Hobby & Model Paints

..

Water-based thinner specifically designed for use with Ammo acrylics, but compatible with other acrylic brands as well. Non-toxic and odorless...

..

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling...

For more info about Zero paints, please read Zero Paints Colour Description.pdfLeave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each..

For more info about Zero paints, please read Zero Paints Colour Description.pdfMetal Primer 60ml Pre-thinned ready for Airbrush use.Drying Time Air drying at 20 C: - Dust free: 8 - 10 min. - Handling: 20 min. - Through drying: 60 min. If required sand using 3600 grade or higher Micromesh or Ultra..

60ml of Matt 1K High Quality Pre-thinned Clearcoat Lacquer supplied in a glass bottle.Dries clear even over whiteInstructions for use : Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommende..

For more info about Zero paints, please read Zero Paints Colour Description.pdfImproved adhesion to Plastic Parts Smooth Finish Supplied in Glass Jars for long shelf life Light Grey Colour - great under any colour basecoat Pre-thinned for Airbrushing Excellent Sealing Power Fast Drying Easy to Sand..

For more info about Zero paints, please read Zero Paints Colour Description.pdf100ml of 1K High Quality Pre-thinned Clearcoat Lacquer supplied in a glass bottle.Instructions for use : Leave the basecoat colour for 15/30 minutes before applying clear coat, then apply 1 mist (tack) coat, after 5/10..

Instructions for use : Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each)Air Drying Times at 20 C, Dust Dry : 30-40 mins Touch..

For more info about Zero paints, please read Zero Paints Colour Description.pdfPlease Note: During 2020/2021 Zero Paint has struggled to get the glass bottles they have used years. Now they have swapped to PET plastic bottles after testing. Despite the obvious difference in the visual size, the new..

For more info about Zero paints, please read Zero Paints Colour Description.pdf1x : 60ml /2 fl oz Bottle of Anti-Silicone Degreaser / Panel Wipe 1x : Lint free ClothThis is carefully formulated to provide a powerful, aggressive degreasing action that avoids any attack on existing paints, It is ve..

Aqueous colour Thinner is a safe remover with a pleasant citrus scent. Until now, you've had to use thinner to clean up your mistakes but the strong smell of thinner along with fast drying paint makes it hard to do the job right. Gunzes' Aqueous Paint Remover is guaranteed to remove paint without da..

APPLICATION GUIDE-PLASTIC MODELS: For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat. Apply..

..

Primers are formulated to provide the correct undercoating to bind the paint to the surface of the model. Primers are the important first step in the entire process of model painting.This primer can be applied directly by airbrush or paint brush. There is no need to thin the primer. It dry fast and ..

The new fully transparent r-PET (recycled/recyclable) plastic bottle is completely transparent, improves colour visualization and enhances AV's commitment to sustainability and the environment. In addition to the new bottle, the new cap includes a security seal...

The micro coat finishes are more than just a pretty look. This is one tough finish, and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. Even the micro coat flat and micro coat satin continue to look like new afte..

The micro coat finishes are more than just a pretty look. This is one tough finish, and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. Even the micro coat flat and micro coat satin continue to look like new afte..

Product to thin acrylic paints in semitransparent coats. 17ml jar.Water based thinner specifically designed for use with Ammo acrylics, also compatible with other acrylic brands as well. This is the necessary product for painting semi-transparent acrylic coats with brush or airbrush easily without c..

This formula acrylic colours with a satin finish, extra resistant and impact proof especially designed for airbrushing surfaces exposed to aggressive manipulation. The advanced formulation contains a revolutionary component which guarantees exceptional adherence on even the most difficult surfaces, ..

The varnish has been formulated especially for airbrushing; it dries very fast and does not leave fingerprints ("no tack"). Gloss Varnish 77.657 can be applied directly or diluted with distilled water or Thinner 71.261. In some cases, a layer of varnish is enough but if more layers are required, an ..

When polished, Mr. Metal Colour hobby paints reproduce the gleam of real metal, something no ordinary hobby paint can ever do. How do you obtain this effect? If applying Mr. Metal Colour hobby paint by brush, always paint in the same direction, e.g. left to right, or top to bottom. After the paint..

..