Hobby & Model Paints

The varnish has been formulated especially for airbrushing; it dries very fast and does not leave fingerprints ("no tack"). Gloss Varnish 77.657 can be applied directly or diluted with distilled water or Thinner 71.261. In some cases, a layer of varnish is enough but if more layers are required, an ..

Good news for those who want to paint a beautiful red metallic candy coat. After improving the ingredients of the paint, we have created slight yellowish CLEAR RED with a high transparency. Metallic candy finish can be achieved by applying a coat over a silver painted base. Of course, it can be used..

..

Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each), if required you can build up multiple layer to suit your required level of g..

Foaming cleaner that will remove effortlessly unsightly dirt & oily grime on models, pit boxes, tools etc. Its unique micro emulsion formula is non-flammable & designed to penetrate deeply, loosen & remove surface contaminants leaving a clean gleaming surface.Grime 2 ShineIs water based, non fl..

This formula acrylic colours with a satin finish, extra resistant and impact proof especially designed for airbrushing surfaces exposed to aggressive manipulation. The advanced formulation contains a revolutionary component which guarantees exceptional adherence on even the most difficult surfaces, ..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

Looks Like Glass is a super- thin, water- based, transparent fluid for the creation of a smooth glass-like effect on kit plastics such as clear canopies. Plastic parts are simply dipped and allowed to dry for 2-3 hours. Surface detail is retained. Looks Like Glass can be used for the following mode..

Use it when maximum transparency is needed to add luminosity and depth to your models. This is the best medium to create glazes since it provides maximum transparency to the colour and improves its brightness. This allows thin layers of highly transparent colour to be built up without changing the h..

UsageA solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, mid-sheen satin/eggshell finish.SubstrateCommon plastics used to manufacture model kits including polystyrene and ABS, as well as MDF..

..

60ml in a plastic squeeze bottle, water-base, quick-drying, permanent, clear-coat resin.More resistant than the normal acrylic varnish...

..

For more info about Zero paints, please read Zero Paints Colour Description.pdfMatt / Flat 2 Pack Clear Coat for use on various models requiring a matt protective finish.Contents :100ml Matt Clear Coat (Medium Solid) also known as Urethane or Polyurethane (Supplied in Glass Bottle) 25ml Harden..

The water-based version is finally available for the surfacer!It is a water-based surfacer developed based on the renewal version of water-based hobby colour released last year.It has less solvent odor and is safer.It is an epoch-making product that can fill scratches on the surface and prepare the ..

The water-based version is finally available for the surfacer!It is a water-based surfacer developed based on the renewal version of water-based hobby colour released last year.It has less solvent odor and is safer.It is an epoch-making product that can fill scratches on the surface and prepare the ..

It is an aqueous coating agent with UV protection component. It can reduce fading of colours by ultraviolet rays...

For more info about Zero paints, please read Zero Paints Colour Description.pdfClearcoat Lacquer 250ml - Pre-thinned ready for AirbrushingInstructions for use : Leave the basecoat colour for 15/30 minutes before applying clear coat, then apply 1 mist (tack) coat, after 5/10 mins you can apply fur..

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

SubTerrain Road System Video Smooth-It Video Smooth-It is a plaster material that is used to smooth rough spots, create streets, roads and parking lots. Mix with water and apply directly to any clean hard surface.One carton covers approximately an area 26' by 6" by 1/16" (7.92 m x 15.24 cm x 0.6 c..

Easy Guide to all 17 Mod Podge Formulas VideoEnhance your projects with an intense glitter finish with a shimmering, lustrous shine using Mod Podge Mega Glitter. Layer coats for dramatic sparkle. Dishwasher-safe. Works well on jewellery, fashion accessories, decor projects and more...

Easy Guide to all 17 Mod Podge Formulas VideoEnhance your projects with an intense glitter finish with a shimmering, lustrous shine using Mod Podge Mega Glitter. Layer coats for dramatic sparkle. Dishwasher-safe. Works well on jewellery, fashion accessories, decor projects and more...

Easy Guide to all 17 Mod Podge Formulas VideoAdd a touch of sparkle to your decoupage projects! Waterbase formula dries fast & clear, holds tight, protects and gives a smooth finish. Great for all-around crafts and kid's projects...