail Scale: 1/9 Reference: DCL-PAR141 Item: Lambda probe - Type 1 Includes: 3D printed parts Parts: ..

Set of 16 inflation valves angled at 90, in 1:9 scale, produced using 3D printing, which faithfully reproduces this type of valves increasingly used in modern motorcycles. With the usual quality of Decalcas products, and the convenience of not requiring the use of primer, avoiding the loss of detail..

Tyre sidewall white chalk marking decals in 1/43 scale: An extensive decal sheet with a variety of white numbers and markings such as those commonly found on Formula 1 and GTs car tires. Includes inscriptions such as "practice", "set", "test" and are also valid for your 1/32 scale cars.Family: Log..

This type of kevlar, with a slightly greenish appearance, imitates the real-world "Plain Weave 3k Carbon Kevlar" fabric used in the light parts of competition vehicles. It is perfectly valid for use in scale models 1/12, 1/20 and 1/24. The decal has been printed by Cartograf with the latest and most..

Resin made push button in 1/20 and 1/24 scale, perfect for use in cars, motorcycles and trucks. Each package includes 28 switches.Family: Detail Scale: 1/24 Additional scales: 1/20 Reference: DCL-PAR044 Item: Push button type 03 Includes: resin parts Parts: 28 units..

Paint masks for all windows.Family: Window frame pre-cut paint masks Scale: 1/24 Reference: DCL-MSK009 Item: Toyota Celica Twincam Turbo TA64 Includes: paint masks To be used with: Beemax Model Kits references B24004, Aoshima 084564, B24011, Aoshima 103142, B24021, AOS10607 and 10607..

Give your model an extra dose of realism with these hood latches with quick release security, known colloquially in the racing world as "fridge latches", made in 1/24 scale and manufactured using 3D printing. These latches are designed in detail, allowing the possibility of mounting them in an open ..

Paint masks for all windows.Family: Window frame pre-cut paint masks Scale: 1/24 Reference: DCL-MSK013 Item: Renault Estafette Includes: paint masks To be used with: Heller references 80742 and 80743..

Porsche Kremer 935 K3 sponsored by Wera during its participation at the 24 Hours of Le Mans in 1981.Family: Marking / livery Scale: 1/24 Reference: DCL-DEC036 Item: Porsche Kremer 935 K3 Team: Wera Weissberg Sponsor: Wera Weissberg Number: 61 Drivers: Edgar Doren + Gerhard Holup + Jurgen Lassig ..

Set of masks to accurately paint the pink stripes located on the front hood, roof and rear wings of the Gozzy version on the body of the Nunu kit. This way you will achieve the perfect finish that this beautiful kit deserves!Family: Masks Scale: 1/24 Reference: DCL-MSK014 Item: Porsche Kremer 935 ..

Porsche Kremer 935 K3 sponsored by Sasch during its participation at the 24 Hours of Le Mans. This car finished first in IMSA group.Status: Production ending (remaining stock) Family: Marking / livery Scale: 1/24 Reference: DCL-DEC038 Item: Porsche Kremer 935 K3 Sponsor: Dick Barbour Racing Number..

The absolute winner of the Marlboro Cup at Zolder circuit in 1978. This set includes decals and paint masks.Family: Marking / livery Scale: 1/24 Reference: DCL-DEC023 Item: Porsche Kremer 935 K2 Team: Willeme Number: 73 Drivers: Claude Bourgoignie Race: Deutsche Rennsport Meisterschaft DRM Marlbo..

The Kremer Porsche with Ricoh livery that finished 24th after 182 laps.Family: Marking / livery Scale: 1/24 Reference: DCL-DEC022 Item: Porsche Kremer 935 K2 Team: Kremer Racing Sponsor: Ricoh Number: 45 Drivers: John Winter + Dieter Schornstein + Philippe Gurdjian Race: 24 Hours Le Mans 1978 I..

Paint masks for all windows.Family: Window frame pre-cut paint masks Scale: 1/24 Reference: DCL-MSK006 Item: Porsche 935 K2 Includes: paint masks To be used with: Beemax Model Kits references B24015, 105108 and aos10510..

..

Decals for the decoration of the Porsche 934 RSR used in the last championship race of the SCCA Trans-American Championship held in 1976 at the Canadian circuit of Trois-Rivieres, where George Follmer with the number #16 not only won the race, but also was crowned the winner of the championship. We ..

Livery for the Porsche 917K of the Porsche Salzburg team that raced the 1000 km BOAC under torrential rain on April 12,th 1970 at the Brands Hatch circuit, with Vic Elford and Denny Hulme at the controls, finishing in second position. The decal has been printed by Cartograf with incredible accuracy...

Livery corresponding to the Porsche 917K that raced in the 9 Hours of Kyalami in 1970 with number 1, driven by John Love and Richard Attwood. It has been designed for the Fujimi kits and printed by Cartograf. This Porsche raced with Ferrari front rims instead, since cracks were detected in the Porsc..

Peculiar livery for David Piper's Porsche 917K with the number #4 in his participation in the 9 Hours of Kyalami in 1971. The decal has been printed by Cartograf with incredible accuracy and gold ink.Family: Marking / livery Scale: 1/24 Reference: DCL-DEC045 Item: Porsche 917K Team: David Piper Sp..

Family: Marking / livery Scale: 1/24 Reference: DCL-DEC058 Item: Porsche 911 Sponsor: Magnus Walker Number: 277 Includes: water slide decals and assembly instructions To be used with: Fujimi references FJ126586, 126586 and RS-26..